| Subject: | NSA/MWRP/C1 - Missing data |
| DataStreams: | nsamwrpC1.00, nsamwrpC1.b1, nsamwrprawC1.00
|
| Description: | After a power outage the MWRP did not come back up. The instrument was sent to the vendor
for repair. |
| Measurements: | nsamwrpC1.00: - Raw data stream - documentation not supported(raw)
nsamwrpC1.b1: - Expected root-mean-square error in liquid water path retrieval(liquidWaterPathRmsError)
- Derived relative humidity(relativeHumidity)
- Internal blackbody reference temperature(blackbodyTemperature)
- Expected root-mean-square error in temperature retrieval(temperatureRmsError)
- Retrieved liquid water path(liquidWaterPath)
- Surface pressure at instrument(surfacePressure)
- atmospheric pressure at mean sea level and at tropopause (NGM250 predicted)(pressure)
- Retrieved liquid water path using only 23.835 and 30.0 GHz(liquidWaterPath2)
- Data quality flags(dataQualityFlags)
- Surface water vapor density at instrument(surfaceWaterVaporDensity)
- Derived virtual temperature(virtualTemperature)
- Expected root-mean-square error in water vapor density retrieval(waterVaporDensityRmsError)
- Equilibrium level pressure(equilibriumLevelPres)
- Time offset from base_time(base_time)
- Zenith-pointing infrared temperature at 10um(infraredTemperature)
- Height of bins above ground level for the temperature, retrieved water vapor,
and pressure profile(height) - north latitude for all the input platforms.(lat)
- altitude above sea levelaltunits(alt)
- Retrieved total precipitable water vapor(totalPrecipitableWater)
- Interpolated dewpoint temperature(dewpointTemperature)
- Solar azimuth referenced to the Central Facility.(azimuth)
- Cloud-base height, from Micropulse LIDAR or Belfort LIDAR ceilometer(cloudBaseHeight)
- Expected root-mean-square error in precipitable water retrieval using only
23.835 and 30.0 GHz(totalPrecipitableWater2RmsError) - Expected root-mean-square error in precipitable water retrieval(totalPrecipitableWaterRmsError)
- Elevation angle of Beam 0(elevation)
- Lifting condensation level pressure(liftingCondensationLevelPres)
- Level of free convection pressure(levelFreeConvectionPres)
- Retrieved water vapor density(waterVaporDensity)
- east longitude for all the input platforms.(lon)
- Retrieved total precipitable water vapor using only 23.835 and 30.0 GHz(totalPrecipitableWater2)
- Microwave brightness temperature(brightnessTemperature)
- Frequency(frequency)
- Convective available potential energy(cape)
- Flag indicating moisture sensor status(wetWindowFlag)
- Expected root-mean-square error in liquid water content retrieval(liquidWaterContentRmsError)
- Lifting condensation level(liftingCondensationLevel)
- Level of free convection(levelFreeConvection)
- Temperature used to determine the backscatter profile(temperature)
- Surface absolute temperature at instrument(surfaceTemperature)
- Expected root-mean-square error in liquid water path retrieval using only 23.835
and 30.0 GHz(liquidWaterPath2RmsError) - Retrieved cloud liquid water content(liquidWaterContent)
- Time offset of tweaks from base_time(time_offset)
- Surface relative humidity at instrument(surfaceRelativeHumidity)
- Interpolated water vapor mixing ratio(waterVaporMixingRatio)
- Time offset from midnight of date of file. For CO data, this is identical to
time_offset and is included for compatibility.(time) - Equilibrium level(equilibriumLevel)
nsamwrprawC1.00: - Raw data stream - documentation not supported(raw)
|