DataStreams:  sgpaeri01C1.00, sgplblch1aeriC1.c1, sgplblch2aeriC1.c1, sgpqmeaerilblC1.c1, sgpaerilbldiffC1.c1, sgpqmeaerilbllsC1.c1, sgpqmeaerimeansC1.c1, sgpaerilblcloudsC1.c1, sgpaerilbldifflsC1.c1, sgpaeriprof3feltzC1.c1

Measurements:  sgpaerilbldiffC1.c1:  Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
that are not saturated(integ_resid_ch_unsat)  hatch_open_is_true and hatch_closed_is_false(valid_aeri_data)
 Time offset from base_time(base_time)
 Sequential data channel number. See channel_explanation global attribute.(channel)
 Time offset of tweaks from base_time(time_offset)
 east longitude for all the input platforms.(lon)
 Logical flag indicating if the AERI sample was used to derive the surface
temperature value for driving the model(surface_temp_from_aeri_used)  altitude above sea levelaltunits(alt)
 Retrieved sample time (current sample time) minus sonde launch time(sonde_offset_time)
 wavenumbers for spectral differences(wavenumber)
 Average of brightness temperatures calculated from AERI radiances within
spectral windows, ch1:[1142.20,1147.03] & ch2:[2506.20,2511.02](mean_AERI_BT)  north latitude for all the input platforms.(lat)
 AERI radiance spectra minus LBLRTM radiance spectra(rad_difference)
 Indicator of large residuals in channel 1 transparent region(transparent_region_dq_flag)
sgpqmeaerimeansC1.c1:  For each bin, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_bin)  For each channel, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_ch)  Sequential data channel number. See channel_explanation global attribute.(channel)
 Physical process number used as a coordinate in the process dimension(process)
 Time offset from base_time(base_time)
 Number of wavenumber elements over which the calculations are performed(nobs_rad_ch_pro)
 The average of mean_hour_rad computed for the set of wavenumbers within a
particular bin for a fixed physical process as given in the spectral mapping function listed i(mean_rad_bin_pro)  The standard deviation of the AERI spectral radiances about the hourly averaged
mean(sdev_hour_rad)  Number of wavenumber elements over which the calculations are performed(nobs_rad_all)
 east longitude for all the input platforms.(lon)
 wavenumbers for hourly averaged spectral radiances(wavenum)
 Number of wavenumber elements over which the calculations are performed(nobs_rad_bin_pro)
 north latitude for all the input platforms.(lat)
 The average of mean_hour_rad computed over the entire wavenumber spectrum
between 520.2368 and 3020.1699(mean_rad_all)  The average of mean_hour_rad computed for the wavenumbers within each bin
(subband)(mean_rad_bin)  The average of mean_hour_rad computed over the wavenumbers for each of the AERI
channels(mean_rad_ch)  Number of wavenumber elements over which the calculations are performed(nobs_rad_pro)
 The standard deviation of mean_hour_rad about mean_rad_bin for the wavenumbers
within each bin (subband)(sdev_rad_bin)  The average of mean_hour_rad computed for the wavenumbers which are mapped to a
particular physical process as given in the spectral mapping functions listed in the global(mean_rad_pro)  For each bin, this gives the total number of active physical processes out of
the 12 defined for the process field (NOTE 0indeterminate is counted)(nactive_pro_bin)  Bin number for wavenumber subbands used as a coordinate in the bin dimension(bin)
 hatch_open_is_true and hatch_closed_is_false(valid_aeri_data)
 Number of wavenumber elements over which the calculations are performed(nobs_rad_bin)
 The standard deviation of mean_hour_rad about mean_rad over the entire
wavenumber spectrum between 520.2368 and 3020.1699(sdev_rad_all)  altitude above sea levelaltunits(alt)
 Standard deviation of mean_hour_rad about mean_rad_ch_pro for wavenumbers within
each channel and physical process category that are not saturated(sdev_rad_ch_pro)  The average of mean_hour_rad computed for the set of wavenumbers within a
particular channel for a fixed physical process as given in the spectral mapping function liste(mean_rad_ch_pro)  Number of wavenumber elements over which the calculations are performed(nobs_rad_ch)
 The standard deviation of mean_hour_rad about mean_rad_bin_pro for the set of
wavenumbers within a particular bin for a fixed physical process(sdev_rad_bin_pro)  Time offset of tweaks from base_time(time_offset)
 The number of spectra over which the hourly calculations are performed(nobs_hour_rad)
 For each channel, this gives the total number of active physical processes out
of the 12 defined for the process field(NOTE 0indeterminate is counted)(nactive_pro_ch)  The standard deviation of mean_hour_rad about mean_rad_pro for the set of
wavenumbers which are mapped to a particular physical process(sdev_rad_pro)  The AERI spectral radiances averaged over an hour window centered on the time of
the LBLRTM rundeck(mean_hour_rad)  The standard deviation of mean_hour_rad about mean_rad_ch computed over the
wavenumbers for each of the AERI channels(sdev_rad_ch)
sgpaeri01C1.00:  Raw data stream  documentation not supported(Raw data stream  documentation not supported)
sgplblch1aeriC1.c1:  Maximum height reached by this sonde launch(max_sonde_alt)
 Surface temperature from wavenumber average of spectral radiance at mean
wavenumber 2295.021 cm1(wisc_summary_T_ch2)  Surface temperature from wavenumber average of spectral radiance at mean
wavenumber 677.417 cm1(wisc_summary_T_ch1)  column ozone(ozone)
 wavenumbers for mean radiance spectra(wnum)
 Time offset from base_time(base_time)
 LBLRTM Model radiance spectra(model_rad)
 Surface temperature as reported by sonde(sonde_surface_T)
 Serial number for the sonde used at this time.(sonde_serial_number)
 Time offset of tweaks from base_time(time_offset)
 north latitude for all the input platforms.(lat)
 east longitude for all the input platforms.(lon)
 altitude above sea levelaltunits(alt)
 Sonde launch time minus surface temperature time(surface_time_offset)
sgpqmeaerilbllsC1.c1:  Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each channel that are not saturated(integ_abs_resid_ch_unsat)  Sequential data channel number. See channel_explanation global attribute.(channel)
 Time offset of tweaks from base_time(time_offset)
 Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each channel and physical process category that are not saturated(mean_abs_resid_ch_pro_unsat)  Mean of the AERI minus LBLRTM residuals for wavenumbers within each channel that
are not saturated(mean_resid_ch_unsat)  Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each physical process category that are not saturated(sdev_resid_pro_unsat)  Mean Temperature from SMOS(SMOS_temp)
 Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each channel that are not saturated(mean_abs_resid_ch_unsat)  Mean of the AERI minus LBLRTM residuals for wavenumbers within each bin and
physical process category that are not saturated(mean_resid_bin_pro_unsat)  Precipitation Total from SMOS(SMOS_precip)
 Integral of the AERI measured radiances over wavenumbers within each bin and
physical process category that are not saturated(integ_rad_bin_pro_unsat)  Number of wavenumbers values over which the integral is calculated(nobs_sat)
 Number of wavenumbers over which the integral is calculated(nobs_pro_all)
 Integral of the radiances over wavenumbers within each channel and physical
process category where the Planck function is used for saturated wavenumbers and AERI me(integ_rad_ch_pro_all)  Integral of the AERI measured radiances over wavenumbers within each channel
that are not saturated(integ_rad_ch_unsat)  Integral of the AERI minus LBLRTM residuals for wavenumbers within each physical
process category that are not saturated(integ_resid_pro_unsat)  Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each physical process category that are not saturated(integ_abs_resid_pro_unsat)  Difference of brightness temperatures in the ch1 window region, [1142.20,
1147.03] wavenumbers, which is an indicator of the atmospheric variability(meas_atm_var_T1)  Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each channel that are not saturated(sdev_resid_ch_unsat)  Mean of the AERI minus LBLRTM residuals for wavenumbers between 550.1299 and
3020.1699 that are not saturated(mean_resid_unsat)  Integral of the AERI minus LBLRTM residuals for wavenumbers within each bin and
physical process category that are not saturated(integ_resid_bin_pro_unsat)  Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each bin that are not saturated(sdev_resid_bin_unsat)  Number of wavenumbers over which the mean or integral is calculated(nobs_ch_unsat)
 Surface temps used in the LBLRTM runs  Univ of WISC selected bands(model_surfT)
 north latitude for all the input platforms.(lat)
 Standard Deviation of Temperature from SMOS(SMOS_sd_temp)
 Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each bin and physical process category that are not saturated(integ_abs_resid_bin_pro_unsat)  Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each bin that are not saturated(integ_abs_resid_bin_unsat)  Integral of the AERI measured radiances over wavenumbers within each physical
process category that are not saturated(integ_rad_pro_unsat)  Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers between 550.1299 and 3020.1699 that are not saturated(integ_abs_resid_unsat)  Standard Deviation of Vapor Pressure from SMOS(SMOS_sd_vap_pres)
 Number of wavenumbers over which the integral is calculated(nobs_bin_all)
 Standard deviation of the average radiances in the 985990 and 25102515
wavenumber windows during the AERI dwell time(aeri_dwell_atm_var)  For each channel, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_ch)  Time offset from base_time(base_time)
 Integral of the radiances over wavenumbers within each bin and physical process
category where the Planck function is used for saturated wavenumbers and AERI measu(integ_rad_bin_pro_all)  Standard Deviation of Relative Humidity from SMOS(SMOS_sd_rh)
 Integral of the AERI minus LBLRTM residuals for wavenumbers within each bin that
are not saturated(integ_resid_bin_unsat)  AERI sample time minus SMOS sample time(SMOS_offset_time)
 Retrieved sample time (current sample time) minus sonde launch time(sonde_offset_time)
 Number of wavenumbers values over which the integral is calculated(nobs_ch_sat)
 Mean of the AERI minus LBLRTM residuals for wavenumbers within each channel and
physical process category that are not saturated(mean_resid_ch_pro_unsat)  Logical flag indicating if the AERI sample was used to derive the surface
temperature value for driving the model(surface_temp_from_aeri_used)  Standard Deviation of Barometric Pressure from SMOS(SMOS_sd_bar_pres)
 Integral of the AERI measured radiances over wavenumbers within each channel and
physical process category that are not saturated(integ_rad_ch_pro_unsat)  For each bin, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_bin)  Integral of the radiances over wavenumbers within each physical process category
where the Planck function is used for saturated wavenumbers and AERI measured radiance(integ_rad_pro_all)  For each bin, this gives the total number of active physical processes out of
the 12 defined for the process field (NOTE 0indeterminate is counted)(nactive_pro_bin)  Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each channel and physical process category that are not saturated(integ_abs_resid_ch_pro_unsat)  Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each channel that are saturated(integ_rad_ch_sat)  Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each bin and physical process category that are not saturated(mean_abs_resid_bin_pro_unsat)  Integral of the radiances over wavenumbers within each channel where the Planck
function is used for saturated wavenumbers and AERI measured radiance is used otherwise(integ_rad_ch_all)  Integral of the AERI measured radiances over wavenumbers within each bin that
are not saturated(integ_rad_bin_unsat)  Number of wavenumbers values over which the integral is calculated(nobs_bin_pro_sat)
 Number of wavenumbers values over which the integral is calculated(nobs_bin_sat)
 Number of wavenumbers over which the integral is calculated(nobs_ch_all)
 Bin number for wavenumber subbands used as a coordinate in the bin dimension(bin)
 Mean Barometeric Pressure from SMOS(SMOS_bar_pres)
 Physical process number used as a coordinate in the process dimension(process)
 Number of wavenumbers values over which the integral is calculated(nobs_pro_sat)
 Average of brightness temperatures calculated from AERI radiances within
spectral windows, ch1:[1142.20,1147.03] & ch2:[2506.20,2511.02](mean_AERI_BT)  For each channel, this gives the total number of active physical processes out
of the 12 defined for the process field(NOTE 0indeterminate is counted)(nactive_pro_ch)  Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each bin and physical process category that are not saturated(sdev_resid_bin_pro_unsat)  Mean of the AERI minus LBLRTM residuals for wavenumbers within each physical
process category that are not saturated(mean_resid_pro_unsat)  Integral of the radiances over wavenumbers between 550.1299 and 3020.1699 where
the Planck function is used for saturated wavenumbers and AERI measured radiance is used ot(integ_rad_all)  Number of wavenumbers over which the integral is calculated(nobs_ch_pro_all)
 Number of wavenumbers values over which the integral is calculated(nobs_ch_pro_sat)
 Integral of the AERI minus LBLRTM residuals for wavenumbers between 550.1299 and
3020.1699 that are not saturated(integ_resid_unsat)  Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
and physical process category that are not saturated(integ_resid_ch_pro_unsat)  Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
that are not saturated(integ_resid_ch_unsat)  Measure of atmospheric variability over 705798 cm1 (bin 3)(meas_atm_var_bin3)
 Mean of the AERI minus LBLRTM residuals for wavenumbers within each bin that are
not saturated(mean_resid_bin_unsat)  east longitude for all the input platforms.(lon)
 Mean Relative Humidity from SMOS(SMOS_rh)
 Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
between 550.1299 and 3020.1699 that are not saturated(mean_abs_resid_unsat)  Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each physical process category that are not saturated(mean_abs_resid_pro_unsat)  Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers between 550.1299 and 3020.1699 that are not saturated(sdev_resid_unsat)  Number of wavenumbers over which the mean or integral is calculated(nobs_unsat)
 Number of wavenumbers over which the mean or integral is calculated(nobs_pro_unsat)
 Number of wavenumbers over which the integral is calculated(nobs_bin_pro_all)
 Number of wavenumbers over which the mean or integral is calculated(nobs_ch_pro_unsat)
 Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each bin and physical process category that are saturated(integ_rad_bin_pro_sat)  Integral of the radiances over wavenumbers within each bin where the Planck
function is used for saturated wavenumbers and AERI measured radiance is used otherwise(integ_rad_bin_all)  Integral of the AERI measured radiances over wavenumbers between 550.1299 and
3020.1699 that are not saturated(integ_rad_unsat)  Indicator of large residuals in channel 1 transparent region(transparent_region_dq_flag)
 Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each bin that are saturated(integ_rad_bin_sat)  altitude above sea levelaltunits(alt)
 Mean Vapor Pressure from SMOS(SMOS_vap_pres)
 Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each channel and physical process category that are not saturated(sdev_resid_ch_pro_unsat)  Integral of the Planck blackbody radiances using model_surfT over wavenumbers
between 550.1299 and 3020.1699 that are saturated(integ_rad_sat)  Number of wavenumbers over which the integral is calculated(nobs_all)
 Number of wavenumbers over which the mean or integral is calculated(nobs_bin_pro_unsat)
 First temperature reported by the sonde(sonde_surfT)
 Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each channel and physical process category that are not saturated(integ_rad_ch_pro_sat)  Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each bin that are not saturated(mean_abs_resid_bin_unsat)  Number of wavenumbers over which the mean or integral is calculated(nobs_bin_unsat)
 Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each physical process category that are saturated(integ_rad_pro_sat)
sgpaerilbldifflsC1.c1:  Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
that are not saturated(integ_resid_ch_unsat)  Sequential data channel number. See channel_explanation global attribute.(channel)
 Logical flag indicating if the AERI sample was used to derive the surface
temperature value for driving the model(surface_temp_from_aeri_used)  Average of brightness temperatures calculated from AERI radiances within
spectral windows, ch1:[1142.20,1147.03] & ch2:[2506.20,2511.02](mean_AERI_BT)  Time offset from base_time(base_time)
 altitude above sea levelaltunits(alt)
 wavenumbers for spectral differences(wavenumber)
 Retrieved sample time (current sample time) minus sonde launch time(sonde_offset_time)
 AERI radiance spectra minus LBLRTM radiance spectra(rad_difference)
 north latitude for all the input platforms.(lat)
 Time offset of tweaks from base_time(time_offset)
 Indicator of large residuals in channel 1 transparent region(transparent_region_dq_flag)
 east longitude for all the input platforms.(lon)
sgpqmeaerilblC1.c1:  Standard Deviation of Relative Humidity from SMOS(SMOS_sd_rh)
 Number of wavenumbers over which the integral is calculated(nobs_bin_pro_all)
 Standard Deviation of Temperature from SMOS(SMOS_sd_temp)
 Logical flag indicating if the AERI sample was used to derive the surface
temperature value for driving the model(surface_temp_from_aeri_used)  Mean of the AERI minus LBLRTM residuals for wavenumbers within each physical
process category that are not saturated(mean_resid_pro_unsat)  Mean of the AERI minus LBLRTM residuals for wavenumbers between 550.1299 and
3020.1699 that are not saturated(mean_resid_unsat)  Integral of the radiances over wavenumbers between 550.1299 and 3020.1699 where
the Planck function is used for saturated wavenumbers and AERI measured radiance is used ot(integ_rad_all)  The mean of the AERI minus LBLRTM modeled residuals over the set of wavenumbers
which are mapped to a particular physical process as given in the spectral mapping functio(mean_resid_pro)  Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
that are not saturated(integ_resid_ch_unsat)  Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each physical process category that are not saturated(sdev_resid_pro_unsat)  Standard deviation of the average radiances in the 985990 and 25102515
wavenumber windows during the AERI dwell time(aeri_dwell_atm_var)  Number of wavenumbers over which the mean or integral is calculated(nobs_bin_pro_unsat)
 Number of wavenumbers over which the mean or integral is calculated(nobs_ch_pro_unsat)
 Average of brightness temperatures calculated from AERI radiances within
spectral windows, ch1:[1142.20,1147.03] & ch2:[2506.20,2511.02](mean_AERI_BT)  The standard deviation about the mean of the AERI minus LBLRTM modeled residuals
within a particular channel for a fixed physical process(sdev_resid_ch_pro)  The mean of the AERI minus LBLRTM modeled residuals over the entire wavenumber
spectrum between 520.2368 and 3020.1699(mean_resid)  Mean of the AERI minus LBLRTM residuals for wavenumbers within each channel and
physical process category that are not saturated(mean_resid_ch_pro_unsat)  Integral of the AERI measured radiances over wavenumbers within each channel and
physical process category that are not saturated(integ_rad_ch_pro_unsat)  Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each physical process category that are saturated(integ_rad_pro_sat)  Number of wavenumbers over which the integral is calculated(nobs_ch_pro_all)
 The standard deviation about the mean of the AERI minus LBLRTM modeled residuals
within a particular bin for a fixed physical process(sdev_resid_bin_pro)  Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each bin that are not saturated(integ_abs_resid_bin_unsat)  Number of residuals over which the mean is calculated(nobs_resid_bin)
 For each bin, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_bin)  Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each channel that are saturated(integ_rad_ch_sat)  east longitude for all the input platforms.(lon)
 Mean Relative Humidity from SMOS(SMOS_rh)
 The mean of the AERI minus LBLRTM modeled residuals within a particular channel
for a fixed physical process as given in the spectral mapping function listed in the gl(mean_resid_ch_pro)  Time offset of tweaks from base_time(time_offset)
 Integral of the AERI measured radiances over wavenumbers within each physical
process category that are not saturated(integ_rad_pro_unsat)  AERI sample time minus SMOS sample time(SMOS_offset_time)
 Number of residuals over which the mean is calculated(nobs_resid_bin_pro)
 Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each bin and physical process category that are saturated(integ_rad_bin_pro_sat)  Indicator of large residuals in channel 1 transparent region(transparent_region_dq_flag)
 Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each bin and physical process category that are not saturated(integ_abs_resid_bin_pro_unsat)  Sequential data channel number. See channel_explanation global attribute.(channel)
 Number of wavenumbers over which the integral is calculated(nobs_pro_all)
 Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each bin that are not saturated(mean_abs_resid_bin_unsat)  Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each channel that are not saturated(sdev_resid_ch_unsat)  The mean of the AERI minus LBLRTM modeled residuals over the wavenumbers for
each of the AERI channels(mean_resid_ch)  Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers between 550.1299 and 3020.1699 that are not saturated(sdev_resid_unsat)  Number of wavenumbers values over which the integral is calculated(nobs_sat)
 Integral of the AERI minus LBLRTM residuals for wavenumbers within each channel
and physical process category that are not saturated(integ_resid_ch_pro_unsat)  Mean of the AERI minus LBLRTM residuals for wavenumbers within each channel that
are not saturated(mean_resid_ch_unsat)  Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each physical process category that are not saturated(mean_abs_resid_pro_unsat)  Number of wavenumbers over which the integral is calculated(nobs_all)
 Integral of the radiances over wavenumbers within each physical process category
where the Planck function is used for saturated wavenumbers and AERI measured radiance(integ_rad_pro_all)  Integral of the AERI minus LBLRTM residuals for wavenumbers within each bin and
physical process category that are not saturated(integ_resid_bin_pro_unsat)  Difference of brightness temperatures in the ch1 window region, [1142.20,
1147.03] wavenumbers, which is an indicator of the atmospheric variability(meas_atm_var_T1)  Standard Deviation of Barometric Pressure from SMOS(SMOS_sd_bar_pres)
 Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers between 550.1299 and 3020.1699 that are not saturated(integ_abs_resid_unsat)  Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each channel and physical process category that are not saturated(integ_rad_ch_pro_sat)  The standard deviation about the mean of the AERI minus LBLRTM modeled residuals
over the wavenumbers for each of the bins (subbands)(sdev_resid_bin)  Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each bin and physical process category that are not saturated(sdev_resid_bin_pro_unsat)  Number of wavenumbers values over which the integral is calculated(nobs_bin_sat)
 Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each channel that are not saturated(integ_abs_resid_ch_unsat)  Integral of the AERI minus LBLRTM residuals for wavenumbers between 550.1299 and
3020.1699 that are not saturated(integ_resid_unsat)  Bin number for wavenumber subbands used as a coordinate in the bin dimension(bin)
 Integral of the radiances over wavenumbers within each bin and physical process
category where the Planck function is used for saturated wavenumbers and AERI measu(integ_rad_bin_pro_all)  Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each channel that are not saturated(mean_abs_resid_ch_unsat)  First temperature reported by the sonde(sonde_surfT)
 altitude above sea levelaltunits(alt)
 Integral of the AERI measured radiances over wavenumbers within each bin that
are not saturated(integ_rad_bin_unsat)  Number of wavenumbers over which the integral is calculated(nobs_bin_all)
 hatch_open_is_true and hatch_closed_is_false(valid_aeri_data)
 Physical process number used as a coordinate in the process dimension(process)
 For each channel, this gives the total number of active physical processes out
of the 12 defined for the process field(NOTE 0indeterminate is counted)(nactive_pro_ch)  Integral of the AERI minus LBLRTM residuals for wavenumbers within each physical
process category that are not saturated(integ_resid_pro_unsat)  The standard deviation about the mean of the AERI minus LBLRTM modeled residuals
over the set of wavenumbers which are mapped to a particular physical process(sdev_resid_pro)  Mean of the AERI minus LBLRTM residuals for wavenumbers within each bin that are
not saturated(mean_resid_bin_unsat)  Integral of the AERI measured radiances over wavenumbers within each channel
that are not saturated(integ_rad_ch_unsat)  Number of residuals over which the mean is calculated(nobs_resid_pro)
 Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each physical process category that are not saturated(integ_abs_resid_pro_unsat)  Number of wavenumbers over which the mean or integral is calculated(nobs_unsat)
 Integral of the Planck blackbody radiances using model_surfT over wavenumbers
between 550.1299 and 3020.1699 that are saturated(integ_rad_sat)  Number of wavenumbers values over which the integral is calculated(nobs_bin_pro_sat)
 Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each channel and physical process category that are not saturated(sdev_resid_ch_pro_unsat)  Integral of the AERI measured radiances over wavenumbers between 550.1299 and
3020.1699 that are not saturated(integ_rad_unsat)  Time offset from base_time(base_time)
 Mean of the AERI minus LBLRTM residuals for wavenumbers within each bin and
physical process category that are not saturated(mean_resid_bin_pro_unsat)  Precipitation Total from SMOS(SMOS_precip)
 north latitude for all the input platforms.(lat)
 Integral of the Planck blackbody radiances using model_surfT over wavenumbers
within each bin that are saturated(integ_rad_bin_sat)  Number of wavenumbers over which the mean or integral is calculated(nobs_bin_unsat)
 The standard deviation about the mean of the AERI minus LBLRTM modeled residuals
over the wavenumbers for each of the AERI channels(sdev_resid_ch)  The standard deviation about the mean of the AERI minus LBLRTM modeled residuals
over the entire wavenumber spectrum between 520.2368 and 3020.1699(sdev_resid)  Number of residuals over which the mean is calculated(nobs_resid_ch)
 Number of residuals over which the mean is calculated(nobs_resid_ch_pro)
 Number of wavenumbers values over which the integral is calculated(nobs_ch_sat)
 Mean Barometeric Pressure from SMOS(SMOS_bar_pres)
 Measure of atmospheric variability over 705798 cm1 (bin 3)(meas_atm_var_bin3)
 Integral of the radiances over wavenumbers within each channel and physical
process category where the Planck function is used for saturated wavenumbers and AERI me(integ_rad_ch_pro_all)  For each bin, this gives the total number of active physical processes out of
the 12 defined for the process field (NOTE 0indeterminate is counted)(nactive_pro_bin)  Integral of the AERI minus LBLRTM residuals for wavenumbers within each bin that
are not saturated(integ_resid_bin_unsat)  Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each channel and physical process category that are not saturated(mean_abs_resid_ch_pro_unsat)  Number of wavenumbers over which the integral is calculated(nobs_ch_all)
 Standard deviation about the mean of the AERI minus LBLRTM residuals for
wavenumbers within each bin that are not saturated(sdev_resid_bin_unsat)  Integral of the radiances over wavenumbers within each bin where the Planck
function is used for saturated wavenumbers and AERI measured radiance is used otherwise(integ_rad_bin_all)  Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
between 550.1299 and 3020.1699 that are not saturated(mean_abs_resid_unsat)  Integral of the radiances over wavenumbers within each channel where the Planck
function is used for saturated wavenumbers and AERI measured radiance is used otherwise(integ_rad_ch_all)  Mean of the absolute value of the AERI minus LBLRTM residuals for wavenumbers
within each bin and physical process category that are not saturated(mean_abs_resid_bin_pro_unsat)  Number of wavenumbers values over which the integral is calculated(nobs_ch_pro_sat)
 Integral of the absolute value of the AERI minus LBLRTM residuals for
wavenumbers within each channel and physical process category that are not saturated(integ_abs_resid_ch_pro_unsat)  Mean Vapor Pressure from SMOS(SMOS_vap_pres)
 Surface temps used in the LBLRTM runs  Univ of WISC selected bands(model_surfT)
 Number of wavenumbers values over which the integral is calculated(nobs_pro_sat)
 Mean Temperature from SMOS(SMOS_temp)
 Number of wavenumbers over which the mean or integral is calculated(nobs_ch_unsat)
 For each channel, this gives the process number of all active physical processes
identified by the spectral mapping(active_pro_ch)  Standard Deviation of Vapor Pressure from SMOS(SMOS_sd_vap_pres)
 Integral of the AERI measured radiances over wavenumbers within each bin and
physical process category that are not saturated(integ_rad_bin_pro_unsat)  Number of residuals over which the mean is calculated(nobs_resid)
 The mean of the AERI minus LBLRTM modeled residuals within a particular bin for
a fixed physical process as given in the spectral mapping function listed in the globa(mean_resid_bin_pro)  The mean of the AERI minus LBLRTM modeled residuals over the wavenumbers for
each of the bins (subbands)(mean_resid_bin)  Retrieved sample time (current sample time) minus sonde launch time(sonde_offset_time)
 Number of wavenumbers over which the mean or integral is calculated(nobs_pro_unsat)
sgpaerilblcloudsC1.c1:  Number of cloudy observations in ensemble(nobs_mpl_cbh)
 altitude above sea levelaltunits(alt)
 Number of clear observations in ensemble(nobs_cloud3_clear)
 Number of foggy observations in ensemble (probably condensation on the window)(nobs_mpl_foggy)
 Standard deviation of vap ensemble(sdev_vap)
 Retrieved sample time (current sample time) minus sonde launch time(sonde_offset_time)
 Average of brightness temperatures calculated from AERI radiances within
spectral window for channel 2: [2506.20,2511.02](mean_AERI_BT_channel_2)  Standard deviation of 23tbsky ensemble(sdev_23tbsky_large)
 Standard deviation of 31tbsky ensemble(sdev_31tbsky)
 Standard deviation of mpl_cbh ensemble(sdev_mpl_cbh)
 Integrated vapor column from sonde using MWR Instrument Performance Model (IPM)(integ_vap_sonde)
 Cloud detection flag from sgpaerilblcloudsC1.c1(nonclear_flag)
 Ensemble average of first cloud base height from the Belfort ceilometer(mean_cloud1_cbh)
 Ensemble average of ratios of direct_norm_broadband divided by
diffuse_hemisp_broadband from the SIROS(mean_dir_by_diff_ratio)  Number of cloudy observations in ensemble(nobs_cloud1_cbh)
 east longitude for all the input platforms.(lon)
 Time offset of tweaks from base_time(time_offset)
 Number of observations in each MWR ensemble (23tbsky, 31tbsky, vap, liq)(nobs_mwr_ensembles)
 Standard deviation of the average radiance in the 25102515 wavenumber window
during the AERI dwell time(aeri_dwell_atm_var_channel_2)  Cloud base height from the MPL(mean_mpl_cbh)
 Number of observations in each `large` MWR ensemble (23tbsky and 31tbsky)(nobs_mwr_ensembles_large)
 Standard deviation of the average radiance in the 985990 wavenumber window
during the AERI dwell time(aeri_dwell_atm_var_channel_1)  Number of clear observations in ensemble(nobs_mpl_clear)
 Standard deviation of ratio ensemble about mean_dir_to_diff_ratio(sdev_dir_by_diff_ratio)
 Serial number for the sonde used at this time.(sonde_serial_number)
 Average IR temperature from the IRT (on the MWR)(mean_irt)
 Ensemble average of second cloud base height from the Belfort ceilometer(mean_cloud2_cbh)
 Ensemble average of third cloud base height from the Belfort ceilometer(mean_cloud3_cbh)
 AERI sample time minus WSI image time(wsi_offset_time)
 Ensemble average of 23.8 GHz sky brightness temperature from the MWR(mean_23tbsky)
 Number of cloudy observations in ensemble(nobs_cloud2_cbh)
 Data quality flag for MPL cbh ensemble(mpl_cbh_dq_flag)
 Number of clear observations in ensemble(nobs_cloud2_clear)
 Time offset from base_time(base_time)
 north latitude for all the input platforms.(lat)
 Standard deviation of cloud1 ensemble(sdev_cloud1_cbh)
 Standard deviation of 31tbsky ensemble(sdev_31tbsky_large)
 Number of ratios in ensemble(nobs_dir_by_diff_ratio)
 Cloud base height estimate from the field mean_AERI_BT_channel_1(cbh_AERI_channel_1)
 Calculated cloud cover fraction from the WSI(cloud_cover_fract)
 Standard deviation of the IR temperature ensemble(sdev_irt)
 Ensemble average of total water vapor along LOS path from the MWR(mean_vap)
 Average total liquid water along LOS path from the MWR(mean_liq)
 Standard deviation of 23tbsky ensemble(sdev_23tbsky)
 Cloud base height estimate from the field mean_AERI_BT_channel_2(cbh_AERI_channel_2)
 Standard deviation of liq ensemble(sdev_liq)
 Number of cloudy observations in ensemble(nobs_cloud3_cbh)
 Calculated cloud cover fraction from the WSI(cloud_cover_frac)
 IR temperature calculated from the AERI spectral response function used to
mimick the output from the IR thermometer on the MWR(calculated_irt)  Calculated number of clouds in WSI image(num_cloud)
 Average of brightness temperatures calculated from AERI radiances within
spectral window for channel 1: [1142.20,1147.03](mean_AERI_BT_channel_1)  Standard deviation of cloud2 ensemble(sdev_cloud2_cbh)
 Standard deviation of cloud3 ensemble(sdev_cloud3_cbh)
 Binary field indicating which inputs are available and used to set the
nonclear_flag(nonclear_inputs)  Ensemble average of 31.4 GHz sky brightness temperature from the MWR(mean_31tbsky)
 Number of clear observations in ensemble(nobs_cloud1_clear)
sgplblch2aeriC1.c1:  Time offset from base_time(base_time)
 Maximum height reached by this sonde launch(max_sonde_alt)
 altitude above sea levelaltunits(alt)
 Sonde launch time minus surface temperature time(surface_time_offset)
 east longitude for all the input platforms.(lon)
 column ozone(ozone)
 Surface temperature from wavenumber average of spectral radiance at mean
wavenumber 677.417 cm1(wisc_summary_T_ch1)  Serial number for the sonde used at this time.(sonde_serial_number)
 wavenumbers for mean radiance spectra(wnum)
 Surface temperature from wavenumber average of spectral radiance at mean
wavenumber 2295.021 cm1(wisc_summary_T_ch2)  Surface temperature as reported by sonde(sonde_surface_T)
 north latitude for all the input platforms.(lat)
 Time offset of tweaks from base_time(time_offset)
 LBLRTM Model radiance spectra(model_rad)
sgpaeriprof3feltzC1.c1:  Interpolated dewpoint temperature(dewpointTemperature)
 Cloudbase height, from Micropulse LIDAR or Belfort LIDAR ceilometer(cloudBaseHeight)
 CPL retrieval of absolute temperature(CPL_ambientTemp)
 Interpolated water vapor mixing ratio(waterVaporMixingRatio)
 Auxilliary flags for THIS retrieval(auxDataFlagsNow)
 profile source flag(profile_source_flag)
 CPL height array for the profile(CPL_height)
 altitude above sea levelaltunits(alt)
 Total precipitable water vapor, from Microwave Radiometer(totalPrecipitalWater)
 Auxilliary flags for TODAY(auxDataFlagsToday)
 Retrieval rejection flag(retrievalRejectionFlag)
 Height of bins above ground level for the temperature, retrieved water vapor,
and pressure profile(height)  east longitude for all the input platforms.(lon)
 north latitude for all the input platforms.(lat)
 CPL retrieval of atmospheric Pressure(CPL_pressure)
 Temperature used to determine the backscatter profile(temperature)
 Time offset from base_time(base_time)
 atmospheric pressure at mean sea level and at tropopause (NGM250 predicted)(pressure)
 Constant Pressure Level (Wisc original pres_level)(CPL)
 CPL retrieval of dewpoint temperature(CPL_dewpointTemp)
 CPL retrieval of water vapor mixing ratio(CPL_waterVaporMixingRatio)
 Time offset of tweaks from base_time(time_offset)
 Time offset from midnight of date of file. For CO data, this is identical to
time_offset and is included for compatibility.(time)
