Data Quality Reports for Session: 103732 User: turner Completed: 01/17/2007


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D050112.1NSA/C1 - Site-wide power failurensamplC1.a1, nsamwrpC1.b1, nsamplpsC1.a0, nsamwrlosC1.b1, nsamwrtipC1.a1, nsaaerich1C1.b1,
nsaaerich2C1.b1, nsammcrmomC1.b1, nsamettwr4hC1.b1, nsavceil25kC1.b1,
nsatwrcam40mC1.a1, nsaaerisummaryC1.b1, nsaaeriengineerC1.b1, nsa915rwptempconC1.a1,
nsa915rwptempmomC1.a0, nsa915rwpwindconC1.a1, nsa915rwpwindmomC1.a0, nsa915rwptempspecC1.a0,
nsa915rwpwindspecC1.a0
D050217.2NSA/AERI/C1 - Blower motor failurensaaeriC1.00, nsaaerich2C1.b1, nsaaerirawC1.00, nsaaerisummaryC1.b1, nsaaeriengineerC1.b1,
nsaaerilblcloudsC1.c1
D050224.3NSA/AERI/C1 - Blower Motor Failure -Channel 1 data effectnsaaeriC1.00, nsaaerirawC1.00, nsaaerisummaryC1.b1, nsaaeriengineerC1.b1,
nsaaerilblcloudsC1.c1
D060331.1NSA/AERI/C1 - Excessive Noise in C1 AERI datansaaerich1C1.b1, nsaaerisummaryC1.b1


DQRID : D050112.1
Start DateStart TimeEnd DateEnd Time
12/13/2004100012/13/20042330
Subject:
NSA/C1 - Site-wide power failure
DataStreams:nsamplC1.a1, nsamwrpC1.b1, nsamplpsC1.a0, nsamwrlosC1.b1, nsamwrtipC1.a1, nsaaerich1C1.b1,
nsaaerich2C1.b1, nsammcrmomC1.b1, nsamettwr4hC1.b1, nsavceil25kC1.b1,
nsatwrcam40mC1.a1, nsaaerisummaryC1.b1, nsaaeriengineerC1.b1, nsa915rwptempconC1.a1,
nsa915rwptempmomC1.a0, nsa915rwpwindconC1.a1, nsa915rwpwindmomC1.a0, nsa915rwptempspecC1.a0,
nsa915rwpwindspecC1.a0
Description:
The Barrow facility experienced a site-wide power failure on 12/13.  Power was restored to 
most instruments between 2250 and 2330 GMT.
Measurements:nsa915rwpwindconC1.a1:
  • Elevation angle of Beam 4 for WINDS data(elevation4)
  • Power offset(power)
  • Average Interval(avgint)
  • east longitude for all the input platforms.(lon)
  • Number of Values Required for Consensus, Beam 4(nrcns4)
  • Number of values that passed consensus, beam 2(ncns2)
  • Azimuth of Beam 2 for WINDS data(azimuth2)
  • Elevation angle of Beam 0 for WINDS data(elevation0)
  • Beam 1 radial wind speed(vel1)
  • Sample Rate(sampr)
  • Rx bandwidth switch code(bswitch)
  • Height Index(range_gate)
  • Signal to Noise Ratio, Beam 4(snr4)
  • Azimuth of Beam 4 for WINDS data(azimuth4)
  • Number of Values Required for Consensus, Beam 0(nrcns0)
  • Number of spectra/ave int, Beam 2(nrec2)
  • Signal to Noise Ratio, Beam 0(snr0)
  • Azimuth of Beam 0 for WINDS data(azimuth0)
  • Array of heights for each sample time(height_p)
  • Number of Values Required for Consensus, Beam 1(nrcns1)
  • Time offset of tweaks from base_time(time_offset)
  • altitude above sea levelaltunits(alt)
  • Azimuth of Beam 1 for WINDS data(azimuth1)
  • Number of valid heights for each power(nheight)
  • Oblique FFT Bandwidth(oband)
  • Elevation angle of Beam 1 for WINDS data(elevation1)
  • Number of Individual Spectra/Average Spectrum(nspc)
  • Beam 0 radial wind speed(vel0)
  • Oblique Velocity Spectral Resolution(ovsr)
  • Number of values that passed consensus, beam 1(ncns1)
  • Beam 4 radial wind speed(vel4)
  • copolar signal to noise ratio(snr1)
  • Number of Coherent Samples/spectral point(ncoh)
  • Number of spectra/ave int, Beam 1(nrec1)
  • Horizontal wind speed(spd)
  • Elevation angle of Beam 2 for WINDS data(elevation2)
  • model zonal wind velocity(u_wind)
  • Vertical Velocity Spectral Resolution(vvsr)
  • north latitude for all the input platforms.(lat)
  • Number of values that passed consensus, beam 0(ncns0)
  • model meridional wind velocity(v_wind)
  • Height of Center of First Range Gate(rgf)
  • Number of Values Required for Consensus, Beam 2(nrcns2)
  • Interpulse Period(ipp)
  • Number of spectra/ave int, Beam 0(nrec0)
  • Number of spectra/ave int, Beam 4(nrec4)
  • Beam 3 radial wind speed(vel3)
  • Number of Pulse Code Bits(pcbits)
  • Number of values that passed consensus, beam 4(ncns4)
  • Signal to Noise Ratio, Beam 2(snr2)
  • Elevation angle of Beam 3 for WINDS data(elevation3)
  • Range Gate Spacing(rgs)
  • Individual Spectrum Integration Time(sitime)
  • Time offset from base_time(base_time)
  • Height of Center of Last Range Gate(rgl)
  • Number of Values Required for Consensus, Beam 3(nrcns3)
  • Delay Time to 1st Gate(dly)
  • Time Domain Integration Time(tditime)
  • Vertical FFT Bandwidth(vband)
  • Pulse Repetition Frequency(prf)
  • Horizontal wind direction(dir)
  • Azimuth of Beam 3 for WINDS data(azimuth3)
  • Ave Time per Average Spectra. Also known as dwell.(spcavetim)
  • Number of values that passed consensus, beam 3(ncns3)
  • Beam 2 radial wind speed(vel2)
  • Pulse Length(plen)
  • Signal to Noise Ratio, Beam 3(snr3)
  • Number of spectra/ave int, Beam 3(nrec3)

nsatwrcam40mC1.a1:
  • JPG data stream - documentation not supported(JPEG data stream - documentation not yet available)

nsa915rwptempconC1.a1:
  • north latitude for all the input platforms.(lat)
  • altitude above sea levelaltunits(alt)
  • Number of Values Required for Consensus, Beam 0(nrcns)
  • Number of Values that Passed Consensus, Beam 0 Virtual Temperature(ncns_virtual_temp)
  • Corrected Beam 0 Virtual Temperature(virtual_temp_corr)
  • Time offset from base_time(base_time)
  • east longitude for all the input platforms.(lon)
  • Height of bins above ground level for the temperature, retrieved water vapor,
    and pressure profile(height)
  • Signal to Noise Ratio, Corrected Beam 0 Virtual Temperature(snr_virtual_temp_corr)
  • RASS virtual temperature (1st moment)(virtual_temp)
  • Number of Values that Passed Consensus, Corrected Beam 0 Virtual Temperature(ncns_virtual_temp_corr)
  • Number of Average Spectra/Average Int, Beam 0(nrec)
  • Sample Rate(sampr)
  • Vertical wind velocity(vert_v)
  • Signal to Noise Ratio, Vertical wind velocity(snr_vert_v)
  • Time offset of tweaks from base_time(time_offset)
  • Signal to Noise Ratio, Beam 0 Virtual Temperature(snr_virtual_temp)
  • Average Interval(avgint)
  • Range Gate Spacing(rgs)
  • Number of Values that Passed Consensus, Vertical wind velocity(ncns_vert_v)

nsa915rwpwindmomC1.a0:
  • Individual Spectrum Integration Time(sitime)
  • Time Domain Integration Time(tditime)
  • Oblique FFT Bandwidth(oband)
  • Vertical FFT Bandwidth(vband)
  • Signal to Noise Ratio of the RASS Signal(snr)
  • Number of valid heights for each power(nheight)
  • Radial Velocity Spectral Resolution(vsr)
  • Mean atmospheric vertical velocity(mdf)
  • Height of Center of Last Range Gate(rgl)
  • north latitude for all the input platforms.(lat)
  • Number of Pulse Code Bits(pcbits)
  • Beam Number(beam)
  • Time offset of tweaks from base_time(time_offset)
  • east longitude for all the input platforms.(lon)
  • Number of Coherent Samples/spectral point(ncoh)
  • Time offset from base_time(base_time)
  • Number of Individual Spectra/Average Spectrum(nspc)
  • Elevation angle of Beam 0(elevation)
  • Rx bandwidth switch code(bswitch)
  • Sample Rate(sampr)
  • Delay Time to 1st Gate(dly)
  • Range Gate Spacing(rgs)
  • Array of heights for each sample time(height_t)
  • 1000 * log10(noise signal level: vert vel)(noise)
  • Pulse Repetition Frequency(prf)
  • Spectral Width: vert velocity(specw)
  • Height Index(range_gate)
  • Pulse Length(plen)
  • altitude above sea levelaltunits(alt)
  • Ave Time per Average Spectra. Also known as dwell.(spcavetime)
  • Height of Center of First Range Gate(rgf)
  • Interpulse Period(ipp)

nsamplC1.a1:
  • Repetition rate, or Trigger Frequency of the laser(trigger_freq)
  • Time offset from base_time(base_time)
  • Amount of time the actual laser pulse lags behind the sync trigger(laser_sync_offset)
  • Distance from leading edge of first range bin to the center of each bin.(range_bins)
  • effective range offset due to poor sync between laser firing and A/D trigger.(range_offset)
  • Preliminary cloud base height above ground level(preliminary_cbh)
  • Laser temperature(laser_temp)
  • Time offset from midnight of date of file. For CO data, this is identical to
    time_offset and is included for compatibility.(time)
  • east longitude for all the input platforms.(lon)
  • Angle of orientation with respect to true geographic north(transceiver_azimuth_angle)
  • Number of laser pulses summed during measurement interval(shots_summed)
  • Background signal(background_signal)
  • value represents date when configuration is first applicable as YYYYMMDD(property)
  • Repetition rate, or Trigger Frequency of the laser(pulse_rep)
  • Detector temperature(detector_temp)
  • altitude above sea levelaltunits(alt)
  • Amount of time the scalar lags behind the sync trigger(scalar_sync_offset)
  • Voltage level which operates the thermistor(voltage_10)
  • Number of laser pulses summed during measurement interval(shots_sum)
  • Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
  • Filter temperature(filter_temp)
  • Width of range-bins calculated from range_bin_time(range_bin_width)
  • Voltage level which operates the A/D card and the detector(voltage_05)
  • distance to center of range bin after correcting for offset in sync(range)
  • Maximum altitude retrieved from multichannel scalar card.(max_altitude)
  • Energy output per pulse of transmitted laser beam at 523 nm (Doubled Nd-YLF)(energy_monitor)
  • Height of bins above ground level for the temperature, retrieved water vapor,
    and pressure profile(height)
  • Voltage level which operates the energy monitor(voltage_15)
  • Instrument temperature(instrument_temp)
  • Angle of inclination with respect to horizontal(transceiver_altitude_angle)
  • required to correct raw counts for detector deadtime prior to all other
    corrections.(deadtime_correction)
  • Sum of raw backscatter counts per bin prior to ANY corrections.(total_counts)
  • Time offset of tweaks from base_time(time_offset)
  • Amount of time laser pulse lags behind the scalar trigger(laser_scalar_sync_offset)
  • north latitude for all the input platforms.(lat)
  • Aerosol volume backscattering coefficient at 355 nm(backscatter)

nsamplpsC1.a0:
  • Filter temperature(filter_temp)
  • Time offset from midnight of date of file. For CO data, this is identical to
    time_offset and is included for compatibility.(time)
  • Energy output per pulse of transmitted laser beam at 523 nm (Doubled Nd-YLF)(energy_monitor)
  • Laser temperature(laser_temp)
  • distance to center of range bin after correcting for offset in sync(range)
  • Background signal(background_signal)
  • Height of bins above ground level for the temperature, retrieved water vapor,
    and pressure profile(height)
  • Preliminary cloud base height above ground level(preliminary_cbh)
  • Maximum altitude retrieved from multichannel scalar card.(max_altitude)
  • Time offset from base_time(base_time)
  • Instrument temperature(instrument_temp)
  • Voltage level which operates the A/D card and the detector(voltage_05)
  • effective range offset due to poor sync between laser firing and A/D trigger.(range_offset)
  • Time offset of tweaks from base_time(time_offset)
  • east longitude for all the input platforms.(lon)
  • Voltage level which operates the energy monitor(voltage_15)
  • Attenuated backscatter(detector_counts)
  • Voltage level which operates the thermistor(voltage_10)
  • north latitude for all the input platforms.(lat)
  • Detector temperature(detector_temp)
  • Number of laser pulses summed during measurement interval(shots_summed)
  • Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
  • Repetition rate, or Trigger Frequency of the laser(pulse_rep)
  • Width of range-bins calculated from range_bin_time(range_bin_width)
  • altitude above sea levelaltunits(alt)
  • Distance from leading edge of first range bin to the center of each bin.(range_bins)

nsamwrpC1.b1:
  • Expected root-mean-square error in precipitable water retrieval using only
    23.835 and 30.0 GHz(totalPrecipitableWater2RmsError)
  • Flag indicating moisture sensor status(wetWindowFlag)
  • Retrieved cloud liquid water content(liquidWaterContent)
  • altitude above sea levelaltunits(alt)
  • Cloud-base height, from Micropulse LIDAR or Belfort LIDAR ceilometer(cloudBaseHeight)
  • Expected root-mean-square error in liquid water path retrieval using only 23.835
    and 30.0 GHz(liquidWaterPath2RmsError)
  • Expected root-mean-square error in temperature retrieval(temperatureRmsError)
  • Retrieved liquid water path using only 23.835 and 30.0 GHz(liquidWaterPath2)
  • Surface absolute temperature at instrument(surfaceTemperature)
  • Surface water vapor density at instrument(surfaceWaterVaporDensity)
  • Lifting condensation level(liftingCondensationLevel)
  • Interpolated dewpoint temperature(dewpointTemperature)
  • Retrieved liquid water path(liquidWaterPath)
  • Equilibrium level pressure(equilibriumLevelPres)
  • Lifting condensation level pressure(liftingCondensationLevelPres)
  • east longitude for all the input platforms.(lon)
  • Retrieved total precipitable water vapor using only 23.835 and 30.0 GHz(totalPrecipitableWater2)
  • Temperature used to determine the backscatter profile(temperature)
  • Expected root-mean-square error in water vapor density retrieval(waterVaporDensityRmsError)
  • Retrieved water vapor density(waterVaporDensity)
  • Time offset from midnight of date of file. For CO data, this is identical to
    time_offset and is included for compatibility.(time)
  • Expected root-mean-square error in liquid water path retrieval(liquidWaterPathRmsError)
  • Level of free convection pressure(levelFreeConvectionPres)
  • Microwave brightness temperature(brightnessTemperature)
  • Data quality flags(dataQualityFlags)
  • Internal blackbody reference temperature(blackbodyTemperature)
  • atmospheric pressure at mean sea level and at tropopause (NGM250 predicted)(pressure)
  • Derived virtual temperature(virtualTemperature)
  • Zenith-pointing infrared temperature at 10um(infraredTemperature)
  • Retrieved total precipitable water vapor(totalPrecipitableWater)
  • Frequency(frequency)
  • Time offset from base_time(base_time)
  • Expected root-mean-square error in precipitable water retrieval(totalPrecipitableWaterRmsError)
  • north latitude for all the input platforms.(lat)
  • Convective available potential energy(cape)
  • Expected root-mean-square error in liquid water content retrieval(liquidWaterContentRmsError)
  • Level of free convection(levelFreeConvection)
  • Surface pressure at instrument(surfacePressure)
  • Height of bins above ground level for the temperature, retrieved water vapor,
    and pressure profile(height)
  • Surface relative humidity at instrument(surfaceRelativeHumidity)
  • Elevation angle of Beam 0(elevation)
  • Time offset of tweaks from base_time(time_offset)
  • Derived relative humidity(relativeHumidity)
  • Solar azimuth referenced to the Central Facility.(azimuth)
  • Equilibrium level(equilibriumLevel)
  • Interpolated water vapor mixing ratio(waterVaporMixingRatio)

nsa915rwptempspecC1.a0:
  • Time offset of tweaks from base_time(time_offset)
  • Spectral Data (signal strength/freq int)(spc_amp)
  • altitude above sea levelaltunits(alt)
  • east longitude for all the input platforms.(lon)
  • Time offset from base_time(base_time)
  • Sample Rate(sampr)
  • Range Gate Spacing(rgs)
  • Height of bins above ground level for the temperature, retrieved water vapor,
    and pressure profile(height)
  • north latitude for all the input platforms.(lat)
  • Particle radius at logarithmic center of bin(bins)

nsa915rwptempmomC1.a0:
  • Mean acoustic speed(smdf)
  • altitude above sea levelaltunits(alt)
  • east longitude for all the input platforms.(lon)
  • Time offset from base_time(base_time)
  • RASS virtual temperature (1st moment)(virtual_temp)
  • Signal to Noise Ratio: acoustic(ssnr)
  • Spectral Width: vert velocity(specw)
  • Mean atmospheric vertical velocity(mdf)
  • Sample Rate(sampr)
  • Range Gate Spacing(rgs)
  • Signal to Noise Ratio of the RASS Signal(snr)
  • Height of bins above ground level for the temperature, retrieved water vapor,
    and pressure profile(height)
  • 1000 * log10(noise signal level: vert vel)(noise)
  • north latitude for all the input platforms.(lat)
  • Acoustic Spectral Width(sspecw)
  • Time offset of tweaks from base_time(time_offset)

nsamettwr4hC1.b1:
  • 40m Average QLI Reference Temperature(RefT40M_AVG)
  • Standard Deviation of 10m Calculated Vapor Pressure(VP10M_STD)
  • 15 minute Present Weather Code(PwCod15mi)
  • Chilled Mirror Calculated Vapor Pressure(VPCMH)
  • Chilled Mirror Temperature(CMHTemp)
  • Standard Deviation of 40m Calculated Dew Point(DP40M_STD)
  • 2m Arithmetic Mean Wind Speed(WS2M_S_WVT)
  • 10m Vector Averaged Wind Speed(WS10M_U_WVT)
  • east longitude for all the input platforms.(lon)
  • north latitude for all the input platforms.(lat)
  • 10m Arithmetic Mean Wind Speed(WS10M_S_WVT)
  • 2m Average QLI Input Voltage(Volt2M_AVG)
  • 2m Vector Averaged Wind Direction(WD2M_DU_WVT)
  • 10m Average Relative Humidity(RH10M_AVG)
  • Present Weather Sensor Alarm(PWSAlarm)
  • altitude above sea levelaltunits(alt)
  • 20m Average Relative Humidity(RH20M_AVG)
  • 10m Average Calculated Vapor Pressure(VP10M_AVG)
  • 1 minute Average Visibility(AvgVis1mi)
  • Standard Deviation of Sonic Vector Averaged Wind Direction(SonicWD_SDU_WVT)
  • 10m Average Temperature(T10M_AVG)
  • Instant Present Weather Code(InstPwCod)
  • Standard Deviation of 2m Relative Humidity(RH2M_STD)
  • Standard Deviation of 10m Relative Humidity(RH10M_STD)
  • Standard Deviation of 10m Temperature(T10M_STD)
  • 40m Average Calculated Dew Point(DP40M_AVG)
  • Standard Deviation of 2m Calculated Vapor Pressure(VP2M_STD)
  • 1 hour Present Weather Code(PwCod1hr)
  • Standard Deviation of 20m Relative Humidity(RH20M_STD)
  • 40m Vector Averaged Wind Speed(WS40M_U_WVT)
  • 10m Average Calculated Dew Point(DP10M_AVG)
  • 20m Arithmetic Mean Wind Speed(WS20M_S_WVT)
  • Standard Deviation of 20m Vector Averaged Wind Direction(WD20M_SDU_WVT)
  • 2m Average Temperature(T2M_AVG)
  • 2m Average Calculated Dew Point(DP2M_AVG)
  • Cumulative Snow Sum(CumSnow)
  • 20m Vector Averaged Wind Direction(WD20M_DU_WVT)
  • 20m Average Calculated Dew Point(DP20M_AVG)
  • Average X Component of Sonic Wind Speed(SonicX_AVG)
  • 20m Average QLI Reference Temperature(RefT20M_AVG)
  • Sonic Vector Averaged Wind Direction(SonicWD_DU_WVT)
  • Standard Deviation of 2m Temperature(T2M_STD)
  • Time offset from base_time(base_time)
  • Standard Deviation of 10m Vector Averaged Wind Direction(WD10M_SDU_WVT)
  • 10 minute Average Visibility(AvgVis10m)
  • 2m Average Relative Humidity(RH2M_AVG)
  • Standard Deviation of 10m Calculated Dew Point(DP10M_STD)
  • Standard Deviation of 2m Vector Averaged Wind Direction(WD2M_SDU_WVT)
  • 10m Average QLI Input Voltage(Volt10M_AVG)
  • 20m Average Temperature(T20M_AVG)
  • 40m Vector Averaged Wind Direction(WD40M_DU_WVT)
  • Standard Deviation of 2m Calculated Dew Point(DP2M_STD)
  • Cumulative Water Sum(CumH2O)
  • 10m Average QLI Reference Temperature(RefT10m_AVG)
  • 40m Average Relative Humidity(RH40M_AVG)
  • 40m Arithmetic Mean Wind Speed(WS40M_S_WVT)
  • 40m Average Temperature(T40M_AVG)
  • Precipitation Rate(PcpRate)
  • 10m Vector Averaged Wind Direction(WD10M_DU_WVT)
  • Sonic Arithmetic Mean Wind Speed(SonicWS_S_WVT)
  • 2m Average Calculated Vapor Pressure(VP2M_AVG)
  • Average Y Component of Sonic Wind Speed(SonicY_AVG)
  • Sonic Vector Averaged Wind Speed(SonicWS_U_WVT)
  • Standard Deviation of 40m Temperature(T40M_STD)
  • 20m Average Calculated Vapor Pressure(VP20M_AVG)
  • 2m Vector Averaged Wind Speed(WS2M_U_WVT)
  • Time offset of tweaks from base_time(time_offset)
  • Time offset from midnight of date of file. For CO data, this is identical to
    time_offset and is included for compatibility.(time)
  • 2m Average QLI Reference Temperature(RefT2M_AVG)
  • Average Sonic Static Speed of Sound(SonicS_AVG)
  • Chilled Mirror Calculated Saturation Vapor Pressure(SatVPCMH)
  • Standard Deviation of 20m Calculated Vapor Pressure(VP20M_STD)
  • Standard Deviation of 40m Relative Humidity(RH40M_STD)
  • 20m Average QLI Input Voltage(Volt20M_AVG)
  • Standard Deviation of 40m Vector Averaged Wind Direction(WD40M_SDU_WVT)
  • Datalogger Battery Voltage(Batt_Volt)
  • Standard Deviation of 20m Calculated Dew Point(DP20M_STD)
  • 40m Average QLI Reference Voltage(Volt40M_AVG)
  • Chilled Mirror Dew Point(CMHDP)
  • 20m Vector Averaged Wind Speed(WS20M_U_WVT)
  • 40m Average Calculated Vapor Pressure(VP40M_AVG)
  • Standard Deviation of 20m Temperature(T20M_STD)
  • Standard Deviation of 40m Calculated Vapor Pressure(VP40M_STD)
  • Chilled Mirror Calculated Relative Humidity(CMHRH)
  • Atmospheric Pressure(AtmPress)

nsaaeriengineerC1.b1:
  • Imaginary radiance during sky view averaged over (700_705 cm-1)(skyViewImaginaryRadiance700_705)
  • Weight factor for top used in calculating ambient blackbody temperature average(ABBtopTempWeight)
  • Hot blackbody temperature - apex(HBBapexTemp)
  • Interferometer window temperature measured on the outside of the aluminum window
    flange(interferometerWindowTemp)
  • Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
  • Shortwave window brightness temperature from radiance average (2510_2515 cm^-1)(shortwaveWindowAirTemp2510_2515)
  • Coadditions count Number of complete(forward+backward) interferogram scans in a
    sample average.(coadditionsCount)
  • Imaginary radiance during sky view averaged over (2282_2287 cm-1)(skyViewImaginaryRadiance2282_2287)
  • Characteristic value representing overall longwave channel responsivity(LWresponsivity)
  • Motor step value given to motor controller to achieve proper mirror positioning(sceneMirrorMotorStep)
  • Radiance standard deviation during sky view averaged over (985_990 cm^-1)(skyViewStdDevRadiance985_990)
  • Ambient air temperature at hatch opening(outsideAirTemp)
  • Hot blackbody temperature - rim top(HBBtopTemp)
  • Hatch status indicator, boolean with negative error conditions: 1:Open 0:Closed
    -1:Fault -2:Outside Valid Range -3:Neither Open Nor Closed(hatchOpen)
  • Version number of Operational Software(systemReleaseNumber)
  • Weight factor for bottom used in calculating ambient blackbody temperature
    average(ABBbottomTempWeight)
  • Imaginary radiance during sky view averaged over (2295_2300 cm-1)(skyViewImaginaryRadiance2295_2300)
  • Radiance standard deviation during ambient blackbody view averaged over (700_705
    cm-1)(ABBviewStdDevRadiance700_705)
  • Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
  • Corrective offset for final hot blackbody average temperature(HBBtempOffset)
  • Weight factor for top used in calculating hot blackbody temperature average(HBBtopTempWeight)
  • Radiance standard deviation during ambient blackbody view averaged over (985_990
    cm-1)(ABBviewStdDevRadiance985_990)
  • Logical flag indicating whether HBB temperature is stable (true) or not stable
    (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
  • Duration of scene view(sceneViewDuration)
  • Ambient temperature used in calibration(calibrationAmbientTemp)
  • Ambient air temperature near the interferometer(airNearInterferometerTemp)
  • Scene mirror temperature as measured at the center of the back of the mirror(sceneMirrorTemp)
  • Resistive temperature of 2500 Ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
  • Longwave window radiance average (985_990 cm^-1)(longwaveWindowRadiance985_990)
  • The noise equivalent radiance observed in the longwave channel during a sky view
    at 1000 cm^-1(LWskyNEN)
  • Rain sensor analog output: the rain sensor is located inside the hatch near the
    sky aperture and is used to flag the critical condition of rain falling on
    the AERI s(rainSensorIntensity)
  • Imaginary radiance during sky view averaged over (2510_2515 cm-1)(skyViewImaginaryRadiance2510_2515)
  • Shortwave radiance average (2295_2300 cm^-1) Surface Air(surfaceLayerRadiance2295_2300)
  • Shortwave radiance average (2282_2287 cm^-1) Elevated Air(elevatedLayerRadiance2282_2287)
  • Scene Mirror Position Count Number of viewers in a sequence(sceneMirPosCount)
  • Noise-equivalent Radiance in Hot Blackbody at 1000 cm-1(LW_HBB_NEN)
  • Temperature of the AERI blackbody support structure(BBsupportStructureTemp)
  • Maximum departure from ideal of the mirror position over the course of all
    contributing views. Typically two hot, two ambient, and one scene view are
    examine(sceneMirPosEncoderMaxDrift)
  • Longwave elevated air brightness temperature from radiance average (700_705
    cm^-1)(elevatedLayerAirTemp700_705)
  • Observation longitude(Longitude)
  • Radiance standard deviation during hot blackbody view averaged over (700_705
    cm-1)(HBBviewStdDevRadiance700_705)
  • Laser wavenumber used in definition of output wavenumber scale(outputLaserWavenumber)
  • Imaginary radiance during sky view averaged over (675_680 cm-1)(skyViewImaginaryRadiance675_680)
  • Longwave window brightness temperature from radiance average (985_990 cm^-1)(longwaveWindowAirTemp985_990)
  • Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
  • Sun sensor analog output: The sun sensor has a view angle to the sky slightly
    larger than the interferometer FOV and is aligned to the interferometer
    line-of-sight. I(sunSensorIntensity)
  • Detector temperature sensed via diode near detector(detectorTemp)
  • Radiance standard deviation during ambient blackbody view averaged over
    (2295_2300 cm-1)(ABBviewStdDevRadiance2295_2300)
  • Radiance standard deviation during sky view averaged over (2510_2515 cm^-1)(skyViewStdDevRadiance2510_2515)
  • Maximum Temperature Difference Between ABB Thermistors(ABBmaxTempDiff)
  • Interferometer front end fan airflow unheated temperature: used with heated
    temperature as measure of airflow.(frontEndFanAirUnheatedTemp)
  • Relative humidity measured near Blackbodies. Use with Air Temperature Near BBs
    only.(atmosphericRelativeHumidity)
  • Limit applied to LWskyNEN in determination of LWskyNENacceptable(LWskyNENlimit)
  • Scene mirror motor driver heat sink temperature(motorDriverTemp)
  • Radiance standard deviation during hot blackbody view averaged over (675_680
    cm-1)(HBBviewStdDevRadiance675_680)
  • Shortwave surface air brightness temperature from radiance average (2295_2300
    cm^-1)(surfaceLayerAirTemp2295_2300)
  • Longwave radiance average (675-680 cm^-1) Surface Air(surfaceLayerRadiance675_680)
  • Factor used to convert single-scan noise to two-minute equivalent(twoMinuteNoiseEstimateFactor)
  • Observation date(dateYYMMDD)
  • Radiance standard deviation during sky view averaged over (700_705 cm^-1)(skyViewStdDevRadiance700_705)
  • Blackbody controller Unit 2 power supply temperature(BBcontroller2temp)
  • Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
  • Size of buffer holding initial spectrum(originalInterferogramSize)
  • Time at center of AERI sky observation period(timeHHMMSS)
  • Longwave radiance average (700_705 cm^-1) Elevated Air(elevatedLayerRadiance700_705)
  • Radiance standard deviation during ambient blackbody view averaged over
    (2510_2515 cm-1)(ABBviewStdDevRadiance2510_2515)
  • Size of buffer holding expanded spectrum before interpolation(expandedInterferogramSize)
  • Radiance standard deviation during ambient blackbody view averaged over
    (2282_2287 cm-1)(ABBviewStdDevRadiance2282_2287)
  • Weight factor for apex used in calculating hot blackbody temperature average(HBBapexTempWeight)
  • Original laser wavenumber assumed for this instrument(originalLaserWavenumber)
  • Signal conditioning electronics inside air temperature(SCEtemp)
  • The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
    centered on the sky view(HBBtempDrift)
  • Limit applied to HBBtempDrift in determination of HBBstable flag(HBBtempDriftLimit)
  • Radiance standard deviation during sky view averaged over (2295_2300 cm^-1)(skyViewStdDevRadiance2295_2300)
  • Scene mirror motor case temperature(mirrorMotorTemp)
  • The noise equivalent radiance observed in the shortwave channel during a sky
    view at 2500 cm^-1(SWskyNEN)
  • Logical flag indicating whether longwave channel noise equivalent radiance is
    acceptable in sky view (true/false). Determined using LWskyNEN and
    LWskyNENlimit.(LWskyNENacceptable)
  • Cold blackbody temperature used in calibration(calibrationCBBtemp)
  • Shortwave elevated air brightness temperature from radiance average (2282_2287
    cm^-1)(elevatedLayerAirTemp2282_2287)
  • Character string containing instrument name(instrumentUnitNumber)
  • Time at center of AERI sky observation period(Time_UTC_hours)
  • Spare temperature sensor (location TBD)(spareTemp)
  • Radiance standard deviation during sky view averaged over (2282_2287 cm^-1)(skyViewStdDevRadiance2282_2287)
  • Radiance standard deviation during hot blackbody view averaged over (2510_2515
    cm-1)(HBBviewStdDevRadiance2510_2515)
  • Field of view half angle used in finite FOV correction(FFOVhalfAngle)
  • Julian Day including day and fraction of day(JulianDay)
  • Radiance standard deviation during hot blackbody view averaged over (2282_2287
    cm-1)(HBBviewStdDevRadiance2282_2287)
  • Stirling cycle cooler expander temperature(coolerExpanderTemp)
  • Ambient air temperature near blackbodies(airNearBBsTemp)
  • Logical flag indicating whether shortwave channel noise equivalent radiance is
    acceptable in sky view (true/false). Determined using SWskyNEN and
    SWskyNENlimit.(SWskyNENacceptable)
  • Blackbody controller Unit 1 power supply temperature(BBcontroller1temp)
  • Observation atmospheric pressure in AERI electronics(atmosphericPressure)
  • north latitude for all the input platforms.(lat)
  • Interferometer front end fan airflow heated temperature: used with unheated
    temperature as measure of airflow.(frontEndFanAirHeatedTemp)
  • Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
  • Difference between frontEndFanAirHeatedTemp and frontEndFanAirUnheatedTemp
    indicative of front end air flow.(frontEndFanAirTempDiff)
  • Weight factor for apex used in calculating ambient blackbody temperature average(ABBapexTempWeight)
  • Scene mirror view angle in non-negative degrees, measured clockwise looking into
    interferometer window.(sceneMirrorAngle)
  • Hot blackbody temperature - rim bottom(HBBbottomTemp)
  • Relative Humidity measured in the Interferometer Enclosure(interferometerEnclosureRelativeHumidity)
  • Observation Altitude(Altitude)
  • Blackbody cavity geometry factor(BBcavityFactor)
  • Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
  • AERI instrument data channel number(channelNumber)
  • AERI instrument unit serial number(AERIunitNumber)
  • Time offset from midnight of date of file. For CO data, this is identical to
    time_offset and is included for compatibility.(time)
  • Noise-equivalent Radiance in Hot Blackbody at 2500 cm-1(SW_HBB_NEN)
  • Electronics rack ambient temperature measured at inside top of rack(rackAmbientTemp)
  • Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
  • Difference between actual and ideal motor encoder values for current view
    indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift)
  • east longitude for all the input platforms.(lon)
  • Radiance standard deviation during ambient blackbody view averaged over (675_680
    cm-1)(ABBviewStdDevRadiance675_680)
  • AERI interferometer temperature at second port(interferometerSecondPortTemp)
  • Limit applied to SWskyNEN in determination of SWskyNENacceptable(SWskyNENlimit)
  • Imaginary radiance during sky view averaged over (985_990 cm-1)(skyViewImaginaryRadiance985_990)
  • Logical flag indicating whether any data is available at current time
    (true/false)(dataAvailable)
  • Time offset from base_time(base_time)
  • altitude above sea levelaltunits(alt)
  • Radiance standard deviation during sky view averaged over (675_680 cm^-1)(skyViewStdDevRadiance675_680)
  • Maximum Temperature Difference Between HBB Thermistors(HBBmaxTempDiff)
  • Number of terms used in finite field of view correction(numberOfTerms)
  • Ambient blackbody temperature(ABBbottomTemp)
  • Hot blackbody temperature used in calibration(calibrationHBBtemp)
  • Weight factor for bottom used in calculating hot blackbody temperature average(HBBbottomTempWeight)
  • Longwave surface air brightness temperature from radiance average (675_680
    cm^-1)(surfaceLayerAirTemp675_680)
  • Shortwave window radiance average (2510_2515 cm^-1)(shortwaveWindowRadiance2510_2515)
  • Corrective offset for final ambient blackbody average temperature(ABBtempOffset)
  • Scene mirror position encoder value(sceneMirPosEncoder)
  • Time offset of tweaks from base_time(time_offset)
  • Ambient blackbody temperature - apex(ABBapexTemp)
  • Radiance standard deviation during hot blackbody view averaged over (2295_2300
    cm-1)(HBBviewStdDevRadiance2295_2300)
  • Observation latitude(Latitude)
  • Ambient blackbody temperature - rim top(ABBtopTemp)
  • Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
  • Stirling cycle cooler current(coolerCurrent)
  • Radiance standard deviation during hot blackbody view averaged over (985_990
    cm-1)(HBBviewStdDevRadiance985_990)
  • Instrument scene mirror position identifier(sceneMirrorPosition)
  • AERI ingest computer temperature measured at back panel of computer(computerTemp)
  • Relative humidity measured in the optics compartment atop the interferometer.(opticsCompartmentRelativeHumidity)

nsaaerich2C1.b1:
  • north latitude for all the input platforms.(lat)
  • Relative humidity measured near Blackbodies. Use with Air Temperature Near BBs
    only.(atmosphericRelativeHumidity)
  • Maximum departure from ideal of the mirror position over the course of all
    contributing views. Typically two hot, two ambient, and one scene view are
    examine(sceneMirPosEncoderMaxDrift)
  • Scene mirror view angle in non-negative degrees, measured clockwise looking into
    interferometer window.(sceneMirrorAngle)
  • Julian Day including day and fraction of day(JulianDay)
  • wavenumbers for standard deviation of radiance spectra(wnum2)
  • east longitude for all the input platforms.(lon)
  • Cold blackbody temperature used in calibration(calibrationCBBtemp)
  • AERI instrument unit serial number(AERIunitNumber)
  • Observation latitude(Latitude)
  • Character string containing instrument name(instrumentUnitNumber)
  • Time at center of AERI sky observation period(Time_UTC_hours)
  • Version number of Operational Software(systemReleaseNumber)
  • Difference between the sky view\'s radiance variance and the hot black body
    view\'s variance(standard_dev_mean_rad)
  • Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
  • Hatch status indicator, boolean with negative error conditions: 1:Open 0:Closed
    -1:Fault -2:Outside Valid Range -3:Neither Open Nor Closed(hatchOpen)
  • Hot blackbody temperature used in calibration(calibrationHBBtemp)
  • Time offset of tweaks from base_time(time_offset)
  • Time offset from base_time(base_time)
  • Ambient temperature used in calibration(calibrationAmbientTemp)
  • AERI instrument data channel number(channelNumber)
  • Observation Altitude(Altitude)
  • Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
  • wavenumbers for mean radiance spectra(wnum)
  • Ambient air temperature at hatch opening(outsideAirTemp)
  • Time at center of AERI sky observation period(timeHHMMSS)
  • altitude above sea levelaltunits(alt)
  • Temperature of the AERI blackbody support structure(BBsupportStructureTemp)
  • Time offset from midnight of date of file. For CO data, this is identical to
    time_offset and is included for compatibility.(time)
  • Downwelling radiance interpolated to standard wavenumber scale(mean_rad)
  • Duration of scene view(sceneViewDuration)
  • Observation longitude(Longitude)
  • Observation atmospheric pressure in AERI electronics(atmosphericPressure)
  • Observation date(dateYYMMDD)

nsaaerisummaryC1.b1:
  • AERI LW Responsivity Spectral Averages (Ch1)(ResponsivitySpectralAveragesCh1)
  • Time at center of AERI sky observation period(timeHHMMSS)
  • Longwave window brightness temperature from radiance average (985_990 cm^-1)(longwaveWindowAirTemp985_990)
  • Shortwave surface air brightness temperature from radiance average (2295_2300
    cm^-1)(surfaceLayerAirTemp2295_2300)
  • AERI SW Scene NESR Spectral Averages (Ch2)(SkyNENCh2)
  • Averaged Wave number in inverse centimeters(wnumsum3)
  • Longwave elevated air brightness temperature from radiance average (700_705
    cm^-1)(elevatedLayerAirTemp700_705)
  • Logical flag indicating whether longwave channel noise equivalent radiance is
    acceptable in sky view (true/false). Determined using LWskyNEN and
    LWskyNENlimit.(LWskyNENacceptable)
  • Characteristic value representing overall longwave channel responsivity(LWresponsivity)
  • Time offset of tweaks from base_time(time_offset)
  • AERI LW Scene Brightness Temp Spectral Averages (Ch1)(SkyBrightnessTempSpectralAveragesCh1)
  • Longwave radiance average (700_705 cm^-1) Elevated Air(elevatedLayerRadiance700_705)
  • north latitude for all the input platforms.(lat)
  • Averaged Wave number in inverse centimeters(wnumsum7)
  • Difference between actual and ideal motor encoder values for current view
    indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift)
  • Maximum Temperature Difference Between HBB Thermistors(HBBmaxTempDiff)
  • Averaged Wave number in inverse centimeters(wnumsum6)
  • Cold blackbody temperature used in calibration(calibrationCBBtemp)
  • The noise equivalent radiance observed in the longwave channel during a sky view
    at 1000 cm^-1(LWskyNEN)
  • Averaged Wave number in inverse centimeters(wnumsum13)
  • Radiance standard deviation during sky view averaged over (675_680 cm^-1)(skyViewStdDevRadiance675_680)
  • Observation longitude(Longitude)
  • Logical flag indicating whether any data is available at current time
    (true/false)(dataAvailable)
  • AERI LW Scene NESR Spectral Averages (Ch1)(SkyNENCh1)
  • Radiance standard deviation during sky view averaged over (2282_2287 cm^-1)(skyViewStdDevRadiance2282_2287)
  • Averaged Wave number in inverse centimeters(wnumsum2)
  • Observation latitude(Latitude)
  • Longwave window radiance average (985_990 cm^-1)(longwaveWindowRadiance985_990)
  • Shortwave radiance average (2295_2300 cm^-1) Surface Air(surfaceLayerRadiance2295_2300)
  • AERI SW Scene Radiance Spectral Averages (Ch2)(SkyRadianceSpectralAveragesCh2)
  • Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
  • Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
  • Longwave radiance average (675-680 cm^-1) Surface Air(surfaceLayerRadiance675_680)
  • AERI SW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch2)(HBB2minNENestimateNo1Ch2)
  • Noise-equivalent Radiance in Hot Blackbody at 2500 cm-1(SW_HBB_NEN)
  • Rain sensor analog output: the rain sensor is located inside the hatch near the
    sky aperture and is used to flag the critical condition of rain falling on
    the AERI s(rainSensorIntensity)
  • Averaged Wave number in inverse centimeters(wnumsum12)
  • Time offset from midnight of date of file. For CO data, this is identical to
    time_offset and is included for compatibility.(time)
  • Averaged Wave number in inverse centimeters(wnumsum1)
  • Shortwave window radiance average (2510_2515 cm^-1)(shortwaveWindowRadiance2510_2515)
  • Radiance standard deviation during sky view averaged over (985_990 cm^-1)(skyViewStdDevRadiance985_990)
  • AERI instrument data channel number(channelNumber)
  • Averaged Wave number in inverse centimeters(wnumsum9)
  • Ambient air temperature at hatch opening(outsideAirTemp)
  • The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
    centered on the sky view(HBBtempDrift)
  • Relative humidity measured near Blackbodies. Use with Air Temperature Near BBs
    only.(atmosphericRelativeHumidity)
  • Scene mirror view angle in non-negative degrees, measured clockwise looking into
    interferometer window.(sceneMirrorAngle)
  • Shortwave elevated air brightness temperature from radiance average (2282_2287
    cm^-1)(elevatedLayerAirTemp2282_2287)
  • Julian Day including day and fraction of day(JulianDay)
  • Radiance standard deviation during sky view averaged over (700_705 cm^-1)(skyViewStdDevRadiance700_705)
  • AERI LW Scene Variability Spectral Averages (Ch1)(SkyUniformityCh1)
  • Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
  • Difference between frontEndFanAirHeatedTemp and frontEndFanAirUnheatedTemp
    indicative of front end air flow.(frontEndFanAirTempDiff)
  • Hot blackbody temperature used in calibration(calibrationHBBtemp)
  • Ambient temperature used in calibration(calibrationAmbientTemp)
  • Time offset from base_time(base_time)
  • Longwave surface air brightness temperature from radiance average (675_680
    cm^-1)(surfaceLayerAirTemp675_680)
  • Averaged Wave number in inverse centimeters(wnumsum5)
  • AERI SW Scene Variability Spectral Averages (Ch2)(SkyUniformityCh2)
  • AERI LW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch1)(HBB2minNENestimateNo1Ch1)
  • AERI SW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch2)(HBB2minNENestimateNo2Ch2)
  • Logical flag indicating whether HBB temperature is stable (true) or not stable
    (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
  • AERI instrument unit serial number(AERIunitNumber)
  • Observation atmospheric pressure in AERI electronics(atmosphericPressure)
  • Radiance standard deviation during sky view averaged over (2510_2515 cm^-1)(skyViewStdDevRadiance2510_2515)
  • Noise-equivalent Radiance in Hot Blackbody at 1000 cm-1(LW_HBB_NEN)
  • Observation date(dateYYMMDD)
  • Sun sensor analog output: The sun sensor has a view angle to the sky slightly
    larger than the interferometer FOV and is aligned to the interferometer
    line-of-sight. I(sunSensorIntensity)
  • Version number of Operational Software(systemReleaseNumber)
  • Logical flag indicating whether shortwave channel noise equivalent radiance is
    acceptable in sky view (true/false). Determined using SWskyNEN and
    SWskyNENlimit.(SWskyNENacceptable)
  • Maximum departure from ideal of the mirror position over the course of all
    contributing views. Typically two hot, two ambient, and one scene view are
    examine(sceneMirPosEncoderMaxDrift)
  • AERI LW Scene Radiance Spectral Averages (Ch1)(SkyRadianceSpectralAveragesCh1)
  • Averaged Wave number in inverse centimeters(wnumsum11)
  • The noise equivalent radiance observed in the shortwave channel during a sky
    view at 2500 cm^-1(SWskyNEN)
  • east longitude for all the input platforms.(lon)
  • Observation Altitude(Altitude)
  • AERI SW Responsivity Spectral Averages (Ch2)(ResponsivitySpectralAveragesCh2)
  • Maximum Temperature Difference Between ABB Thermistors(ABBmaxTempDiff)
  • Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
  • Averaged Wave number in inverse centimeters(wnumsum4)
  • Duration of scene view(sceneViewDuration)
  • Averaged Wave number in inverse centimeters(wnumsum8)
  • AERI LW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch1)(HBB2minNENestimateNo2Ch1)
  • altitude above sea levelaltunits(alt)
  • Shortwave radiance average (2282_2287 cm^-1) Elevated Air(elevatedLayerRadiance2282_2287)
  • Hatch status indicator, boolean with negative error conditions: 1:Open 0:Closed
    -1:Fault -2:Outside Valid Range -3:Neither Open Nor Closed(hatchOpen)
  • AERI SW Scene Brightness Temp Spectral Averages (Ch2)(SkyBrightnessTempSpectralAveragesCh2)
  • Averaged Wave number in inverse centimeters(wnumsum14)
  • Shortwave window brightness temperature from radiance average (2510_2515 cm^-1)(shortwaveWindowAirTemp2510_2515)
  • Averaged Wave number in inverse centimeters(wnumsum10)
  • Time at center of AERI sky observation period(Time_UTC_hours)
  • Radiance standard deviation during sky view averaged over (2295_2300 cm^-1)(skyViewStdDevRadiance2295_2300)
  • Character string containing instrument name(instrumentUnitNumber)

nsamwrtipC1.a1:
  • Noise injection temp at 23.8 GHz derived from this tip(tnd23I)
  • 23.8 GHz Blackbody signal(bb23)
  • 23.8 GHz sky brightness temperature derived from tip curve(tbskytip23)
  • 31.4 GHz goodness-of-fit coefficient(r31)
  • Noise injection temp at 31.4 GHz adjusted to tkbb(tnd31)
  • Noise diode mount temperature(tknd)
  • Actual Azimuth(actaz)
  • Noise injection temp at 31.4 GHz derived from this tip(tnd31I)
  • Blackbody kinetic temperature(tkbb)
  • Total water vapor along zenith path using tip-derived brightness temperatures(vaptip)
  • Temperature correction coefficient at 31.4 GHz(tc31)
  • Time offset from base_time(base_time)
  • 23.8 GHz goodness-of-fit coefficient(r23)
  • 31.4 GHz Blackbody signal(bb31)
  • Mixer kinetic (physical) temperature(tkxc)
  • 23.8 GHz blackbody+noise injection signal(bbn23)
  • Temperature correction coefficient at 23.8 GHz(tc23)
  • Water on Teflon window (1=WET, 0=DRY)(wet_window)
  • Total liquid water along zenith path using tip-derived brightness temperatures(liqtip)
  • east longitude for all the input platforms.(lon)
  • altitude above sea levelaltunits(alt)
  • 31.4 GHz sky signal(tipsky31)
  • 31.4 GHz blackbody+noise injection signal(bbn31)
  • Actual elevation angle(actel)
  • Noise injection temp at nominal temperature at 31.4 GHz(tnd_nom31)
  • 31.8 GHz sky brightness temperature derived from tip curve(tbskytip31)
  • 23.8 GHz sky signal(tipsky23)
  • Ambient temperature(tkair)
  • north latitude for all the input platforms.(lat)
  • Noise injection temp at nominal temperature at 23.8 GHz(tnd_nom23)
  • Noise injection temp at 23.8 GHz adjusted to tkbb(tnd23)
  • Time offset of tweaks from base_time(time_offset)

nsavceil25kC1.b1:
  • Percentage of nominal factory setting (0 to 999%)(receiver_sensitivity)
  • Third cloud base height(third_cbh)
  • Time offset of tweaks from base_time(time_offset)
  • altitude above sea levelaltunits(alt)
  • Flag indicating aeri retrieval status(status_flag)
  • Aerosol volume backscattering coefficient at 355 nm(backscatter)
  • Millivolts at internal ADC input (0 to 2500)(background_light)
  • distance to center of range bin after correcting for offset in sync(range)
  • Vertical visibility(vertical_visibility)
  • east longitude for all the input platforms.(lon)
  • Degrees from vertical (-15 to +90)(tilt_angle)
  • Altitude of highest signal(alt_highest_signal)
  • Lowest cloud base height detected.(first_cbh)
  • SUM of detected and normalized backscatter(sum_backscatter)
  • north latitude for all the input platforms.(lat)
  • Percentage of nominal factory setting (0 to 999%)(laser_pulse_energy)
  • Detection status. See details(detection_status)
  • Warning and alarm status bits(status_string)
  • 6 character string describing instrument measurement parameters(measurement_parameters)
  • Time offset from base_time(base_time)
  • Second lowest cloud base height(second_cbh)
  • Laser temperature(laser_temperature)
  • GPS raw data filename(filename)
  • Millivolts at internal ADC input(window_contamination)

nsa915rwpwindspecC1.a0:
  • Number of valid heights for each power(nheight)
  • Rx bandwidth switch code(bswitch)
  • Range Gate Spacing(rgs)
  • Ave Time per Average Spectra. Also known as dwell.(spcavetim)
  • Delay Time to 1st Gate(dly)
  • Elevation angle of Beam 0(elevation)
  • Spectral Data (signal strength/freq int)(spc_amp)
  • Interpulse Period(ipp)
  • Radial Velocity Spectral Resolution(vsr)
  • east longitude for all the input platforms.(lon)
  • Height of Center of Last Range Gate(rgl)
  • Time offset of tweaks from base_time(time_offset)
  • Time Domain Integration Time(tditime)
  • Time offset from base_time(base_time)
  • Vertical FFT Bandwidth(vband)
  • Sample Rate(sampr)
  • Height of Center of First Range Gate(rgf)
  • altitude above sea levelaltunits(alt)
  • Pulse Repetition Frequency(prf)
  • Array of heights for each sample time(height_t)
  • Oblique FFT Bandwidth(oband)
  • Number of Pulse Code Bits(pcbits)
  • Number of Coherent Samples/spectral point(ncoh)
  • Number of Individual Spectra/Average Spectrum(nspc)
  • Individual Spectrum Integration Time(sitime)
  • Particle radius at logarithmic center of bin(bins)
  • Height Index(range_gate)
  • north latitude for all the input platforms.(lat)
  • Beam Number(beam)
  • Pulse Length(plen)

nsamwrlosC1.b1:
  • Mean IR brightness temperature(ir_temp)
  • Ambient temperature(tkair)
  • Mean total water vapor amount along LOS path(vap)
  • Water on Teflon window (1=WET, 0=DRY)(wet_window)
  • 23.8 GHz sky signal(sky23)
  • Mean 23.8 GHz sky brightness temperature(tbsky23)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • Time offset from base_time(base_time)
  • Blackbody kinetic temperature(tkbb)
  • Temperature correction coefficient at 23.8 GHz(tc23)
  • 31.4 GHz Blackbody signal(bb31)
  • 31.4 GHz sky signal(sky31)
  • altitude above sea levelaltunits(alt)
  • Noise diode mount temperature(tknd)
  • Noise injection temp at nominal temperature at 23.8 GHz(tnd_nom23)
  • Actual Azimuth(actaz)
  • Noise injection temp at 23.8 GHz adjusted to tkbb(tnd23)
  • 23.8 GHz Blackbody signal(bb23)
  • 31.4 GHz blackbody+noise injection signal(bbn31)
  • Time offset of tweaks from base_time(time_offset)
  • east longitude for all the input platforms.(lon)
  • Mean total liquid water amount along LOS path(liq)
  • north latitude for all the input platforms.(lat)
  • Mixer kinetic (physical) temperature(tkxc)
  • Noise injection temp at nominal temperature at 31.4 GHz(tnd_nom31)
  • Noise injection temp at 31.4 GHz adjusted to tkbb(tnd31)
  • Actual elevation angle(actel)
  • Sky/Cloud Infra-Red Temperature(sky_ir_temp)
  • 23.8 GHz blackbody+noise injection signal(bbn23)
  • Temperature correction coefficient at 31.4 GHz(tc31)

nsaaerich1C1.b1:
  • wavenumbers for mean radiance spectra(wnum)
  • Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
  • Ambient air temperature at hatch opening(outsideAirTemp)
  • Time offset of tweaks from base_time(time_offset)
  • Version number of Operational Software(systemReleaseNumber)
  • Ambient temperature used in calibration(calibrationAmbientTemp)
  • Maximum departure from ideal of the mirror position over the course of all
    contributing views. Typically two hot, two ambient, and one scene view are
    examine(sceneMirPosEncoderMaxDrift)
  • Time at center of AERI sky observation period(Time_UTC_hours)
  • Hot blackbody temperature used in calibration(calibrationHBBtemp)
  • Time offset from midnight of date of file. For CO data, this is identical to
    time_offset and is included for compatibility.(time)
  • Time offset from base_time(base_time)
  • Hatch status indicator, boolean with negative error conditions: 1:Open 0:Closed
    -1:Fault -2:Outside Valid Range -3:Neither Open Nor Closed(hatchOpen)
  • Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
  • Observation atmospheric pressure in AERI electronics(atmosphericPressure)
  • wavenumbers for standard deviation of radiance spectra(wnum2)
  • altitude above sea levelaltunits(alt)
  • Time at center of AERI sky observation period(timeHHMMSS)
  • east longitude for all the input platforms.(lon)
  • Cold blackbody temperature used in calibration(calibrationCBBtemp)
  • Temperature of the AERI blackbody support structure(BBsupportStructureTemp)
  • Observation longitude(Longitude)
  • Character string containing instrument name(instrumentUnitNumber)
  • AERI instrument data channel number(channelNumber)
  • Observation Altitude(Altitude)
  • Relative humidity measured near Blackbodies. Use with Air Temperature Near BBs
    only.(atmosphericRelativeHumidity)
  • AERI instrument unit serial number(AERIunitNumber)
  • Julian Day including day and fraction of day(JulianDay)
  • north latitude for all the input platforms.(lat)
  • Downwelling radiance interpolated to standard wavenumber scale(mean_rad)
  • Difference between the sky view\'s radiance variance and the hot black body
    view\'s variance(standard_dev_mean_rad)
  • Scene mirror view angle in non-negative degrees, measured clockwise looking into
    interferometer window.(sceneMirrorAngle)
  • Observation date(dateYYMMDD)
  • Duration of scene view(sceneViewDuration)
  • Observation latitude(Latitude)

nsammcrmomC1.b1:
  • Delay to First Range Gate(StartGateDelay)
  • Time offset of tweaks from base_time(time_offset)
  • Receiver Cal Time Stamp(RxCalTimeStamp)
  • Number of Coherent Integrations(NumCoherentIntegrations)
  • Max. height of clutter removal(ClutterHeight)
  • Circular Depolarization Ratio(CircularDepolarizationRatio)
  • DC Filtering ON-OFF Status(DCFilterONOFF)
  • Average Noise Level (S/N<0)(AvgNoiseLevel)
  • Pulse Width(PulseWidth)
  • Current Receiver Number(ReceiverNumber)
  • Receiver Gain(RxGain)
  • RadarWaveLength(m) / [4 * InterPulsePeriod(s) * NumCoherentIntegrations](NyquistVelocity)
  • Windowing ON-OFF Status(WindowingONOFF)
  • MMCR Spectral Width(SpectralWidth)
  • Time Spacing Between Gates(GateSpacing)
  • Mean Noise Level(NoiseLevel)
  • Receiver 290K Level(Rx290KLevel)
  • Number of Receiver(NumReceivers)
  • Minimum detectable reflectivity(MinimumDetectableReflectivity)
  • TWT Status Code, details forthcoming from MMCR vendor(TWTStatusCode)
  • MMCR Reflectivity(Reflectivity)
  • Receiver Cal Check Level(CalCheckLevel)
  • Receiver Cal Check Time Stamp(CalCheckTime)
  • Number of Code Bits(NumCodeBits)
  • east longitude for all the input platforms.(lon)
  • Inter-Pulse Period(InterPulsePeriod)
  • Range Corrected Calibrated Power(RangeCorrectedPower)
  • altitude above sea levelaltunits(alt)
  • Receiver Sky Noise(SkyNoiseLevel)
  • Time associated with hourly averaged values(TimeAvg)
  • Data Quality Status(DataQualityStatus)
  • north latitude for all the input platforms.(lat)
  • Operating Set for this Record(ModeNum)
  • Radar Constant(RadarConstant)
  • radar mode char identifier(ModeDescription)
  • Power (uncalibrated)(Power)
  • Receiver Mode(ReceiverMode)
  • Number of Spectral Averages(NumSpectralAverages)
  • MMCR Mean Doppler Velocity(MeanDopplerVelocity)
  • Time offset from base_time(base_time)
  • Number of Gate Heights(NumHeights)
  • Number of Points in FFT(NumFFT)
  • Range Heights (center of radar sample volume)(heights)
  • Peak tranmitted power, averaged over the course of the hour(PeakTransmittedPowerAvg)
  • Time offset from midnight of date of file. For CO data, this is identical to
    time_offset and is included for compatibility.(time)
  • Signal to noise ratio(SignalToNoiseRatio)


Back To Table of Contents

DQRID : D050217.2
Start DateStart TimeEnd DateEnd Time
02/09/2005230002/10/20052300
Subject:
NSA/AERI/C1 - Blower motor failure
DataStreams:nsaaeriC1.00, nsaaerich2C1.b1, nsaaerirawC1.00, nsaaerisummaryC1.b1, nsaaeriengineerC1.b1,
nsaaerilblcloudsC1.c1
Description:
The blower motor failed on February 9, estimated time 23:00 GMT. The problem was repaired 
on February 10, 23:00 GMT. The blower motor serves two functions. It maintains the 
instrument window enclosure at the outside temperature and blows ice crystals from the 
enclosure. Failure of the motor caused the enclosure temperature to increase by approximately 12K 
(from 255 to 267K). Previous experience in comparing arctic instruments with the blower 
on and off have shown that if ice crystals enter the enclosure, there is a slight 
increase in the 3-5 um (ch 2) spectral intensity. It is unlikely that Ch 1 is affected.
Measurements:nsaaeriC1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

nsaaerilblcloudsC1.c1:
  • Calculated cloud cover fraction from the WSI(cloud_cover_fract)
  • Average of brightness temperatures calculated from AERI radiances within
    spectral window for channel 2: [2506.20,2511.02](mean_AERI_BT_channel_2)
  • Cloud base height estimate from the field mean_AERI_BT_channel_2(cbh_AERI_channel_2)

nsaaerirawC1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

nsaaerich2C1.b1:
  • Difference between the sky view\'s radiance variance and the hot black body
    view\'s variance(standard_dev_mean_rad)
  • Downwelling radiance interpolated to standard wavenumber scale(mean_rad)

nsaaeriengineerC1.b1:
  • Radiance standard deviation during sky view averaged over (2510_2515 cm^-1)(skyViewStdDevRadiance2510_2515)
  • Imaginary radiance during sky view averaged over (2282_2287 cm-1)(skyViewImaginaryRadiance2282_2287)
  • Imaginary radiance during sky view averaged over (2510_2515 cm-1)(skyViewImaginaryRadiance2510_2515)
  • Imaginary radiance during sky view averaged over (2295_2300 cm-1)(skyViewImaginaryRadiance2295_2300)
  • Shortwave surface air brightness temperature from radiance average (2295_2300
    cm^-1)(surfaceLayerAirTemp2295_2300)
  • Shortwave radiance average (2295_2300 cm^-1) Surface Air(surfaceLayerRadiance2295_2300)
  • Radiance standard deviation during sky view averaged over (2295_2300 cm^-1)(skyViewStdDevRadiance2295_2300)
  • Shortwave window radiance average (2510_2515 cm^-1)(shortwaveWindowRadiance2510_2515)
  • Radiance standard deviation during sky view averaged over (2282_2287 cm^-1)(skyViewStdDevRadiance2282_2287)
  • Shortwave window brightness temperature from radiance average (2510_2515 cm^-1)(shortwaveWindowAirTemp2510_2515)

nsaaerisummaryC1.b1:
  • Shortwave window radiance average (2510_2515 cm^-1)(shortwaveWindowRadiance2510_2515)
  • Shortwave window brightness temperature from radiance average (2510_2515 cm^-1)(shortwaveWindowAirTemp2510_2515)
  • Shortwave surface air brightness temperature from radiance average (2295_2300
    cm^-1)(surfaceLayerAirTemp2295_2300)
  • Shortwave elevated air brightness temperature from radiance average (2282_2287
    cm^-1)(elevatedLayerAirTemp2282_2287)
  • Shortwave radiance average (2282_2287 cm^-1) Elevated Air(elevatedLayerRadiance2282_2287)
  • Radiance standard deviation during sky view averaged over (2295_2300 cm^-1)(skyViewStdDevRadiance2295_2300)
  • Radiance standard deviation during sky view averaged over (2510_2515 cm^-1)(skyViewStdDevRadiance2510_2515)
  • Radiance standard deviation during sky view averaged over (2282_2287 cm^-1)(skyViewStdDevRadiance2282_2287)
  • Shortwave radiance average (2295_2300 cm^-1) Surface Air(surfaceLayerRadiance2295_2300)
  • AERI SW Scene Variability Spectral Averages (Ch2)(SkyUniformityCh2)
  • AERI SW Scene Brightness Temp Spectral Averages (Ch2)(SkyBrightnessTempSpectralAveragesCh2)
  • AERI SW Scene Radiance Spectral Averages (Ch2)(SkyRadianceSpectralAveragesCh2)


Back To Table of Contents

DQRID : D050224.3
Start DateStart TimeEnd DateEnd Time
02/09/2005230002/10/20052300
Subject:
NSA/AERI/C1 - Blower Motor Failure -Channel 1 data effect
DataStreams:nsaaeriC1.00, nsaaerirawC1.00, nsaaerisummaryC1.b1, nsaaeriengineerC1.b1,
nsaaerilblcloudsC1.c1
Description:
The blower motor failed on February 9, estimated time 23:00 GMT. The problem was repaired 
on February 10, 23:00 GMT. The blower motor serves two functions. It maintains the 
instrument window enclosure at the outside
temperature and blows ice crystals from the enclosure. Failure of the motor
caused the enclosure temperature to increase by approximately 12K (from 255
to 267K). Previous experience in comparing arctic instruments with the blower on and off 
have shown that if ice crystals enter the enclosure, there is a slight increase in the 3-5 
um (ch 2) spectral intensity. It is unlikely that Ch 1 is affected. However, we can not 
be certain that there is no problem with the data. Hence, this DQR should be considered a 
warning that Channel 1 data may be affected.
Measurements:nsaaerilblcloudsC1.c1:
  • Average of brightness temperatures calculated from AERI radiances within
    spectral window for channel 1: [1142.20,1147.03](mean_AERI_BT_channel_1)

nsaaeriC1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

nsaaerirawC1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

nsaaerisummaryC1.b1:
  • Longwave elevated air brightness temperature from radiance average (700_705
    cm^-1)(elevatedLayerAirTemp700_705)
  • AERI LW Scene Variability Spectral Averages (Ch1)(SkyUniformityCh1)
  • Longwave radiance average (675-680 cm^-1) Surface Air(surfaceLayerRadiance675_680)
  • Longwave surface air brightness temperature from radiance average (675_680
    cm^-1)(surfaceLayerAirTemp675_680)
  • Radiance standard deviation during sky view averaged over (985_990 cm^-1)(skyViewStdDevRadiance985_990)
  • AERI LW Scene NESR Spectral Averages (Ch1)(SkyNENCh1)
  • AERI LW Scene Brightness Temp Spectral Averages (Ch1)(SkyBrightnessTempSpectralAveragesCh1)
  • Longwave radiance average (700_705 cm^-1) Elevated Air(elevatedLayerRadiance700_705)
  • Radiance standard deviation during sky view averaged over (700_705 cm^-1)(skyViewStdDevRadiance700_705)
  • Longwave window radiance average (985_990 cm^-1)(longwaveWindowRadiance985_990)
  • Radiance standard deviation during sky view averaged over (675_680 cm^-1)(skyViewStdDevRadiance675_680)
  • Longwave window brightness temperature from radiance average (985_990 cm^-1)(longwaveWindowAirTemp985_990)
  • AERI LW Scene Radiance Spectral Averages (Ch1)(SkyRadianceSpectralAveragesCh1)

nsaaeriengineerC1.b1:
  • Longwave window brightness temperature from radiance average (985_990 cm^-1)(longwaveWindowAirTemp985_990)
  • Imaginary radiance during sky view averaged over (985_990 cm-1)(skyViewImaginaryRadiance985_990)
  • Longwave elevated air brightness temperature from radiance average (700_705
    cm^-1)(elevatedLayerAirTemp700_705)
  • The noise equivalent radiance observed in the shortwave channel during a sky
    view at 2500 cm^-1(SWskyNEN)
  • Imaginary radiance during sky view averaged over (700_705 cm-1)(skyViewImaginaryRadiance700_705)
  • Radiance standard deviation during sky view averaged over (700_705 cm^-1)(skyViewStdDevRadiance700_705)
  • Radiance standard deviation during sky view averaged over (675_680 cm^-1)(skyViewStdDevRadiance675_680)
  • Longwave radiance average (700_705 cm^-1) Elevated Air(elevatedLayerRadiance700_705)
  • Logical flag indicating whether shortwave channel noise equivalent radiance is
    acceptable in sky view (true/false). Determined using SWskyNEN and
    SWskyNENlimit.(SWskyNENacceptable)
  • Longwave window radiance average (985_990 cm^-1)(longwaveWindowRadiance985_990)
  • Longwave surface air brightness temperature from radiance average (675_680
    cm^-1)(surfaceLayerAirTemp675_680)
  • Radiance standard deviation during sky view averaged over (985_990 cm^-1)(skyViewStdDevRadiance985_990)
  • Imaginary radiance during sky view averaged over (675_680 cm-1)(skyViewImaginaryRadiance675_680)


Back To Table of Contents

DQRID : D060331.1
Start DateStart TimeEnd DateEnd Time
09/30/2005000007/01/20062359
Subject:
NSA/AERI/C1 - Excessive Noise in C1 AERI data
DataStreams:nsaaerich1C1.b1, nsaaerisummaryC1.b1
Description:
Initially it was believed that the greater noise level in AERI C1 data was due to the 
extended range detector, which has lower sensitivity. However, when the S01 AERI was 
installed next to the C1 AERI and it stabilized on 9/30/2005, it was observed that the noise 
levels on the newly installed S01 AERI were much lower than for the C1 AERI. Therefore, the 
excessive noise of the C1 AERI is not due to the fundamental nature of the extended range 
detector but instead due to failure within the detector. 

The failure could be due to a poor D* value of too high a detector temperature. It could 
also be caused by optical alignment issues. In either case, the spectral radiance data 
have much more noise and that results in larger error bars when using the radiance data, 
especially long wave data as monitored by the LW_HBB_NEN flag.

On 9/30/2005, the S01 AERI, which is next to the C1 AERI, came on-line and is producing 
low noise data. The S01 data should be used instead of the C1 data where low noise 
requirements are needed.

On 6/26/2006, the S01 AERI went offline due to a laser failure.  The C1 AERI was moved to 
the connex where data were within reasonable limits for an extended range detector.  
Beginning 20060701, the C1 data are the preferred AERI data set at the NSA Barrow location.
Measurements:nsaaerisummaryC1.b1:
  • Shortwave window radiance average (2510_2515 cm^-1)(shortwaveWindowRadiance2510_2515)
  • Longwave elevated air brightness temperature from radiance average (700_705
    cm^-1)(elevatedLayerAirTemp700_705)
  • Shortwave window brightness temperature from radiance average (2510_2515 cm^-1)(shortwaveWindowAirTemp2510_2515)
  • Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
  • Shortwave surface air brightness temperature from radiance average (2295_2300
    cm^-1)(surfaceLayerAirTemp2295_2300)
  • AERI LW Scene Variability Spectral Averages (Ch1)(SkyUniformityCh1)
  • Shortwave elevated air brightness temperature from radiance average (2282_2287
    cm^-1)(elevatedLayerAirTemp2282_2287)
  • Longwave radiance average (675-680 cm^-1) Surface Air(surfaceLayerRadiance675_680)
  • Shortwave radiance average (2282_2287 cm^-1) Elevated Air(elevatedLayerRadiance2282_2287)
  • The noise equivalent radiance observed in the longwave channel during a sky view
    at 1000 cm^-1(LWskyNEN)
  • Logical flag indicating whether longwave channel noise equivalent radiance is
    acceptable in sky view (true/false). Determined using LWskyNEN and
    LWskyNENlimit.(LWskyNENacceptable)
  • Longwave surface air brightness temperature from radiance average (675_680
    cm^-1)(surfaceLayerAirTemp675_680)
  • The noise equivalent radiance observed in the shortwave channel during a sky
    view at 2500 cm^-1(SWskyNEN)
  • Radiance standard deviation during sky view averaged over (985_990 cm^-1)(skyViewStdDevRadiance985_990)
  • Radiance standard deviation during sky view averaged over (2295_2300 cm^-1)(skyViewStdDevRadiance2295_2300)
  • AERI SW Scene NESR Spectral Averages (Ch2)(SkyNENCh2)
  • Characteristic value representing overall longwave channel responsivity(LWresponsivity)
  • AERI LW Scene NESR Spectral Averages (Ch1)(SkyNENCh1)
  • Radiance standard deviation during sky view averaged over (2510_2515 cm^-1)(skyViewStdDevRadiance2510_2515)
  • AERI LW Responsivity Spectral Averages (Ch1)(ResponsivitySpectralAveragesCh1)
  • Radiance standard deviation during sky view averaged over (2282_2287 cm^-1)(skyViewStdDevRadiance2282_2287)
  • Noise-equivalent Radiance in Hot Blackbody at 1000 cm-1(LW_HBB_NEN)
  • AERI SW Responsivity Spectral Averages (Ch2)(ResponsivitySpectralAveragesCh2)
  • AERI LW Scene Brightness Temp Spectral Averages (Ch1)(SkyBrightnessTempSpectralAveragesCh1)
  • Longwave window radiance average (985_990 cm^-1)(longwaveWindowRadiance985_990)
  • Longwave radiance average (700_705 cm^-1) Elevated Air(elevatedLayerRadiance700_705)
  • Radiance standard deviation during sky view averaged over (700_705 cm^-1)(skyViewStdDevRadiance700_705)
  • Logical flag indicating whether shortwave channel noise equivalent radiance is
    acceptable in sky view (true/false). Determined using SWskyNEN and
    SWskyNENlimit.(SWskyNENacceptable)
  • AERI LW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch1)(HBB2minNENestimateNo2Ch1)
  • AERI SW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch2)(HBB2minNENestimateNo1Ch2)
  • Noise-equivalent Radiance in Hot Blackbody at 2500 cm-1(SW_HBB_NEN)
  • Shortwave radiance average (2295_2300 cm^-1) Surface Air(surfaceLayerRadiance2295_2300)
  • AERI SW Scene Variability Spectral Averages (Ch2)(SkyUniformityCh2)
  • AERI LW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch1)(HBB2minNENestimateNo1Ch1)
  • AERI SW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch2)(HBB2minNENestimateNo2Ch2)
  • AERI SW Scene Brightness Temp Spectral Averages (Ch2)(SkyBrightnessTempSpectralAveragesCh2)
  • AERI SW Scene Radiance Spectral Averages (Ch2)(SkyRadianceSpectralAveragesCh2)
  • Radiance standard deviation during sky view averaged over (675_680 cm^-1)(skyViewStdDevRadiance675_680)
  • Longwave window brightness temperature from radiance average (985_990 cm^-1)(longwaveWindowAirTemp985_990)
  • AERI LW Scene Radiance Spectral Averages (Ch1)(SkyRadianceSpectralAveragesCh1)

nsaaerich1C1.b1:
  • Downwelling radiance interpolated to standard wavenumber scale(mean_rad)


Back To Table of Contents



END OF DATA