NSA/AOS/X1 - Reprocess: impactor, PSAP and dry nephelometer over period

An ingest problem resulted in no impactor data being ingested over the specified period. 
When these impactor data are reprocessed, impactor-dependent b1-level PSAP and dry 
nephelometer data should also be reprocessed over this period to ensure that the impactor state 
is correctly depicted in those products.

• base time in epoch(base_time)
• Impactor state in terms of aerodynamic diameter cut off(impactor_state)
• Pressure inside reference nephelometer(P_Neph_Dry)
• P_10um_hourly_average minus P_1um_hourly_average(dP_10um_minus_1um)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• Quality check results on field: Impactor particle size cut(qc_impactor_state)
• Relative humidity at the impactor inlet(impactor_inlet_RH)
• Hourly average of P_Neph_Dry when impactor state reports as 10. When state is
  10, the sample being measured is 10 um or smaller.(P_10um_hourly_average)
• Hourly average of P_Neph_Dry when impactor state reports as 1. When state is 1,
  the sample being measured is 1 um or smaller.(P_1um_hourly_average)
• lon(lon)
• Time offset from base_time(time_offset)
• time_in_seconds_since_volume_start(time)
• seconds since last impactor transition(seconds_after_transition)

• Impactor state in terms of aerodynamic diameter cut off(impactor_state)
• Quality check results on field: Aerosol total light scattering coefficient,
  nominal blue wavelength at dry or reference RH(qc_Bs_B_Dry_Neph3W)
• Quality check results on field: Pressure inside reference nephelometer(qc_P_Neph_Dry)
• Aerosol back-hemispheric light scattering coefficient, nominal red wavelength at
  dry or reference RH(Bbs_R_Dry_Neph3W_1)
• time_in_seconds_since_volume_start(time)
• Quality check results on field: Temperature, reference nephelometer inlet(qc_T_Neph_Inlet_Dry)
• Impactor setting in terms of aerodynamic diameter cut off(impactor_setting)
• Relative humidity, reference nephelometer(RH_Neph_Dry)
• Aerosol back-hemispheric light scattering coefficient, nominal blue wavelength
  at dry or reference RH(Bbs_B_Dry_Neph3W_1)
• Aerosol total light scattering coefficient, nominal red wavelength at dry or
  reference RH(Bs_R_Dry_Neph3W_1)
• Pressure inside reference nephelometer(P_Neph_Dry)
• Quality check results on field: Relative humidity at reference nephelometer
  inlet(qc_RH_Neph_Inlet_Dry)
• Quality check results on field: Impactor particle size cut(qc_impactor_state)
• Aerosol total light scattering coefficient, nominal blue wavelength at dry or
  reference RH(Bs_B_Dry_Neph3W_1)
• lon(lon)
• Quality check results on field: Aerosol total light scattering coefficient,
  nominal green wavelength at dry or reference RH(qc_Bs_G_Dry_Neph3W)
• Aerosol back-hemispheric light scattering coefficient, nominal red wavelength at
  dry or reference RH(Bbs_R_Dry_Neph3W)
• Aerosol total light scattering coefficient, nominal green wavelength at dry or
  reference RH(Bs_G_Dry_Neph3W_1)
• Dilution correction factor(dilution_correction_factor)
• Aerosol back-hemispheric light scattering coefficient, nominal blue wavelength
  at dry or reference RH(Bbs_B_Dry_Neph3W)
• seconds since last impactor transition(seconds_after_transition)
• Aerosol back-hemispheric light scattering coefficient, nominal green wavelength
  at dry or reference RH(Bbs_G_Dry_Neph3W_1)
• Time range for the hourly averages, in time offset from midnight(time_bounds)
• Relative humidity at reference nephelometer inlet(RH_Neph_Inlet_Dry)
• Quality check results on field: Relative humidity inside reference nephelometer(qc_RH_Neph_Dry)
• Sample temperature inside reference nephelometer(T_Neph_Dry)
• base time in epoch(base_time)
• Aerosol total light scattering coefficient, nominal green wavelength at dry or
  reference RH(Bs_G_Dry_Neph3W)
• Quality check results on field: Aerosol back-hemispheric light scattering
  coefficient, nominal green wavelength at dry or reference RH(qc_Bbs_G_Dry_Neph3W)
• Quality check results on field: Aerosol back-hemispheric light scattering
  coefficient, nominal blue wavelength at dry or reference RH(qc_Bbs_B_Dry_Neph3W)
• Correction to humidified nephelometer measurements to standard temperature and
  pressure(density_correction_factor)
• Quality check results on field: Aerosol back-hemispheric light scattering
  coefficient, nominal red wavelength at dry or reference RH(qc_Bbs_R_Dry_Neph3W)
• North Latitude(lat)
• Aerosol total light scattering coefficient, nominal red wavelength at dry or
  reference RH(Bs_R_Dry_Neph3W)
• Quality check results on field: Sample temperature inside reference nephelometer(qc_T_Neph_Dry)
• Aerosol back-hemispheric light scattering coefficient, nominal green wavelength
  at dry or reference RH(Bbs_G_Dry_Neph3W)
• -180.0 - +180.0(alt)
• Temperature, reference nephelometer inlet(T_Neph_Inlet_Dry)
• Quality check results on field: Aerosol total light scattering coefficient,
  nominal red wavelength at dry or reference RH(qc_Bs_R_Dry_Neph3W)
• Time offset from base_time(time_offset)
• Aerosol total light scattering coefficient, nominal blue wavelength at dry or
  reference RH(Bs_B_Dry_Neph3W)

• Mass flow(mass_flow)
• seconds since last impactor transition(seconds_after_transition)
• Transmittance, red channel(transmittance_red)
• AOS PSAP3W transmittance, green channel(transmittance_G)
• Time offset from base_time(time_offset)
• Aerosol light absorption coefficient, nominal green wavelength at dry or
  reference RH(Ba_G_PSAP3W)
• lon(lon)
• Flow setpoint(dilution_flow_setpoint)
• Impactor setting in terms of aerodynamic diameter cut off(impactor_setting)
• AOS Ba_R_CLAP3W transmittance, red channel(transmittance_R)
• Aerosol light absorption coefficient, nominal red wavelength at dry or reference
  RH(Ba_R_PSAP3W)
• Quality check results on field: Transmittance, blue channel(qc_transmittance_blue)
• Spot size area(spot_size_area)
• Quality check results on field: Transmittance, green channel(qc_transmittance_green)
• Aerosol light absorption coefficient, nominal blue wavelength at dry or
  reference RH(Ba_B_PSAP3W)
• Light absorbance, red channel(absorbance_red)
• Instrument flow rate(sample_flow_rate)
• AOS Ba_B_CLAP3W transmittance, blue channel(transmittance_B)
• Impactor state in terms of aerodynamic diameter cut off(impactor_state)
• time_in_seconds_since_volume_start(time)
• Time range for the hourly averages, in time offset from midnight(time_bounds)
• Quality check results on field: Transmittance, red channel(qc_transmittance_red)
• Dilution correction factor(dilution_correction_factor)
• base time in epoch(base_time)
• Light absorbance, green channel(absorbance_green)
• Filter ID, increments for each new filter(filter_id)
• Transmittance, blue channel(transmittance_blue)
• Quality check results on field: Impactor particle size cut(qc_impactor_state)
• Quality check results on field: AOS PSAP3W mass flow corrected for dilution(qc_sample_flow_rate)
• Dilution flow rate(dilution_flow)
• North Latitude(lat)
• Transmittance, green channel(transmittance_green)
• Light absorbance, blue channel(absorbance_blue)
• -180.0 - +180.0(alt)
• Diffusion flow valve position(dilution_flow_valve_position)