DataStreams: | sgpaerilbldiffssC1.c1, sgpaerich2C1.a2, sgpaeriprofC1.c1, sgpaeri01ch2C1.a1, sgpqmeaeriprofC1.c1, sgpaerisummaryC1.a1, sgpaerisummaryC1.a2, sgpaerilbldiffC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerilblC1.c1, sgpqmeaerimeansC1.c1, sgpaerilblcloudsC1.c1, sgpaeri01summaryC1.a1, sgpaerich1C1.a1, sgpaeri01ch1C1.a1, sgpaerich2C1.a1, sgpaerich1C1.a2, sgpaerilbldifflsC1.c1, sgpaeriC1.00, sgpqmeaerimeansssC1.c1, sgpqmeaerilblssC1.c1, sgpaeri01engineerC1.a1
|
Measurements: | sgpaerilbldiffssC1.c1: - base time in epoch(base_time)
- Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
that are not saturated(integ_resid_ch_unsat) - lon(lon)
- Average of brightness temperatures calculated from AERI radiances within
spectral windows, ch1:[1142.20,1147.03] & ch2:[2506.20,2511.02](mean_AERI_BT) - Time offset from base_time(time_offset)
- AERI sample time minus Sonde release time (validation time)(sonde_offset_time)
- AERI radiance spectra minus LBLRTM radiance spectra(rad_difference)
- MFRSR channels(channel)
- Logical flag indicating if the AERI sample was used to derive the surface
temperature value for driving the model(surface_temp_from_aeri_used) - -180.0 - +180.0(alt)
- North Latitude(lat)
- Indicator of large residuals in channel 1 transparent region(transparent_region_dq_flag)
- Wavenumber for a given sample time(wavenumber)
more
sgpqmeaeriprofC1.c1: - Time offset from base_time(time_offset)
- Integrated vapor column from the retrieved profiles(integ_vap_retrieval)
- Root mean square error from the temperature residual profile(temperature_RMSE)
- Flag indicating where the initial surface water measurements are from: 0-> SMOS,
1-> AERI(water_flag) - Cloud base height used during retrieval(cloudBaseHeight)
- Dewpoint temperature residual at 25 meters: vertically interpolated retrieved
value - 25 meter tower value(dewpoint_25m_resid) - Maximum height of the sonde(sonde_max_height)
- Temperature residual at 60 meters: vertically interpolated retrieved value - 60
meter tower value(temperature_60m_resid) - base time in epoch(base_time)
- Residual mixing ratio profile: retrieved - sonde(mixing_ratio_resid)
- Residual temperature profile: retrieved - sonde(temperature_resid)
- Integrated vapor from the entire sonde profile(integ_vap_entire_sonde)
- Mixing ratio calculated from the 25 meter tower inputs(mixing_ratio_25m_tower)
- Height(height)
- AERI sample time minus Sonde release time (validation time)(sonde_offset_time)
- Mixing ratio residual at 25 meters: vertically interpolated retrieved value - 25
meter tower value(mixing_ratio_25m_resid) - Integrated vapor from the sonde profiles, which have been averaged to the static
field `height`(integ_vap_partial_sonde) - lon(lon)
- Temperature residual at 25 meters: vertically interpolated retrieved value - 25
meter tower value(temperature_25m_resid) - Mixing ratio calculated from the 60 meter tower inputs(mixing_ratio_60m_tower)
- Mixing ratio residual at 60 meters: vertically interpolated retrieved value - 60
meter tower value(mixing_ratio_60m_resid) - Residual dewpoint temperature profile: retrieved - sonde(dewpoint_resid)
- Root mean square error from the mixing ratio residual profile(mixing_ratio_RMSE)
- Root mean square error from the dewpoint temperature residual profile(dewpoint_RMSE)
- Time offset between retrieval and 60 meter tower samples: retrieval time - tower
time(time_offset_60m_tower) - Time offset between retrieval and 25 meter tower samples: retrieval time - tower
time(time_offset_25m_tower) - -180.0 - +180.0(alt)
- North Latitude(lat)
- Sonde serial number(sonde_serial_number)
- Dewpoint temperature residual at 60 meters: vertically interpolated retrieved
value - 60 meter tower value(dewpoint_60m_resid) - Total precipitable water vapor, from Microwave Radiometer(totalPrecipitalWater)
more
sgpqmeaerimeansssC1.c1: - Number of wavenumbers for which the calculations are performed(nobs_rad_ch_pro)
- Standard deviation of mean_hour_rad about mean_rad for wavenumbers between
550.1299 and 3020.1699(sdev_rad_all) - Number of wavenumbers for which the calculations are performed(nobs_rad_pro)
- The average of mean_hour_rad computed over the wavenumbers for each of the AERI
channels(mean_rad_ch) - The standard deviation of the AERI spectral radiances about the hourly averaged
mean(sdev_hour_rad) - The standard deviation of mean_hour_rad about mean_rad_pro for the set of
wavenumbers which are mapped to a particular physical process(sdev_rad_pro) - Time offset from base_time(time_offset)
- Number of wavenumbers for which the calculations are performed(nobs_rad_bin_pro)
- The standard deviation of mean_hour_rad about mean_rad_ch computed over the
wavenumbers for each of the AERI channels(sdev_rad_ch) - Average of mean_hour_rad for wavenumbers within each bin(mean_rad_bin)
- The standard deviation of mean_hour_rad about mean_rad_bin_pro for the set of
wavenumbers within a particular bin for a fixed physical process(sdev_rad_bin_pro) - Number of wavenumbers for which the calculations are performed(nobs_rad_bin)
- Average of mean_hour_rad computed for wavenumbers within each channel and
physical process category(mean_rad_ch_pro) - For each channel, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_ch) - Standard deviation of mean_hour_rad about mean_rad_bin for wavenumbers within
each bin(sdev_rad_bin) - For each channel, this gives the total number of active physical processes out
of the 12 defined for the process field(NOTE 0-indeterminate is counted)(nactive_pro_ch) - North Latitude(lat)
- -180.0 - +180.0(alt)
- Average of mean_hour_rad for wavenumbers within each physical process category(mean_rad_pro)
- For each bin, this gives the total number of active physical processes out of
the 12 defined for the process field (NOTE 0-indeterminate is counted)(nactive_pro_bin) - Number of wavenumbers for which the calculations are performed(nobs_rad_ch)
- Standard deviation of mean_hour_rad about mean_rad_ch_pro for wavenumbers within
each channel and physical process category that are not saturated(sdev_rad_ch_pro) - wavenumbers for hourly averaged spectral radiances(wavenum)
- Average of mean_hour_rad for wavenumbers between 550.1299 and 3020.1699(mean_rad_all)
- MFRSR channels(channel)
- Number of wavenumber elements over which the calculations are performed(nobs_rad_all)
- The AERI spectral radiances averaged over an hour window centered on the time of
the LBLRTM rundeck(mean_hour_rad) - Average of mean_hour_rad for wavenumbers within each bin and physical process
category(mean_rad_bin_pro) - base time in epoch(base_time)
- Physical process number used as a coordinate in the process dimension(process)
- lon(lon)
- Bin numbers for sweep measurements(bin)
- The number of spectra over which the hourly calculations are performed(nobs_hour_rad)
- For each bin, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_bin) more
sgpqmeaerilbllsC1.c1: - Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each channel that are not saturated(mean_abs_resid_ch_unsat) - Integral of the radiances over wavenumbers within each physical process category
where the Planck function is used for saturated wavenumbers and AERI measured radiance(integ_rad_pro_all) - Mean Vapor Pressure from SMOS(SMOS_vap_pres)
- AERI sample time minus SMOS sample time(SMOS_offset_time)
- Integral of the radiances over wavenumbers within each channel and physical
process category where the Planck function is used for saturated wavenumbers and AERI me(integ_rad_ch_pro_all) - Integral of the radiances over wavenumbers within each bin and physical process
category where the Planck function is used for saturated wavenumbers and AERI measu(integ_rad_bin_pro_all) - Number of wavenumbers over which the mean or integral is calculated(nobs_bin_pro_unsat)
- Number of wavenumbers over which the mean or integral is calculated(nobs_unsat)
- Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each bin and physical process category that are not saturated(mean_abs_resid_bin_pro_unsat) - MFRSR channels(channel)
- Integral of the AERI minus LBLRTM residuals for wavenumbers within each bin and
physical process category that are not saturated(integ_resid_bin_pro_unsat) - Surface temps used in the LBLRTM runs Univ of WISC selected bands(model_surfT)
- Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each bin that are not saturated(integ_abs_resid_bin_unsat) - Integral of the AERI minus LBLRTM residuals for wavenumbers between 550.1299 and
3020.1699 that are not saturated(integ_resid_unsat) - Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each physical process category that are not saturated(integ_abs_resid_pro_unsat) - Integral of the Planck blackbody radiances using model_surfT over wavenumbers
between 550.1299 and 3020.1699 that are saturated(integ_rad_sat) - Mean of the AERI minus LBLRTM residuals for wavenumbers within each physical
process category that are not saturated(mean_resid_pro_unsat) - Integral of the AERI measured radiances over wavenumbers within each channel
that are not saturated(integ_rad_ch_unsat) - Number of wavenumbers over which the integral is calculated(nobs_all)
- For each bin, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_bin) - For each channel, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_ch) - lon(lon)
- Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each bin and physical process category that are not saturated(integ_abs_resid_bin_pro_unsat) - Number of wavenumbers values over which the integral is calculated(nobs_ch_sat)
- Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each channel and physical process category that are not saturated(integ_rad_ch_pro_sat) - Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each bin and physical process category that are saturated(integ_rad_bin_pro_sat) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each channel that are not saturated(sdev_resid_ch_unsat) - Precipitation Total from SMOS(SMOS_precip)
- Standard Deviation of Relative Humidity from SMOS(SMOS_sd_rh)
- Standard deviation of the average radiances in the 985-990 and 2510-2515
wavenumber windows during the AERI dwell time(aeri_dwell_atm_var) - Average of brightness temperatures calculated from AERI radiances within
spectral windows, ch1:[1142.20,1147.03] & ch2:[2506.20,2511.02](mean_AERI_BT) - Mean Temperature from SMOS(SMOS_temp)
- Number of wavenumbers over which the mean or integral is calculated(nobs_bin_unsat)
- Number of wavenumbers over which the mean or integral is calculated(nobs_ch_unsat)
- Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each channel and physical process category that are not saturated(mean_abs_resid_ch_pro_unsat) - Logical flag indicating if the AERI sample was used to derive the surface
temperature value for driving the model(surface_temp_from_aeri_used) - AERI sample time minus Sonde release time (validation time)(sonde_offset_time)
- Number of wavenumbers over which the integral is calculated(nobs_bin_pro_all)
- Measure of atmospheric variability over 705-798 cm-1 (bin 3)(meas_atm_var_bin3)
- Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each channel that are not saturated(integ_abs_resid_ch_unsat) - Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each bin that are not saturated(mean_abs_resid_bin_unsat) - Integral of the radiances over wavenumbers within each bin where the Planck
function is used for saturated wavenumbers and AERI measured radiance is used otherwise(integ_rad_bin_all) - Mean of the AERI minus LBLRTM residuals for wavenumbers within each bin that are
not saturated(mean_resid_bin_unsat) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each bin and physical process category that are not saturated(sdev_resid_bin_pro_unsat) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each channel and physical process category that are not saturated(sdev_resid_ch_pro_unsat) - Integral of the radiances over wavenumbers between 550.1299 and 3020.1699 where
the Planck function is used for saturated wavenumbers and AERI measured radiance is used ot(integ_rad_all) - -180.0 - +180.0(alt)
- Integral of the AERI minus LBLRTM residuals for wavenumbers within each physical
process category that are not saturated(integ_resid_pro_unsat) - North Latitude(lat)
- Number of wavenumbers over which the integral is calculated(nobs_ch_all)
- Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each physical process category that are not saturated(mean_abs_resid_pro_unsat) - First temperature reported by the sonde(sonde_surfT)
- Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
that are not saturated(integ_resid_ch_unsat) - Number of wavenumbers over which the integral is calculated(nobs_pro_all)
- Number of wavenumbers over which the mean or integral is calculated(nobs_pro_unsat)
- Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each bin that are saturated(integ_rad_bin_sat) - Integral of the AERI measured radiances over wavenumbers within each bin and
physical process category that are not saturated(integ_rad_bin_pro_unsat) - For each bin, this gives the total number of active physical processes out of
the 12 defined for the process field (NOTE 0-indeterminate is counted)(nactive_pro_bin) - Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each channel that are saturated(integ_rad_ch_sat) - Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
between 550.1299 and 3020.1699 that are not saturated(mean_abs_resid_unsat) - Integral of the AERI measured radiances over wavenumbers within each channel and
physical process category that are not saturated(integ_rad_ch_pro_unsat) - Integral of the AERI measured radiances over wavenumbers within each bin that
are not saturated(integ_rad_bin_unsat) - Mean of the AERI minus LBLRTM residuals for wavenumbers within each bin and
physical process category that are not saturated(mean_resid_bin_pro_unsat) - Integral of the AERI minus LBLRTM residuals for wavenumbers within each bin that
are not saturated(integ_resid_bin_unsat) - Mean of the AERI minus LBLRTM residuals for wavenumbers within each channel that
are not saturated(mean_resid_ch_unsat) - Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers between 550.1299 and 3020.1699 that are not saturated(integ_abs_resid_unsat) - Number of wavenumbers over which the integral is calculated(nobs_bin_all)
- For each channel, this gives the total number of active physical processes out
of the 12 defined for the process field(NOTE 0-indeterminate is counted)(nactive_pro_ch) - Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each physical process category that are saturated(integ_rad_pro_sat) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each physical process category that are not saturated(sdev_resid_pro_unsat) - Number of wavenumbers values over which the integral is calculated(nobs_ch_pro_sat)
- Standard Deviation of Vapor Pressure from SMOS(SMOS_sd_vap_pres)
- Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers between 550.1299 and 3020.1699 that are not saturated(sdev_resid_unsat) - Standard Deviation of Temperature from SMOS(SMOS_sd_temp)
- Mean Barometeric Pressure from SMOS(SMOS_bar_pres)
- Integral of the AERI measured radiances over wavenumbers between 550.1299 and
3020.1699 that are not saturated(integ_rad_unsat) - Standard Deviation of Barometric Pressure from SMOS(SMOS_sd_bar_pres)
- Number of wavenumbers values over which the integral is calculated(nobs_pro_sat)
- Number of wavenumbers over which the mean or integral is calculated(nobs_ch_pro_unsat)
- Mean of the AERI minus LBLRTM residuals for wavenumbers between 550.1299 and
3020.1699 that are not saturated(mean_resid_unsat) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each bin that are not saturated(sdev_resid_bin_unsat) - Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
and physical process category that are not saturated(integ_resid_ch_pro_unsat) - base time in epoch(base_time)
- Integral of the radiances over wavenumbers within each channel where the Planck
function is used for saturated wavenumbers and AERI measured radiance is used otherwise(integ_rad_ch_all) - Integral of the AERI measured radiances over wavenumbers within each physical
process category that are not saturated(integ_rad_pro_unsat) - Time offset from base_time(time_offset)
- Mean Relative Humidity from SMOS(SMOS_rh)
- Indicator of large residuals in channel 1 transparent region(transparent_region_dq_flag)
- Number of wavenumbers values over which the integral is calculated(nobs_bin_pro_sat)
- Bin numbers for sweep measurements(bin)
- Mean of the AERI minus LBLRTM residuals for wavenumbers within each channel and
physical process category that are not saturated(mean_resid_ch_pro_unsat) - Number of wavenumbers over which the integral is calculated(nobs_ch_pro_all)
- Number of wavenumbers values over which the integral is calculated(nobs_bin_sat)
- Difference of brightness temperatures in the ch1 window region, [1142.20,
1147.03] wavenumbers, which is an indicator of the atmospheric variability(meas_atm_var_T1) - Number of wavenumbers values over which the integral is calculated(nobs_sat)
- Physical process number used as a coordinate in the process dimension(process)
- Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each channel and physical process category that are not saturated(integ_abs_resid_ch_pro_unsat) more
sgpaerich1C1.a1: - -180.0 - +180.0(alt)
- Bomem Time(timeBomemHHMM)
- North Latitude(lat)
- Derived pressure(pressure)
- Mean of radiance spectra ensemble(mean_rad)
- Initial data quality flag(dataType)
- Time offset from base_time(time_offset)
- Thermistor input channel number 6 (counting from 0) equivalent temperature(thermistor6)
- Thermistor input channel number 7 (counting from 0) equivalent temperature(thermistor7)
- Electronics Air(thermistor8)
- Thermistor input channel number 9 (counting from 0) equivalent temperature(thermistor9)
- Reflected Temperature(thermistor2)
- Thermistor input channel number 3 (counting from 0) equivalent temperature(thermistor3)
- Thermistor input channel number 4 (counting from 0) equivalent temperature(thermistor4)
- ABB #1(thermistor5)
- Ambient Air near BBs(thermistor0)
- Thermistor input channel number 1 (counting from 0) equivalent temperature(thermistor1)
- Cold Blackbody Temperature(coldBBTemp)
- Original Record Number in CVI or RVI file(originalRecordNumber)
- Reflected Temperature(reflectedTemp)
- Hatch Closed Indicator(thermistor10)
- Thermistor input channel number 11 (counting from 0) equivalent temperature(thermistor11)
- Thermistor input channel number 12 (counting from 0) equivalent temperature(thermistor12)
- Spare #2(thermistor13)
- Relative Humidity(humidity_relative)
- Hot Blackbody Temperature(hotBBTemp)
- Wave number in reciprocal centimeters(wnum2)
- wavenumbers for mean radiance spectra(wnum)
- lon(lon)
- Difference between the sky view\'s radiance variance and the hot black body
view\'s variance(standard_dev_mean_rad) - Time at center of AERI sky observation period(timeHHMMSS)
- base time in epoch(base_time)
more
sgpaerich1C1.a2: - -180.0 - +180.0(alt)
- North Latitude(lat)
- Time offset from base_time(time_offset)
- Bomem Time(timeBomemHHMM)
- Relative Humidity(humidity_relative)
- Difference between the sky view\'s radiance variance and the hot black body
view\'s variance(standard_dev_mean_rad) - Initial data quality flag(dataType)
- Original Record Number in CVI or RVI file(originalRecordNumber)
- Thermistor input channel number 9 (counting from 0) equivalent temperature(thermistor9)
- Electronics Air(thermistor8)
- Thermistor input channel number 7 (counting from 0) equivalent temperature(thermistor7)
- Thermistor input channel number 6 (counting from 0) equivalent temperature(thermistor6)
- ABB #1(thermistor5)
- Thermistor input channel number 4 (counting from 0) equivalent temperature(thermistor4)
- Thermistor input channel number 3 (counting from 0) equivalent temperature(thermistor3)
- Reflected Temperature(thermistor2)
- Thermistor input channel number 1 (counting from 0) equivalent temperature(thermistor1)
- Ambient Air near BBs(thermistor0)
- Derived pressure(pressure)
- Thermistor input channel number 11 (counting from 0) equivalent temperature(thermistor11)
- Hatch Closed Indicator(thermistor10)
- Spare #2(thermistor13)
- Thermistor input channel number 12 (counting from 0) equivalent temperature(thermistor12)
- wavenumbers for mean radiance spectra(wnum)
- Reflected Temperature(reflectedTemp)
- Hot Blackbody Temperature(hotBBTemp)
- Cold Blackbody Temperature(coldBBTemp)
- Time at center of AERI sky observation period(timeHHMMSS)
- Wave number in reciprocal centimeters(wnum2)
- base time in epoch(base_time)
- lon(lon)
- Mean of radiance spectra ensemble(mean_rad)
more
sgpaerilbldiffC1.c1: - Logical flag indicating if the AERI sample was used to derive the surface
temperature value for driving the model(surface_temp_from_aeri_used) - base time in epoch(base_time)
- AERI radiance spectra minus LBLRTM radiance spectra(rad_difference)
- Wavenumber for a given sample time(wavenumber)
- Average of brightness temperatures calculated from AERI radiances within
spectral windows, ch1:[1142.20,1147.03] & ch2:[2506.20,2511.02](mean_AERI_BT) - MFRSR channels(channel)
- AERI sample time minus Sonde release time (validation time)(sonde_offset_time)
- Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
that are not saturated(integ_resid_ch_unsat) - lon(lon)
- Indicator of large residuals in channel 1 transparent region(transparent_region_dq_flag)
- Time offset from base_time(time_offset)
- -180.0 - +180.0(alt)
- North Latitude(lat)
more
sgpaeri01ch2C1.a1: - Hot blackbody temperature - apex(HBBapexTemp)
- Hot blackbody temperature used in calibration(calibrationHBBtemp)
- lon(lon)
- Blackbody controller unit 1 power supply temperature(BBcontroller1temp)
- Ambient temperature used in calibration(calibrationAmbientTemp)
- Time at center of AERI sky observation period(Time)
- Ingest computer temperature(computerTemp)
- Ambient blackbody temperature - rim top(ABBtopTemp)
- Blackbody controller unit 2 power supply temperature(BBcontroller2temp)
- Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
- AERI interferometer temperature at second port(interferometerSecondPortTemp)
- Scene mirror motor case temperature(mirrorMotorTemp)
- Ambient blackbody temperature - apex(ABBapexTemp)
- Hot blackbody temperature - rim bottom(HBBbottomTemp)
- AERI instrument hatch indicator (open, closed, neither)(hatchIndicator)
- Ambient blackbody temperature(ABBbottomTemp)
- Cold blackbody temperature used in calibration(calibrationCBBtemp)
- Time at end of interferometer data collection(rawTimeHHMMSS)
- base time in epoch(base_time)
- Observation atmospheric pressure in AERI electronics(atmosphericPressure)
- Resistive temperature of 2500 ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
- Scene mirror motor driver heat sink temperature(motorDriverTemp)
- Time offset from base_time(time_offset)
- Stirling cycle cooler expander temperature(coolerExpanderTemp)
- Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
- Scene mirror position encoder value(sceneMirPosEncoder)
- Relative humidity measured near Blackbodies. Use with air temperature near BBs
only.(atmosphericRelativeHumidity) - Electronics rack ambient temperature(rackAmbientTemp)
- BB Support Structure Temperature(BBsupportStructureTemp)
- Ambient air temperature near blackbodies(airNearBBsTemp)
- Ambient air temperature at hatch opening(outsideAirTemp)
- Julian Day including day and fraction of day(JulianDay)
- Stirling cycle cooler current(coolerCurrent)
- Wave number in reciprocal centimeters(wnum2)
- Mean of radiance spectra ensemble(mean_rad)
- wavenumbers for mean radiance spectra(wnum)
- Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
- Hot blackbody temperature - rim top(HBBtopTemp)
- Detector Temperature(detectorTemp)
- Difference between the sky view\'s radiance variance and the hot black body
view\'s variance(standard_dev_mean_rad) - North Latitude(lat)
- -180.0 - +180.0(alt)
- Time at center of AERI sky observation period(timeHHMMSS)
- Signal conditioning electronics inside air temperature(SCEtemp)
- Spare temperature sensor (location TBD)(spareTemp)
- Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
- Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
more
sgpaerilblcloudsC1.c1: - Standard deviation of the IR temperature ensemble(sdev_irt)
- Ensemble average of total water vapor along LOS path from the MWR(mean_vap)
- Number of cloudy observations in ensemble(nobs_cloud2_cbh)
- Cloud detection flag from sgpaerilblcloudsC1.c1(nonclear_flag)
- Number of cloudy observations in ensemble(nobs_cloud3_cbh)
- Number of foggy observations in ensemble (probably condensation on the window)(nobs_mpl_foggy)
- Standard deviation of 23tbsky ensemble(sdev_23tbsky_large)
- Number of clear observations in ensemble(nobs_cloud1_clear)
- North Latitude(lat)
- Calculated cloud cover fraction from the WSI(cloud_cover_frac)
- -180.0 - +180.0(alt)
- Number of cloudy observations in ensemble(nobs_mpl_cbh)
- Number of observations in each MWR ensemble (23tbsky, 31tbsky, vap, liq)(nobs_mwr_ensembles)
- Number of clear observations in ensemble(nobs_cloud2_clear)
- Number of observations in each `large` MWR ensemble (23tbsky and 31tbsky)(nobs_mwr_ensembles_large)
- Sonde serial number(sonde_serial_number)
- Average of brightness temperatures calculated from AERI radiances within
spectral window for channel 2: [2506.20,2511.02](mean_AERI_BT_channel_2) - Average of brightness temperatures calculated from AERI radiances within
spectral window for channel 1: [1142.20,1147.03](mean_AERI_BT_channel_1) - Ensemble average of 31.4 GHz sky brightness temperature from the MWR(mean_31tbsky)
- Cloud base height estimate from the field mean_AERI_BT_channel_1(cbh_AERI_channel_1)
- Ensemble average of ratios of direct_norm_broadband divided by
diffuse_hemisp_broadband from the SIROS(mean_dir_by_diff_ratio) - Cloud base height estimate from the field mean_AERI_BT_channel_2(cbh_AERI_channel_2)
- Ensemble average of first cloud base height from the Belfort ceilometer(mean_cloud1_cbh)
- Standard deviation of cloud1 ensemble(sdev_cloud1_cbh)
- Standard deviation of liq ensemble(sdev_liq)
- Standard deviation of mpl_cbh ensemble(sdev_mpl_cbh)
- Number of clear observations in ensemble(nobs_cloud3_clear)
- Standard deviation of ratio ensemble about mean_dir_to_diff_ratio(sdev_dir_by_diff_ratio)
- Data quality flag for MPL cbh ensemble(mpl_cbh_dq_flag)
- Standard deviation of cloud3 ensemble(sdev_cloud3_cbh)
- Standard deviation of cloud2 ensemble(sdev_cloud2_cbh)
- Number of ratios in ensemble(nobs_dir_by_diff_ratio)
- Standard deviation of 31tbsky ensemble(sdev_31tbsky_large)
- AERI sample time minus WSI image time(wsi_offset_time)
- Standard deviation of 31tbsky ensemble(sdev_31tbsky)
- base time in epoch(base_time)
- Cloud base height from the MPL(mean_mpl_cbh)
- Number of clear observations in ensemble(nobs_mpl_clear)
- Time offset from base_time(time_offset)
- Standard deviation of the average radiance in the 985-990 wavenumber window
during the AERI dwell time(aeri_dwell_atm_var_channel_1) - Standard deviation of the average radiance in the 2510-2515 wavenumber window
during the AERI dwell time(aeri_dwell_atm_var_channel_2) - Standard deviation of 23tbsky ensemble(sdev_23tbsky)
- Ensemble average of third cloud base height from the Ceilometer(mean_cloud3_cbh)
- Average total liquid water along LOS path from the MWR(mean_liq)
- Ensemble average of second cloud base height from the Belfort ceilometer(mean_cloud2_cbh)
- Ensemble average of 23.8 GHz sky brightness temperature from the MWR(mean_23tbsky)
- Calculated number of clouds in WSI image(num_cloud)
- Standard deviation of vap ensemble(sdev_vap)
- lon(lon)
- Binary field indicating which inputs are available and used to set the
nonclear_flag(nonclear_inputs) - Integrated vapor column from sonde using MWR Instrument Performance Model (IPM)(integ_vap_sonde)
- AERI sample time minus Sonde release time (validation time)(sonde_offset_time)
- IR temperature calculated from the AERI spectral response function used to
mimick the output from the IR thermometer on the MWR(calculated_irt) - Average IR temperature from the IRT (on the MWR)(mean_irt)
- Number of cloudy observations in ensemble(nobs_cloud1_cbh)
more
sgpqmeaerimeansC1.c1: - Number of wavenumber elements over which the calculations are performed(nobs_rad_all)
- Bin numbers for sweep measurements(bin)
- The number of spectra over which the hourly calculations are performed(nobs_hour_rad)
- Physical process number used as a coordinate in the process dimension(process)
- Time offset from base_time(time_offset)
- Average of mean_hour_rad computed for wavenumbers within each channel and
physical process category(mean_rad_ch_pro) - Average of mean_hour_rad for wavenumbers within each bin(mean_rad_bin)
- Number of wavenumbers for which the calculations are performed(nobs_rad_pro)
- MFRSR channels(channel)
- The average of mean_hour_rad computed over the wavenumbers for each of the AERI
channels(mean_rad_ch) - For each channel, this gives the total number of active physical processes out
of the 12 defined for the process field(NOTE 0-indeterminate is counted)(nactive_pro_ch) - The AERI spectral radiances averaged over an hour window centered on the time of
the LBLRTM rundeck(mean_hour_rad) - For each bin, this gives the total number of active physical processes out of
the 12 defined for the process field (NOTE 0-indeterminate is counted)(nactive_pro_bin) - Standard deviation of mean_hour_rad about mean_rad for wavenumbers between
550.1299 and 3020.1699(sdev_rad_all) - Standard deviation of mean_hour_rad about mean_rad_ch_pro for wavenumbers within
each channel and physical process category that are not saturated(sdev_rad_ch_pro) - For each bin, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_bin) - For each channel, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_ch) - Number of wavenumbers for which the calculations are performed(nobs_rad_ch)
- Number of wavenumbers for which the calculations are performed(nobs_rad_bin)
- Average of mean_hour_rad for wavenumbers within each bin and physical process
category(mean_rad_bin_pro) - wavenumbers for hourly averaged spectral radiances(wavenum)
- base time in epoch(base_time)
- -180.0 - +180.0(alt)
- North Latitude(lat)
- The standard deviation of mean_hour_rad about mean_rad_pro for the set of
wavenumbers which are mapped to a particular physical process(sdev_rad_pro) - Average of mean_hour_rad for wavenumbers between 550.1299 and 3020.1699(mean_rad_all)
- The standard deviation of mean_hour_rad about mean_rad_ch computed over the
wavenumbers for each of the AERI channels(sdev_rad_ch) - Standard deviation of mean_hour_rad about mean_rad_bin for wavenumbers within
each bin(sdev_rad_bin) - The standard deviation of mean_hour_rad about mean_rad_bin_pro for the set of
wavenumbers within a particular bin for a fixed physical process(sdev_rad_bin_pro) - Average of mean_hour_rad for wavenumbers within each physical process category(mean_rad_pro)
- Number of wavenumbers for which the calculations are performed(nobs_rad_bin_pro)
- Number of wavenumbers for which the calculations are performed(nobs_rad_ch_pro)
- lon(lon)
- The standard deviation of the AERI spectral radiances about the hourly averaged
mean(sdev_hour_rad) more
sgpaeri01engineerC1.a1: - Engineering channel 2 raw counts(engineeringChannel2counts)
- Standard deviation of AERI pressure in counts(countsStdDevPressure)
- Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
- Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
- Temperature standard deviation for thermistor channel 0(tempStdDevThermistor0)
- Temperature standard deviation for thermistor channel 1(tempStdDevThermistor1)
- Temperature standard deviation for thermistor channel 8(tempStdDevThermistor8)
- Temperature standard deviation for thermistor channel 9(tempStdDevThermistor9)
- Temperature standard deviation for thermistor channel 6(tempStdDevThermistor6)
- Temperature standard deviation for thermistor channel 7(tempStdDevThermistor7)
- Temperature standard deviation for thermistor channel 4(tempStdDevThermistor4)
- Temperature standard deviation for thermistor channel 5(tempStdDevThermistor5)
- Temperature standard deviation for thermistor channel 2(tempStdDevThermistor2)
- Temperature standard deviation for thermistor channel 3(tempStdDevThermistor3)
- Temperature standard deviation for thermistor channel 14(tempStdDevThermistor14)
- Temperature standard deviation for thermistor channel 13(tempStdDevThermistor13)
- Temperature standard deviation for thermistor channel 16(tempStdDevThermistor16)
- Temperature standard deviation for thermistor channel 15(tempStdDevThermistor15)
- Temperature standard deviation for thermistor channel 10(tempStdDevThermistor10)
- Temperature standard deviation for thermistor channel 12(tempStdDevThermistor12)
- Temperature standard deviation for thermistor channel 11(tempStdDevThermistor11)
- Thermistor input channel number 20 (counting from 0) equivalent temperature(thermistor20)
- Thermistor input channel number 21 (counting from 0) equivalent temperature(thermistor21)
- Thermistor input channel number 22 (counting from 0) equivalent temperature(thermistor22)
- Thermistor input channel number 23 (counting from 0) equivalent temperature(thermistor23)
- base time in epoch(base_time)
- Thermistor input channel number 15 (counting from 0) equivalent temperature(thermistor15)
- Thermistor input channel number 16 (counting from 0) equivalent temperature(thermistor16)
- Thermistor input channel number 17 (counting from 0) equivalent temperature(thermistor17)
- Thermistor input channel number 18 (counting from 0) equivalent temperature(thermistor18)
- Thermistor input channel number 19 (counting from 0) equivalent temperature(thermistor19)
- Hatch Closed Indicator(thermistor10)
- Thermistor input channel number 11 (counting from 0) equivalent temperature(thermistor11)
- Thermistor input channel number 12 (counting from 0) equivalent temperature(thermistor12)
- Spare #2(thermistor13)
- Thermistor input channel number 14 (counting from 0) equivalent temperature(thermistor14)
- Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
- Time at center of AERI sky observation period(timeHHMMSS)
- Engineering channel 1 data(engineeringChannel1data)
- Reflected Temperature(thermistor2)
- Thermistor input channel number 3 (counting from 0) equivalent temperature(thermistor3)
- Ambient Air near BBs(thermistor0)
- Thermistor input channel number 1 (counting from 0) equivalent temperature(thermistor1)
- Thermistor input channel number 6 (counting from 0) equivalent temperature(thermistor6)
- Thermistor input channel number 7 (counting from 0) equivalent temperature(thermistor7)
- Thermistor input channel number 4 (counting from 0) equivalent temperature(thermistor4)
- ABB #1(thermistor5)
- Electronics Air(thermistor8)
- Thermistor input channel number 9 (counting from 0) equivalent temperature(thermistor9)
- lon(lon)
- Engineering channel 0 data(engineeringChannel0data)
- Spare temperature sensor (location TBD)(spareTemp)
- Mirror position encoder value(rawMirrorPositionEncoder)
- Engineering channel 2 data(engineeringChannel2data)
- Relative humidity at site(rawAtmosphericRelativeHumidity)
- Barometric pressure at site(rawAtmosphericPressure)
- Standard deviation of AERI relative humidity in counts(countsStdDevRelativeHumidity)
- Time offset from base_time(time_offset)
- Engineering channel 0 raw counts(engineeringChannel0counts)
- -180.0 - +180.0(alt)
- North Latitude(lat)
- Time at end of interferometer data collection(rawTimeHHMMSS)
- Time at center of AERI sky observation period(Time)
- Temperature standard deviation for thermistor channel 21(tempStdDevThermistor21)
- Temperature standard deviation for thermistor channel 20(tempStdDevThermistor20)
- Temperature standard deviation for thermistor channel 23(tempStdDevThermistor23)
- Temperature standard deviation for thermistor channel 22(tempStdDevThermistor22)
- Temperature standard deviation for thermistor channel 18(tempStdDevThermistor18)
- Temperature standard deviation for thermistor channel 17(tempStdDevThermistor17)
- Engineering channel 1 raw counts(engineeringChannel1counts)
- Temperature standard deviation for thermistor channel 19(tempStdDevThermistor19)
- Julian Day including day and fraction of day(JulianDay)
more
sgpqmeaerilblC1.c1: - Integral of the AERI measured radiances over wavenumbers within each channel and
physical process category that are not saturated(integ_rad_ch_pro_unsat) - Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers between 550.1299 and 3020.1699 that are not saturated(integ_abs_resid_unsat) - Mean Barometeric Pressure from SMOS(SMOS_bar_pres)
- For each bin, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_bin) - Number of wavenumbers values over which the integral is calculated(nobs_bin_sat)
- First temperature reported by the sonde(sonde_surfT)
- Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each channel that are not saturated(integ_abs_resid_ch_unsat) - base time in epoch(base_time)
- Number of wavenumbers over which the mean or integral is calculated(nobs_ch_pro_unsat)
- Standard Deviation of Vapor Pressure from SMOS(SMOS_sd_vap_pres)
- For each channel, this gives the total number of active physical processes out
of the 12 defined for the process field(NOTE 0-indeterminate is counted)(nactive_pro_ch) - Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each channel and physical process category that are not saturated(integ_abs_resid_ch_pro_unsat) - Number of wavenumbers over which the mean or integral is calculated(nobs_bin_pro_unsat)
- Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each channel that are saturated(integ_rad_ch_sat) - Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each channel and physical process category that are not saturated(integ_rad_ch_pro_sat) - Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
that are not saturated(integ_resid_ch_unsat) - Integral of the AERI minus LBLRTM residuals for wavenumbers within each bin that
are not saturated(integ_resid_bin_unsat) - Precipitation Total from SMOS(SMOS_precip)
- Number of wavenumbers values over which the integral is calculated(nobs_pro_sat)
- Standard deviation of the average radiances in the 985-990 and 2510-2515
wavenumber windows during the AERI dwell time(aeri_dwell_atm_var) - Number of wavenumbers over which the integral is calculated(nobs_all)
- Number of wavenumbers over which the integral is calculated(nobs_bin_pro_all)
- Measure of atmospheric variability over 705-798 cm-1 (bin 3)(meas_atm_var_bin3)
- Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each bin and physical process category that are not saturated(sdev_resid_bin_pro_unsat) - Standard Deviation of Temperature from SMOS(SMOS_sd_temp)
- Mean Vapor Pressure from SMOS(SMOS_vap_pres)
- Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each bin and physical process category that are not saturated(integ_abs_resid_bin_pro_unsat) - Integral of the Planck blackbody radiances using model_surfT over wavenumbers
between 550.1299 and 3020.1699 that are saturated(integ_rad_sat) - Number of wavenumbers over which the mean or integral is calculated(nobs_pro_unsat)
- Mean of the AERI minus LBLRTM residuals for wavenumbers within each channel and
physical process category that are not saturated(mean_resid_ch_pro_unsat) - Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each bin and physical process category that are saturated(integ_rad_bin_pro_sat) - Logical flag indicating if the AERI sample was used to derive the surface
temperature value for driving the model(surface_temp_from_aeri_used) - Integral of the radiances over wavenumbers within each channel and physical
process category where the Planck function is used for saturated wavenumbers and AERI me(integ_rad_ch_pro_all) - Integral of the radiances over wavenumbers within each physical process category
where the Planck function is used for saturated wavenumbers and AERI measured radiance(integ_rad_pro_all) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each physical process category that are not saturated(sdev_resid_pro_unsat) - Integral of the AERI minus LBLRTM residuals for wavenumbers within each physical
process category that are not saturated(integ_resid_pro_unsat) - Integral of the AERI measured radiances over wavenumbers within each bin and
physical process category that are not saturated(integ_rad_bin_pro_unsat) - Standard Deviation of Relative Humidity from SMOS(SMOS_sd_rh)
- Time offset from base_time(time_offset)
- Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each bin that are not saturated(sdev_resid_bin_unsat) - Mean of the AERI minus LBLRTM residuals for wavenumbers within each channel that
are not saturated(mean_resid_ch_unsat) - Number of wavenumbers over which the mean or integral is calculated(nobs_bin_unsat)
- Number of wavenumbers values over which the integral is calculated(nobs_ch_sat)
- Mean of the AERI minus LBLRTM residuals for wavenumbers within each bin that are
not saturated(mean_resid_bin_unsat) - Number of wavenumbers values over which the integral is calculated(nobs_sat)
- Integral of the radiances over wavenumbers between 550.1299 and 3020.1699 where
the Planck function is used for saturated wavenumbers and AERI measured radiance is used ot(integ_rad_all) - MFRSR channels(channel)
- Number of wavenumbers values over which the integral is calculated(nobs_bin_pro_sat)
- Number of wavenumbers over which the integral is calculated(nobs_pro_all)
- Physical process number used as a coordinate in the process dimension(process)
- AERI sample time minus SMOS sample time(SMOS_offset_time)
- Integral of the radiances over wavenumbers within each bin and physical process
category where the Planck function is used for saturated wavenumbers and AERI measu(integ_rad_bin_pro_all) - Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each physical process category that are not saturated(mean_abs_resid_pro_unsat) - Mean Temperature from SMOS(SMOS_temp)
- Mean of the AERI minus LBLRTM residuals for wavenumbers within each bin and
physical process category that are not saturated(mean_resid_bin_pro_unsat) - Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each physical process category that are not saturated(integ_abs_resid_pro_unsat) - For each channel, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_ch) - Integral of the AERI measured radiances over wavenumbers within each channel
that are not saturated(integ_rad_ch_unsat) - Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each bin that are not saturated(mean_abs_resid_bin_unsat) - Mean of the AERI minus LBLRTM residuals for wavenumbers between 550.1299 and
3020.1699 that are not saturated(mean_resid_unsat) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers between 550.1299 and 3020.1699 that are not saturated(sdev_resid_unsat) - Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
between 550.1299 and 3020.1699 that are not saturated(mean_abs_resid_unsat) - Integral of the AERI measured radiances over wavenumbers within each physical
process category that are not saturated(integ_rad_pro_unsat) - Integral of the AERI minus LBLRTM residuals for wavenumbers within each bin and
physical process category that are not saturated(integ_resid_bin_pro_unsat) - Surface temps used in the LBLRTM runs Univ of WISC selected bands(model_surfT)
- Integral of the radiances over wavenumbers within each bin where the Planck
function is used for saturated wavenumbers and AERI measured radiance is used otherwise(integ_rad_bin_all) - Integral of the AERI minus LBLRTM residuals for wavenumbers between 550.1299 and
3020.1699 that are not saturated(integ_resid_unsat) - Bin numbers for sweep measurements(bin)
- For each bin, this gives the total number of active physical processes out of
the 12 defined for the process field (NOTE 0-indeterminate is counted)(nactive_pro_bin) - Number of wavenumbers values over which the integral is calculated(nobs_ch_pro_sat)
- AERI sample time minus Sonde release time (validation time)(sonde_offset_time)
- Number of wavenumbers over which the mean or integral is calculated(nobs_unsat)
- Indicator of large residuals in channel 1 transparent region(transparent_region_dq_flag)
- Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each channel and physical process category that are not saturated(mean_abs_resid_ch_pro_unsat) - Number of wavenumbers over which the integral is calculated(nobs_ch_all)
- Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each bin that are not saturated(integ_abs_resid_bin_unsat) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each channel and physical process category that are not saturated(sdev_resid_ch_pro_unsat) - Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each physical process category that are saturated(integ_rad_pro_sat) - Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
and physical process category that are not saturated(integ_resid_ch_pro_unsat) - Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each channel that are not saturated(mean_abs_resid_ch_unsat) - Number of wavenumbers over which the integral is calculated(nobs_bin_all)
- North Latitude(lat)
- -180.0 - +180.0(alt)
- Standard Deviation of Barometric Pressure from SMOS(SMOS_sd_bar_pres)
- Integral of the AERI measured radiances over wavenumbers within each bin that
are not saturated(integ_rad_bin_unsat) - Mean Relative Humidity from SMOS(SMOS_rh)
- Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each bin and physical process category that are not saturated(mean_abs_resid_bin_pro_unsat) - lon(lon)
- Integral of the radiances over wavenumbers within each channel where the Planck
function is used for saturated wavenumbers and AERI measured radiance is used otherwise(integ_rad_ch_all) - Mean of the AERI minus LBLRTM residuals for wavenumbers within each physical
process category that are not saturated(mean_resid_pro_unsat) - Average of brightness temperatures calculated from AERI radiances within
spectral windows, ch1:[1142.20,1147.03] & ch2:[2506.20,2511.02](mean_AERI_BT) - Number of wavenumbers over which the integral is calculated(nobs_ch_pro_all)
- Number of wavenumbers over which the mean or integral is calculated(nobs_ch_unsat)
- Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each channel that are not saturated(sdev_resid_ch_unsat) - Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each bin that are saturated(integ_rad_bin_sat) - Integral of the AERI measured radiances over wavenumbers between 550.1299 and
3020.1699 that are not saturated(integ_rad_unsat) - Difference of brightness temperatures in the ch1 window region, [1142.20,
1147.03] wavenumbers, which is an indicator of the atmospheric variability(meas_atm_var_T1) more
sgpaeriprofC1.c1: - Temperature used for calculation(temperature)
- Initial surface pressure used in retrieval(init_pressure)
- lon(lon)
- Time offset from base_time(time_offset)
- Flag indicating where the initial surface water measurements are from: 0-> SMOS,
1-> AERI(water_flag) - Height(height)
- Cloud base height used during retrieval(cloudBaseHeight)
- North Latitude(lat)
- -180.0 - +180.0(alt)
- Initial surface absolute temperature used in retrieval(init_temperature)
- Total precipitable water vapor, from Microwave Radiometer(totalPrecipitalWater)
- Initial water vapor mixing ratio used in retrieval(init_waterVaporMixingRatio)
- Derived pressure(pressure)
- Initial surface dewpoint temperature used in retrieval(init_dewpointTemperature)
- Interpolated dewpoint temperature(dewpointTemperature)
- Interpolated water vapor mixing ratio(waterVaporMixingRatio)
- base time in epoch(base_time)
more
sgpaerisummaryC1.a1: - wavenumber average of spectral radiance between 675 cm-1 and 680 cm-1 converted
to brightness temperature at mean wavenumber 677.417 cm-1(wave_num_avg_BT_675) - Thermistor input channel number 9 (counting from 0) equivalent temperature(thermistor9)
- Electronics Air(thermistor8)
- ABB #1(thermistor5)
- Thermistor input channel number 4 (counting from 0) equivalent temperature(thermistor4)
- Thermistor input channel number 7 (counting from 0) equivalent temperature(thermistor7)
- Thermistor input channel number 6 (counting from 0) equivalent temperature(thermistor6)
- Thermistor input channel number 1 (counting from 0) equivalent temperature(thermistor1)
- Ambient Air near BBs(thermistor0)
- Thermistor input channel number 3 (counting from 0) equivalent temperature(thermistor3)
- Reflected Temperature(thermistor2)
- Time offset from base_time(time_offset)
- Relative Humidity(humidity_relative)
- wavenumber average of spectral radiance between 2282 cm-1 and 2287 cm-1(wave_num_avg_rad_2282)
- wavenumber average of standard deviation of spectral radiance between 985 cm-1
and 990 cm-1(wave_num_avg_stan_dev_rad_985) - wavenumber average of spectral radiance between 2510 cm-1 and 2515 cm-1
converted to brightness temperature at mean wavenumber 2512.469 cm-1(wave_num_avg_BT_2510) - wavenumber average of standard deviation of spectral radiance between 700 cm-1
and 705 cm-1(wave_num_avg_stan_dev_rad_700) - wavenumber average of spectral radiance between 700 cm-1 and 705 cm-1(wave_num_avg_rad_700)
- base time in epoch(base_time)
- wavenumber average of spectral radiance between 985 cm-1 and 990 cm-1(wave_num_avg_rad_985)
- wavenumber average of spectral radiance between 2295 cm-1 and 2300 cm-1(wave_num_avg_rad_2295)
- wavenumber average of spectral radiance between 2282 cm-1 and 2287 cm-1
converted to brightness temperature at mean wavenumber 2282.003 cm-1(wave_num_avg_BT_2282) - wavenumber average of spectral radiance between 700 cm-1 and 705 cm-1 converted
to brightness temperature at mean wavenumber 702.488 cm-1(wave_num_avg_BT_700) - wavenumber average of spectral radiance between 2295 cm-1 and 2300 cm-1
converted to brightness temperature at mean wavenumber 2295.021 cm-1(wave_num_avg_BT_2295) - wavenumber average of standard deviation of spectral radiance between 2510 cm-1
and 2515 cm-1(wave_num_avg_stan_dev_rad_2510) - wavenumber average of spectral radiance between 985 cm-1 and 990 cm-1 converted
to brightness temperature at mean wavenumber 987.438 cm-1(wave_num_avg_BT_985) - Hatch Closed Indicator(thermistor10)
- Thermistor input channel number 11 (counting from 0) equivalent temperature(thermistor11)
- lon(lon)
- wavenumber average of standard deviation of spectral radiance between 2282 cm-1
and 2287 cm-1(wave_num_avg_stan_dev_rad_2282) - Initial data quality flag(dataType)
- wavenumber average of standard deviation of spectral radiance between 2295 cm-1
and 2300 cm-1(wave_num_avg_stan_dev_rad_2295) - wavenumber average of standard deviation of spectral radiance between 675 cm-1
and 680 cm-1(wave_num_avg_stan_dev_rad_675) - wavenumber average of spectral radiance between 675 cm-1 and 680 cm-1(wave_num_avg_rad_675)
- wavenumber average of spectral radiance between 2510 cm-1 and 2515 cm-1(wave_num_avg_rad_2510)
- Derived pressure(pressure)
- North Latitude(lat)
- -180.0 - +180.0(alt)
more
sgpaeriC1.00: - (Raw data stream - documentation not supported)
more
sgpaerisummaryC1.a2: - wavenumber average of spectral radiance between 2295 cm-1 and 2300 cm-1
converted to brightness temperature at mean wavenumber 2295.021 cm-1(wave_num_avg_BT_2295) - wavenumber average of standard deviation of spectral radiance between 675 cm-1
and 680 cm-1(wave_num_avg_stan_dev_rad_675) - Overall data quality flag(dq_flag_overall)
- wavenumber average of spectral radiance between 2282 cm-1 and 2287 cm-1
converted to brightness temperature at mean wavenumber 2282.003 cm-1(wave_num_avg_BT_2282) - Data quality flag for channel 1- 0 indicates ok, 1 indicates suspect, 2
indicates noisy (do not use)(dq_flag_ch1) - Data quality flag for channel 2- 0 indicates ok, 1 indicates suspect, 2
indicates noisy (do not use)(dq_flag_ch2) - Derived pressure(pressure)
- Thermistor input channel number 11 (counting from 0) equivalent temperature(thermistor11)
- Hatch Closed Indicator(thermistor10)
- wavenumber average of spectral radiance between 985 cm-1 and 990 cm-1(wave_num_avg_rad_985)
- wavenumber average of spectral radiance between 2510 cm-1 and 2515 cm-1
converted to brightness temperature at mean wavenumber 2512.469 cm-1(wave_num_avg_BT_2510) - Ambient Air near BBs(thermistor0)
- Thermistor input channel number 1 (counting from 0) equivalent temperature(thermistor1)
- Reflected Temperature(thermistor2)
- Thermistor input channel number 3 (counting from 0) equivalent temperature(thermistor3)
- Thermistor input channel number 4 (counting from 0) equivalent temperature(thermistor4)
- ABB #1(thermistor5)
- Thermistor input channel number 6 (counting from 0) equivalent temperature(thermistor6)
- Thermistor input channel number 7 (counting from 0) equivalent temperature(thermistor7)
- Electronics Air(thermistor8)
- Thermistor input channel number 9 (counting from 0) equivalent temperature(thermistor9)
- Initial data quality flag(dataType)
- wavenumber average of spectral radiance between 700 cm-1 and 705 cm-1(wave_num_avg_rad_700)
- wavenumber average of spectral radiance between 675 cm-1 and 680 cm-1 converted
to brightness temperature at mean wavenumber 677.417 cm-1(wave_num_avg_BT_675) - wavenumber average of spectral radiance between 2510 cm-1 and 2515 cm-1(wave_num_avg_rad_2510)
- North Latitude(lat)
- -180.0 - +180.0(alt)
- wavenumber average of spectral radiance between 700 cm-1 and 705 cm-1 converted
to brightness temperature at mean wavenumber 702.488 cm-1(wave_num_avg_BT_700) - wavenumber average of standard deviation of spectral radiance between 2510 cm-1
and 2515 cm-1(wave_num_avg_stan_dev_rad_2510) - wavenumber average of standard deviation of spectral radiance between 700 cm-1
and 705 cm-1(wave_num_avg_stan_dev_rad_700) - base time in epoch(base_time)
- Relative Humidity(humidity_relative)
- wavenumber average of spectral radiance between 675 cm-1 and 680 cm-1(wave_num_avg_rad_675)
- wavenumber average of standard deviation of spectral radiance between 985 cm-1
and 990 cm-1(wave_num_avg_stan_dev_rad_985) - wavenumber average of standard deviation of spectral radiance between 2295 cm-1
and 2300 cm-1(wave_num_avg_stan_dev_rad_2295) - wavenumber average of standard deviation of spectral radiance between 2282 cm-1
and 2287 cm-1(wave_num_avg_stan_dev_rad_2282) - lon(lon)
- wavenumber average of spectral radiance between 2282 cm-1 and 2287 cm-1(wave_num_avg_rad_2282)
- wavenumber average of spectral radiance between 2295 cm-1 and 2300 cm-1(wave_num_avg_rad_2295)
- Time offset from base_time(time_offset)
- wavenumber average of spectral radiance between 985 cm-1 and 990 cm-1 converted
to brightness temperature at mean wavenumber 987.438 cm-1(wave_num_avg_BT_985) - Flag indicating whether the hatch is open (0) or closed (1)(hatch_flag)
more
sgpaeri01ch1C1.a1: - Ambient air temperature near blackbodies(airNearBBsTemp)
- Time at center of AERI sky observation period(timeHHMMSS)
- Time offset from base_time(time_offset)
- Cold blackbody temperature used in calibration(calibrationCBBtemp)
- Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
- Signal conditioning electronics inside air temperature(SCEtemp)
- Hot blackbody temperature used in calibration(calibrationHBBtemp)
- wavenumbers for mean radiance spectra(wnum)
- BB Support Structure Temperature(BBsupportStructureTemp)
- Stirling cycle cooler expander temperature(coolerExpanderTemp)
- Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
- Scene mirror position encoder value(sceneMirPosEncoder)
- Relative humidity measured near Blackbodies. Use with air temperature near BBs
only.(atmosphericRelativeHumidity) - -180.0 - +180.0(alt)
- Electronics rack ambient temperature(rackAmbientTemp)
- Resistive temperature of 2500 ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
- North Latitude(lat)
- base time in epoch(base_time)
- Hot blackbody temperature - rim bottom(HBBbottomTemp)
- Hot blackbody temperature - apex(HBBapexTemp)
- AERI instrument hatch indicator (open, closed, neither)(hatchIndicator)
- Scene mirror motor driver heat sink temperature(motorDriverTemp)
- Julian Day including day and fraction of day(JulianDay)
- Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
- Time at end of interferometer data collection(rawTimeHHMMSS)
- lon(lon)
- Ambient blackbody temperature - rim top(ABBtopTemp)
- Blackbody controller unit 2 power supply temperature(BBcontroller2temp)
- Difference between the sky view\'s radiance variance and the hot black body
view\'s variance(standard_dev_mean_rad) - Mean of radiance spectra ensemble(mean_rad)
- Ambient temperature used in calibration(calibrationAmbientTemp)
- Stirling cycle cooler current(coolerCurrent)
- Ingest computer temperature(computerTemp)
- Detector Temperature(detectorTemp)
- Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
- Time at center of AERI sky observation period(Time)
- AERI interferometer temperature at second port(interferometerSecondPortTemp)
- Ambient blackbody temperature - apex(ABBapexTemp)
- Blackbody controller unit 1 power supply temperature(BBcontroller1temp)
- Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
- Observation atmospheric pressure in AERI electronics(atmosphericPressure)
- Wave number in reciprocal centimeters(wnum2)
- Ambient air temperature at hatch opening(outsideAirTemp)
- Scene mirror motor case temperature(mirrorMotorTemp)
- Ambient blackbody temperature(ABBbottomTemp)
- Spare temperature sensor (location TBD)(spareTemp)
- Hot blackbody temperature - rim top(HBBtopTemp)
more
sgpaerilbldifflsC1.c1: - AERI radiance spectra minus LBLRTM radiance spectra(rad_difference)
- Average of brightness temperatures calculated from AERI radiances within
spectral windows, ch1:[1142.20,1147.03] & ch2:[2506.20,2511.02](mean_AERI_BT) - lon(lon)
- MFRSR channels(channel)
- Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
that are not saturated(integ_resid_ch_unsat) - -180.0 - +180.0(alt)
- North Latitude(lat)
- base time in epoch(base_time)
- Indicator of large residuals in channel 1 transparent region(transparent_region_dq_flag)
- AERI sample time minus Sonde release time (validation time)(sonde_offset_time)
- Wavenumber for a given sample time(wavenumber)
- Logical flag indicating if the AERI sample was used to derive the surface
temperature value for driving the model(surface_temp_from_aeri_used) - Time offset from base_time(time_offset)
more
sgpqmeaerilblssC1.c1: - AERI sample time minus Sonde release time (validation time)(sonde_offset_time)
- Number of wavenumbers over which the mean or integral is calculated(nobs_ch_unsat)
- Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each bin that are not saturated(sdev_resid_bin_unsat) - Mean Relative Humidity from SMOS(SMOS_rh)
- Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
that are not saturated(integ_resid_ch_unsat) - Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each channel and physical process category that are not saturated(integ_rad_ch_pro_sat) - Indicator of large residuals in channel 1 transparent region(transparent_region_dq_flag)
- Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each physical process category that are saturated(integ_rad_pro_sat) - Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each channel that are saturated(integ_rad_ch_sat) - Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each bin that are not saturated(mean_abs_resid_bin_unsat) - Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each channel that are not saturated(mean_abs_resid_ch_unsat) - Integral of the AERI measured radiances over wavenumbers within each bin that
are not saturated(integ_rad_bin_unsat) - Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each channel and physical process category that are not saturated(mean_abs_resid_ch_pro_unsat) - Mean Barometeric Pressure from SMOS(SMOS_bar_pres)
- Standard Deviation of Relative Humidity from SMOS(SMOS_sd_rh)
- Number of wavenumbers values over which the integral is calculated(nobs_bin_sat)
- For each channel, this gives the total number of active physical processes out
of the 12 defined for the process field(NOTE 0-indeterminate is counted)(nactive_pro_ch) - Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
and physical process category that are not saturated(integ_resid_ch_pro_unsat) - Integral of the radiances over wavenumbers within each bin where the Planck
function is used for saturated wavenumbers and AERI measured radiance is used otherwise(integ_rad_bin_all) - Mean of the AERI minus LBLRTM residuals for wavenumbers within each bin and
physical process category that are not saturated(mean_resid_bin_pro_unsat) - North Latitude(lat)
- -180.0 - +180.0(alt)
- Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers between 550.1299 and 3020.1699 that are not saturated(integ_abs_resid_unsat) - Number of wavenumbers over which the integral is calculated(nobs_all)
- Integral of the AERI measured radiances over wavenumbers within each physical
process category that are not saturated(integ_rad_pro_unsat) - Standard Deviation of Vapor Pressure from SMOS(SMOS_sd_vap_pres)
- For each bin, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_bin) - Number of wavenumbers over which the mean or integral is calculated(nobs_bin_pro_unsat)
- Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
between 550.1299 and 3020.1699 that are not saturated(mean_abs_resid_unsat) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers between 550.1299 and 3020.1699 that are not saturated(sdev_resid_unsat) - Number of wavenumbers over which the mean or integral is calculated(nobs_unsat)
- Mean of the AERI minus LBLRTM residuals for wavenumbers between 550.1299 and
3020.1699 that are not saturated(mean_resid_unsat) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each physical process category that are not saturated(sdev_resid_pro_unsat) - lon(lon)
- For each channel, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_ch) - Integral of the radiances over wavenumbers within each channel where the Planck
function is used for saturated wavenumbers and AERI measured radiance is used otherwise(integ_rad_ch_all) - Mean of the AERI minus LBLRTM residuals for wavenumbers within each channel and
physical process category that are not saturated(mean_resid_ch_pro_unsat) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each bin and physical process category that are not saturated(sdev_resid_bin_pro_unsat) - Integral of the AERI measured radiances over wavenumbers within each channel and
physical process category that are not saturated(integ_rad_ch_pro_unsat) - Physical process number used as a coordinate in the process dimension(process)
- Standard Deviation of Temperature from SMOS(SMOS_sd_temp)
- Number of wavenumbers values over which the integral is calculated(nobs_bin_pro_sat)
- Time offset from base_time(time_offset)
- Integral of the Planck blackbody radiances using model_surfT over wavenumbers
between 550.1299 and 3020.1699 that are saturated(integ_rad_sat) - Number of wavenumbers over which the mean or integral is calculated(nobs_bin_unsat)
- Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each physical process category that are not saturated(mean_abs_resid_pro_unsat) - Integral of the AERI minus LBLRTM residuals for wavenumbers within each bin that
are not saturated(integ_resid_bin_unsat) - Standard Deviation of Barometric Pressure from SMOS(SMOS_sd_bar_pres)
- Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each channel that are not saturated(sdev_resid_ch_unsat) - Number of wavenumbers over which the mean or integral is calculated(nobs_pro_unsat)
- Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each bin and physical process category that are saturated(integ_rad_bin_pro_sat) - Number of wavenumbers values over which the integral is calculated(nobs_sat)
- Integral of the radiances over wavenumbers within each physical process category
where the Planck function is used for saturated wavenumbers and AERI measured radiance(integ_rad_pro_all) - Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each physical process category that are not saturated(integ_abs_resid_pro_unsat) - Integral of the AERI minus LBLRTM residuals for wavenumbers within each physical
process category that are not saturated(integ_resid_pro_unsat) - Bin numbers for sweep measurements(bin)
- Logical flag indicating if the AERI sample was used to derive the surface
temperature value for driving the model(surface_temp_from_aeri_used) - Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each channel that are not saturated(integ_abs_resid_ch_unsat) - AERI sample time minus SMOS sample time(SMOS_offset_time)
- Number of wavenumbers over which the integral is calculated(nobs_bin_all)
- Mean of the AERI minus LBLRTM residuals for wavenumbers within each physical
process category that are not saturated(mean_resid_pro_unsat) - Surface temps used in the LBLRTM runs Univ of WISC selected bands(model_surfT)
- Number of wavenumbers over which the mean or integral is calculated(nobs_ch_pro_unsat)
- Integral of the radiances over wavenumbers between 550.1299 and 3020.1699 where
the Planck function is used for saturated wavenumbers and AERI measured radiance is used ot(integ_rad_all) - Integral of the AERI minus LBLRTM residuals for wavenumbers between 550.1299 and
3020.1699 that are not saturated(integ_resid_unsat) - Standard deviation of the average radiances in the 985-990 and 2510-2515
wavenumber windows during the AERI dwell time(aeri_dwell_atm_var) - Mean Temperature from SMOS(SMOS_temp)
- Integral of the AERI measured radiances over wavenumbers within each bin and
physical process category that are not saturated(integ_rad_bin_pro_unsat) - Measure of atmospheric variability over 705-798 cm-1 (bin 3)(meas_atm_var_bin3)
- Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each bin and physical process category that are not saturated(mean_abs_resid_bin_pro_unsat) - Precipitation Total from SMOS(SMOS_precip)
- For each bin, this gives the total number of active physical processes out of
the 12 defined for the process field (NOTE 0-indeterminate is counted)(nactive_pro_bin) - Number of wavenumbers values over which the integral is calculated(nobs_ch_sat)
- Number of wavenumbers values over which the integral is calculated(nobs_ch_pro_sat)
- Mean of the AERI minus LBLRTM residuals for wavenumbers within each bin that are
not saturated(mean_resid_bin_unsat) - Number of wavenumbers over which the integral is calculated(nobs_pro_all)
- Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each bin that are not saturated(integ_abs_resid_bin_unsat) - MFRSR channels(channel)
- Integral of the radiances over wavenumbers within each channel and physical
process category where the Planck function is used for saturated wavenumbers and AERI me(integ_rad_ch_pro_all) - Integral of the radiances over wavenumbers within each bin and physical process
category where the Planck function is used for saturated wavenumbers and AERI measu(integ_rad_bin_pro_all) - Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each channel and physical process category that are not saturated(sdev_resid_ch_pro_unsat) - Mean Vapor Pressure from SMOS(SMOS_vap_pres)
- Average of brightness temperatures calculated from AERI radiances within
spectral windows, ch1:[1142.20,1147.03] & ch2:[2506.20,2511.02](mean_AERI_BT) - Number of wavenumbers over which the integral is calculated(nobs_bin_pro_all)
- Mean of the AERI minus LBLRTM residuals for wavenumbers within each channel that
are not saturated(mean_resid_ch_unsat) - Number of wavenumbers over which the integral is calculated(nobs_ch_all)
- Number of wavenumbers over which the integral is calculated(nobs_ch_pro_all)
- Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each bin that are saturated(integ_rad_bin_sat) - Number of wavenumbers values over which the integral is calculated(nobs_pro_sat)
- Integral of the AERI measured radiances over wavenumbers within each channel
that are not saturated(integ_rad_ch_unsat) - Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each channel and physical process category that are not saturated(integ_abs_resid_ch_pro_unsat) - Difference of brightness temperatures in the ch1 window region, [1142.20,
1147.03] wavenumbers, which is an indicator of the atmospheric variability(meas_atm_var_T1) - Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each bin and physical process category that are not saturated(integ_abs_resid_bin_pro_unsat) - Integral of the AERI measured radiances over wavenumbers between 550.1299 and
3020.1699 that are not saturated(integ_rad_unsat) - First temperature reported by the sonde(sonde_surfT)
- Integral of the AERI minus LBLRTM residuals for wavenumbers within each bin and
physical process category that are not saturated(integ_resid_bin_pro_unsat) - base time in epoch(base_time)
more
sgpaeri01summaryC1.a1: - Electronics rack ambient temperature(rackAmbientTemp)
- Radiance standard deviation during ambient blackbody view averaged over (985_990
cm-1)(ABBviewStdDevRadiance985_990) - Time at center of AERI sky observation period(Time)
- Logical flag indicating whether shortwave channel noise equivalent radiance is
acceptable in sky view (true/false). Determined using SWskyNEN and SWskyNENlimit.(SWskyNENacceptable) - Two minute noise estimate factor(twoMinuteNoiseEstimateFactor)
- Stirling cycle cooler current(coolerCurrent)
- The noise equivalent radiance observed in the longwave channel during a sky view
at 1000 cm-1(LWskyNEN) - Time at center of AERI sky observation period(timeHHMMSS)
- Shortwave radiance average (2295_2300 cm^-1) Surface Air(surfaceLayerRadiance2295_2300)
- Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
- Logical flag indicating whether longwave channel noise equivalent radiance is
acceptable in sky view (true/false). Determined using LWskyNEN and LWskyNENlimit.(LWskyNENacceptable) - Blackbody controller unit 1 power supply temperature(BBcontroller1temp)
- Relative humidity measured near Blackbodies. Use with air temperature near BBs
only.(atmosphericRelativeHumidity) - Characteristic value representing overall longwave channel responsivity(LWresponsivity)
- BB Support Structure Temperature(BBsupportStructureTemp)
- Ambient air temperature near blackbodies(airNearBBsTemp)
- HBB view radiance standard deviation (2282_2287 cm^-1)(HBBviewStdDevRadiance2282_2287)
- Blackbody controller unit 2 power supply temperature(BBcontroller2temp)
- Ingest computer temperature(computerTemp)
- Shortwave radiance average (2282_2287 cm^-1) elevated air(elevatedLayerRadiance2282_2287)
- ABB View Radiance Std Deviation (2295_2300 cm^-1)(ABBviewStdDevRadiance2295_2300)
- Logical flag indicating whether HBB temperature is stable (true)
or not stable
(false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable) - ABB view radiance standard deviation (700_705 cm^-1)(ABBviewStdDevRadiance700_705)
- Time offset from base_time(time_offset)
- AERI SW scene brightness temp spectral averages (ch2)(SkyBrightnessTempSpectralAveragesCh2)
- AERI LW scene brightness temp spectral averages (ch1)(SkyBrightnessTempSpectralAveragesCh1)
- Longwave elevated air brightness temperature from radiance average (700_705
cm-1)(elevatedLayerAirTemp700_705) - Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
- ABB view radiance standard deviation (2510_2515 cm^-1)(ABBviewStdDevRadiance2510_2515)
- Boolean with negative error conditions: 1:Open 0:Closed -1:Fault -2:Outside
Valid Range -3:Neither Open Nor Closed(hatchOpen) - AERI SW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch2)(HBB2minNENEstimateNo1Ch2)
- AERI LW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch1)(HBB2minNENEstimateNo1Ch1)
- Shortwave elevated air brightness temperature from radiance average (2282_2287
cm-1)(elevatedLayerAirTemp2282_2287) - Scene mirror motor driver heat sink temperature(motorDriverTemp)
- AERI LW Scene radiance spectral averages (ch1)(SkyRadianceSpectraAveragesCh1)
- AERI SW scene radiance spectral averages (ch2)(SkyRadianceSpectraAveragesCh2)
- Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
- AERI SW Scene NESR Spectral Averages (Ch2)(SkyNENCh2)
- HBB view radiance standard deviation (700_705 cm^-1)(HBBviewStdDevRadiance700_705)
- AERI LW scene NESR spectral averages (ch1)(SkyNENCh1)
- Ambient air temperature at hatch opening(outsideAirTemp)
- Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
- Ambient blackbody temperature(ABBbottomTemp)
- Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
- Hot blackbody temperature - rim bottom(HBBbottomTemp)
- Shortwave window radiance average (2510_2515 cm^-1)(shortwaveWindowRadiance2510_2515)
- Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
- AERI SW Responsivity Spectral Averages (Ch2)(ResponsivitySpectraAveragesCh2)
- Hot blackbody temperature - apex(HBBapexTemp)
- AERI LW Responsivity Spectral Averages (Ch1)(ResponsivitySpectraAveragesCh1)
- Hot blackbody temperature used in calibration(calibrationHBBtemp)
- Hot blackbody temperature - rim top(HBBtopTemp)
- Ambient blackbody temperature - apex(ABBapexTemp)
- North Latitude(lat)
- Julian Day including day and fraction of day(JulianDay)
- -180.0 - +180.0(alt)
- Detector Temperature(detectorTemp)
- Averaged wave number for LW responsivity spectral averages(wnumsum1)
- Averaged wave number for LW HBB 2min NESR estimate number 1 (ch1)(wnumsum7)
- Averaged wave number for SW scene NESR spectral averages (ch2)(wnumsum6)
- Averaged Wave number in inverse centimeters(wnumsum9)
- Averaged Wave number in inverse centimeters(wnumsum8)
- Averaged Wave number in inverse centimeters(wnumsum3)
- Averaged wave number for SW responsivity spectral averages(wnumsum2)
- Wave number in reciprocal centimeters(wnumsum5)
- Averaged Wave number in inverse centimeters(wnumsum4)
- Signal conditioning electronics inside air temperature(SCEtemp)
- Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
- The noise equivalent radiance observed in the shortwave channel during a sky
view at 2500 cm^-1(SWskyNEN) - Longwave radiance average (700_705 cm^-1) elevated air(elevatedLayerRadiance700_705)
- Radiance standard deviation during sky view averaged over (985_990 cm^-1)(skyViewStdDevRadiance985_990)
- Resistive temperature of 2500 ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
- Ambient temperature used in calibration(calibrationAmbientTemp)
- HBB view radiance standard deviation (985_990 cm^-1)(HBBviewStdDevRadiance985_990)
- AERI SW Scene Variability Spectral Averages (Ch2)(SkyUniformityCh2)
- AERI LW Scene Variability Spectral Averages (Ch1)(SkyUniformityCh1)
- Cold blackbody temperature used in calibration(calibrationCBBtemp)
- Shortwave surface air brightness temperature from radiance average (2295_2300
cm-1)(surfaceLayerAirTemp2295_2300) - Stirling cycle cooler expander temperature(coolerExpanderTemp)
- Averaged Wave number in inverse centimeters(wnumsum13)
- Averaged wave number for SW scene brightness temp spectral averages (ch2)(wnumsum14)
- Averaged wave number for SW HBB 2min NESR estimate number 2 (ch2)(wnumsum10)
- Wave number in reciprocal centimeters(wnumsum11)
- Averaged wave number for SW scene radiance spectral averages (ch2)(wnumsum12)
- Ambient blackbody temperature - rim top(ABBtopTemp)
- Scene mirror position encoder value(sceneMirPosEncoder)
- ABB View Radiance Std Deviation (675_680 cm^-1)(ABBviewStdDevRadiance675_680)
- AERI LW HBB 2min NESR estimate #2 derived from sequential HBB views (ch1)(HBB2minNENEstimateNo2Ch1)
- AERI SW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch2)(HBB2minNENEstimateNo2Ch2)
- Radiance standard deviation during sky view averaged over (2295_2300 cm^-1)(skyViewStdDevRadiance2295_2300)
- HBB view radiance standard deviation (2510_2515 cm^-1)(HBBviewStdDevRadiance2510_2515)
- Time at end of interferometer data collection(rawTimeHHMMSS)
- ABB View Radiance Std Deviation (2282_2287 cm^-1)(ABBviewStdDevRadiance2282_2287)
- Observation atmospheric pressure in AERI electronics(atmosphericPressure)
- AERI interferometer temperature at second port(interferometerSecondPortTemp)
- Radiance standard deviation during sky view averaged over (2510_2515 cm^-1)(skyViewStdDevRadiance2510_2515)
- base time in epoch(base_time)
- Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
- Longwave window radiance average (985_990 cm^-1)(longwaveWindowRadiance985_990)
- Scene mirror motor case temperature(mirrorMotorTemp)
- Longwave window brightness temperature from radiance average (985_990 cm^-1)(longwaveWindowAirTemp985_990)
- HBB view radiance standard deviation (675_680 cm^-1)(HBBviewStdDevRadiance675_680)
- lon(lon)
- AERI instrument hatch indicator (open, closed, neither)(hatchIndicator)
- Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
- Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
- The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
centered on the scene view(HBBtempDrift) - HBB View Radiance Std Deviation (2295_2300 cm^-1)(HBBviewStdDevRadiance2295_2300)
more
sgpaerich2C1.a2: - Time at center of AERI sky observation period(timeHHMMSS)
- Hatch Closed Indicator(thermistor10)
- Thermistor input channel number 11 (counting from 0) equivalent temperature(thermistor11)
- Thermistor input channel number 12 (counting from 0) equivalent temperature(thermistor12)
- Spare #2(thermistor13)
- Hot Blackbody Temperature(hotBBTemp)
- Difference between the sky view\'s radiance variance and the hot black body
view\'s variance(standard_dev_mean_rad) - base time in epoch(base_time)
- Time offset from base_time(time_offset)
- lon(lon)
- Mean of radiance spectra ensemble(mean_rad)
- Bomem Time(timeBomemHHMM)
- Wave number in reciprocal centimeters(wnum2)
- -180.0 - +180.0(alt)
- North Latitude(lat)
- Reflected Temperature(reflectedTemp)
- Thermistor input channel number 3 (counting from 0) equivalent temperature(thermistor3)
- Reflected Temperature(thermistor2)
- ABB #1(thermistor5)
- Thermistor input channel number 4 (counting from 0) equivalent temperature(thermistor4)
- Thermistor input channel number 7 (counting from 0) equivalent temperature(thermistor7)
- Thermistor input channel number 6 (counting from 0) equivalent temperature(thermistor6)
- Thermistor input channel number 9 (counting from 0) equivalent temperature(thermistor9)
- Electronics Air(thermistor8)
- Thermistor input channel number 1 (counting from 0) equivalent temperature(thermistor1)
- Ambient Air near BBs(thermistor0)
- Original Record Number in CVI or RVI file(originalRecordNumber)
- Initial data quality flag(dataType)
- wavenumbers for mean radiance spectra(wnum)
- Derived pressure(pressure)
- Cold Blackbody Temperature(coldBBTemp)
- Relative Humidity(humidity_relative)
more
sgpaerich2C1.a1: - Derived pressure(pressure)
- Difference between the sky view\'s radiance variance and the hot black body
view\'s variance(standard_dev_mean_rad) - Hatch Closed Indicator(thermistor10)
- Thermistor input channel number 11 (counting from 0) equivalent temperature(thermistor11)
- Thermistor input channel number 12 (counting from 0) equivalent temperature(thermistor12)
- Spare #2(thermistor13)
- lon(lon)
- Hot Blackbody Temperature(hotBBTemp)
- Initial data quality flag(dataType)
- Original Record Number in CVI or RVI file(originalRecordNumber)
- Reflected Temperature(reflectedTemp)
- -180.0 - +180.0(alt)
- Wave number in reciprocal centimeters(wnum2)
- North Latitude(lat)
- Thermistor input channel number 1 (counting from 0) equivalent temperature(thermistor1)
- Reflected Temperature(thermistor2)
- Ambient Air near BBs(thermistor0)
- Thermistor input channel number 9 (counting from 0) equivalent temperature(thermistor9)
- Thermistor input channel number 7 (counting from 0) equivalent temperature(thermistor7)
- Electronics Air(thermistor8)
- ABB #1(thermistor5)
- Thermistor input channel number 6 (counting from 0) equivalent temperature(thermistor6)
- Thermistor input channel number 3 (counting from 0) equivalent temperature(thermistor3)
- Thermistor input channel number 4 (counting from 0) equivalent temperature(thermistor4)
- Cold Blackbody Temperature(coldBBTemp)
- wavenumbers for mean radiance spectra(wnum)
- Bomem Time(timeBomemHHMM)
- base time in epoch(base_time)
- Time offset from base_time(time_offset)
- Mean of radiance spectra ensemble(mean_rad)
- Relative Humidity(humidity_relative)
- Time at center of AERI sky observation period(timeHHMMSS)
more
|