DQR ID | Subject | Data Streams Affected |
---|---|---|
D050803.4 | PYE/NFOV/M1 - Intermittent missing data | pyenfov2chM1.00, pyenfov2chM1.b1 |
D050803.5 | PYE/NFOV/M1 - Intermittent data gaps | pyenfov2chM1.00, pyenfov2chM1.b1 |
D060630.43 | PYE/SKYRAD/M1 - Reprocess: Longwave Calibration error | pyeskyrad60sM1.b1 |
Start Date | Start Time | End Date | End Time |
---|---|---|---|
07/18/2005 | 1900 | 09/10/2005 | 0055 |
Subject: | PYE/NFOV/M1 - Intermittent missing data |
DataStreams: | pyenfov2chM1.00, pyenfov2chM1.b1 |
Description: | During the Pt Reyes deployment of the NFOV, the instrument experienced intermittent data gaps due to communications problems. Data gaps occurred for the following date ranges: 20050718-20050723 20050727-20050730 20050803-20050804 20050813-20050816 20050820-20050822 20050826-20050827 20050830-20050902 20050908-20050910 |
Measurements: | pyenfov2chM1.00:
pyenfov2chM1.b1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
07/18/2005 | 1900 | 07/30/2005 | 1200 |
Subject: | PYE/NFOV/M1 - Intermittent data gaps |
DataStreams: | pyenfov2chM1.00, pyenfov2chM1.b1 |
Description: | Intermittent data collection of the NFOV. Data collection not successful regularly during day light hours but generally caught up during the nighttime hours. Occasionally the system stopped collecting altogether and a reboot of the network components was required to restart collection. Data gaps are largest 18 through 23 of July and 27 through 30 July. |
Measurements: | pyenfov2chM1.00:
pyenfov2chM1.b1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
02/01/2005 | 0000 | 09/14/2005 | 0000 |
Subject: | PYE/SKYRAD/M1 - Reprocess: Longwave Calibration error |
DataStreams: | pyeskyrad60sM1.b1 |
Description: | Modified pyrgeometer calibration procedures were implemented beginning in December 2003. These modified procedures introduced a calibration bias in the longwave data. The previous procedures were re-implemented at all sites between December 2005 and February 2006 to restore proper calibrations. The data collected while the incorrect procedures were in place are being reprocessing to remove the calibration bias. Note, this also affected standard deviation, maximum and minimum data fields. |
Measurements: | pyeskyrad60sM1.b1:
|