ENA/AOSMET/OZONE/TRACEGAS/C1 - missing data

The Unit 1 computer was found stuck in boot screen and had to be powered off to reboot.  
Data is missing for this period.

• Nitrous oxide (N2O) mixing ratio corrected for water vapor concentration and
  calculated with nominal sensitivity correction(n2o_dry)
• Actual mass flow through mass flow controller 1(mass_flow_through_MFC_1)
• Actual mass flow through MFC #2(mass_flow_through_MFC_2)
• Cell sample pressure(gas_pressure)
• base time in epoch(base_time)
• time_in_seconds_since_volume_start(time)
• Measured water content(h2o)
• Valve position mass flow controller 2(valve_position_MFC_2)
• Valve position for mass flow controller 1(valve_position_MFC_1)
• Ambient temperature of instrument(ambient_temperature)
• Set point for mass flow controller 2(set_point_for_MFC_2)
• Set point for Mass Flow Controller #1(set_point_for_MFC_1)
• Cell sample temperature(gas_temperature)
• -180.0 - +180.0(alt)
• North Latitude(lat)
• Time offset from base_time(time_offset)
• Carbon monoxide concentration(co)
• Nitrous oxide (N2O) mixing ratio calculated with nominal sensitivity correction(n2o)
• lon(lon)
• Carbon monoxide (CO) mixing ratio corrected for water vapor concentration and
  calculated with nominal sensitivity correction(co_dry)

• Supply voltage(supply_volts)
• Time offset from base_time(time_offset)
• Ambient air temperature(T_Ambient)
• Rain amount(rain_amount)
• Pressure of ambient air(P_Ambient)
• Heater voltage(heater_volts)
• Reference voltage(ref_volts)
• Rain duration(rain_duration)
• Wind Direction, relative to true North(WindDirection)
• Heater temperature(heater_temp)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• Wind speed(WindSpeed)
• lon(lon)
• Rain intensity(rain_intensity)
• base time in epoch(base_time)
• time_in_seconds_since_volume_start(time)
• Ambient air relative humidity(RH_Ambient)

• Time offset from base_time(time_offset)
• Ozone pressure(ozone_pressure)
• base time in epoch(base_time)
• lon(lon)
• North Latitude(lat)
• Ozone concentration(ozone)
• -180.0 - +180.0(alt)
• Ozone bench temperature(ozone_bench_temp)
• time_in_seconds_since_volume_start(time)

• Ambient temperature of instrument(ambient_temperature)
• Time offset from base_time(time_offset)
• lon(lon)
• Carbon monoxide (CO) mixing ratio corrected for water vapor concentration and
  calculated with nominal sensitivity correction(co_dry)
• time_in_seconds_since_volume_start(time)
• Nitrous oxide (N2O) mixing ratio calculated with nominal sensitivity correction(n2o)
• North Latitude(lat)
• Nitrous oxide (N2O) mixing ratio corrected for water vapor concentration and
  calculated with nominal sensitivity correction(n2o_dry)
• Cell sample temperature(gas_temperature)
• Cell sample pressure(gas_pressure)
• Set point for Mass Flow Controller #1(set_point_for_MFC_1)
• Set point for mass flow controller 2(set_point_for_MFC_2)
• -180.0 - +180.0(alt)
• Measured water content(h2o)
• Valve position mass flow controller 2(valve_position_MFC_2)
• Valve position for mass flow controller 1(valve_position_MFC_1)
• Actual mass flow through MFC #2(mass_flow_through_MFC_2)
• base time in epoch(base_time)
• Actual mass flow through mass flow controller 1(mass_flow_through_MFC_1)
• Carbon monoxide concentration(co)

• (Raw data stream - documentation not supported)

• (Raw data stream - documentation not supported)

• time_in_seconds_since_volume_start(time)
• Time offset from base_time(time_offset)
• lon(lon)
• Ozone concentration(ozone)
• base time in epoch(base_time)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• Ozone bench temperature(ozone_bench_temp)
• Ozone pressure(ozone_pressure)

• lon(lon)
• Cell sample temperature(gas_temperature)
• Nitrous oxide (N2O) mixing ratio calculated with nominal sensitivity correction(n2o)
• Quality check results on field: Water vapor mixing ratio calculated with nominal
  sensitivity correction(qc_h2o)
• Quality check results on field: Nitrous oxide (N2O) mixing ratio corrected for
  water vapor concentration and calculated with nominal sensitivity correction(qc_n2o_dry)
• Quality check results on field: Carbon monoxide (CO) mixing ratio calculated
  with nominal sensitivity correction(qc_co)
• Quality check results on field: Nitrous oxide concentration(qc_n2o)
• Seconds after last calibration(seconds_after_calibration)
• Carbon monoxide concentration(co)
• Valve position mass flow controller 2(valve_position_MFC_2)
• Valve position for mass flow controller 1(valve_position_MFC_1)
• Ambient temperature of instrument(ambient_temperature)
• time_in_seconds_since_volume_start(time)
• Cell sample pressure(gas_pressure)
• Carbon monoxide (CO) mixing ratio corrected for water vapor concentration and
  calculated with nominal sensitivity correction(co_dry)
• Measured water content(h2o)
• Time offset from base_time(time_offset)
• Set point for mass flow controller 2(set_point_for_MFC_2)
• Set point for Mass Flow Controller #1(set_point_for_MFC_1)
• Quality check results on field: Carbon monoxide (CO) mixing ratio corrected for
  water vapor concentration and calculated with nominal sensitivity correction(qc_co_dry)
• Nitrous oxide (N2O) mixing ratio corrected for water vapor concentration and
  calculated with nominal sensitivity correction(n2o_dry)
• North Latitude(lat)
• base time in epoch(base_time)
• Actual mass flow through mass flow controller 1(mass_flow_through_MFC_1)
• Actual mass flow through MFC #2(mass_flow_through_MFC_2)
• -180.0 - +180.0(alt)

• (Raw data stream - documentation not supported)

• Time offset from base_time(time_offset)
• Rain intensity(rain_intensity)
• Ambient air temperature(T_Ambient)
• Rain amount(rain_amount)
• Ambient air relative humidity(RH_Ambient)
• base time in epoch(base_time)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• Heater temperature(heater_temp)
• Wind speed(WindSpeed)
• Supply voltage(supply_volts)
• time_in_seconds_since_volume_start(time)
• lon(lon)
• Reference voltage(ref_volts)
• Rain duration(rain_duration)
• Heater voltage(heater_volts)
• Wind Direction, relative to true North(WindDirection)
• Pressure of ambient air(P_Ambient)