SGP/EBBR/E12 - All Temperature Measurements Incorrect

Failure of the multiplexer connection for the reference temperature 
thermocouple in the control box or a problem with the Campbell CR10
bridge circuitry caused all air and soil temperature measurements
to be incorrect. Therefore, the computed 30 minute bowen, e, and h were 
also incorrect.

• Soil temperature 4 (resistance ratio)(soil_temp_4_rr)
• Right T/RH sensor temperature (resistance ratio)(temp_trh_right_rr)
• Left T/RH sensor temperature (resistance ratio)(temp_trh_left_rr)
• Soil temperature 2 (resistance ratio)(soil_temp_2_rr)
• Reference temperature in enclosure (resistance ratio)(temp_reference_rr)
• Left air temperature(temp_air_left)
• Soil temperature 3 (resistance ratio)(soil_temp_3_rr)
• Soil temperature 5 (resistance ratio)(soil_temp_5_rr)
• Soil temperature 1 (resistance ratio)(soil_temp_1_rr)
• Right air temperature(temp_air_right)

• Top T/RH sensor temperature(temp_trh_top)
• Top air temperature(temp_air_top)
• Bottom air temperature(temp_air_bottom)
• Reference temperature in enclosure(temp_reference)
• Bottom T/RH sensor temperature(temp_trh_bottom)

• Soil temperature mean 3(soil_temp_3)
• Soil temperature 2(soil_temp_2)
• Half hour averaged soil temperature 5(soil_temp_5)
• Half hour averaged soil temperature 4(soil_temp_4)
• Bottom air temperature(temp_air_bottom)
• Soil temperature 1(soil_temp_1)
• Bowen ratio(bowen_ratio)
• Reference temperature in enclosure(temp_reference)
• Surface sensible heat flux(sensible_heat_flux)
• Surface latent heat flux(latent_heat_flux)
• Top air temperature(temp_air_top)
• Bottom T/RH sensor temperature(temp_trh_bottom)
• Top T/RH sensor temperature(temp_trh_top)