SGP/EBBR/E4 - 3-month check

During EBBR 3-month checks the Automatic Exchange Mechanism is disabled 
(reflected by home signals near zero) so that the two aspirator units can be 
placed at the same height.  The measurements during this period, at least, 
do not produce correct outputs of bowen ratio (bowen), sensible heat flux (h), 
or latent heat flux (e), nor do the air temperature and relative humidity 
measurements indicate gradients.  Checks performed before or after the AEM 
is disabled also lead to some incorrect data.  The period of incorrect 
data for the EBBR is listed above; data times affected do not include the 
beginning time and do include the ending time (data files are denoted by 
the end time).

• Top air temperature(temp_air_top)
• Top relative humidity (fractional)(rh_top_fraction)
• Bottom air temperature(temp_air_bottom)
• Surface latent heat flux(latent_heat_flux)
• Top vapor pressure(vapor_pressure_top)
• Bottom vapor pressure(vapor_pressure_bottom)
• Bottom T/RH sensor temperature(temp_trh_bottom)
• Bottom relative humidity (fractional)(rh_bottom_fraction)
• Top T/RH sensor temperature(temp_trh_top)
• Bowen ratio(bowen_ratio)
• Surface sensible heat flux(sensible_heat_flux)

• Bottom air temperature(temp_air_bottom)
• Top relative humidity (fractional)(rh_top_fraction)
• Top T/RH sensor temperature(temp_trh_top)
• Bottom vapor pressure(vapor_pressure_bottom)
• Bottom T/RH sensor temperature(temp_trh_bottom)
• Top vapor pressure(vapor_pressure_top)
• Bottom relative humidity (fractional)(rh_bottom_fraction)
• Top air temperature(temp_air_top)