Data Quality Reports for Session: 104535 User: wlj Completed: 02/27/2007


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D060307.4NIM/TSI/M1 - Reprocess: incorrect daily moviesnimtsimovieM1.a1
D060419.1NIM/TSI/M1 - Reprocess: Data processing problemnimtsicldmaskM1.a1, nimtsiskycoverM1.b1
D060921.9NIM/TSI/M1 - Shadowband MisalignmentnimtsimovieM1.a1, nimtsicldmaskM1.a1, nimtsiskyimageM1.a1
D061024.1NIM/TSI/M1 - Shadowband glarenimtsiskycoverM1.b1


DQRID : D060307.4
Start DateStart TimeEnd DateEnd Time
02/11/2006063303/08/20062359
Subject:
NIM/TSI/M1 - Reprocess: incorrect daily movies
DataStreams:nimtsimovieM1.a1
Description:
Due to file management problems on the operating computer, the daily movie files are 
either missing, incomplete, or contain images from other days.
Measurements:nimtsimovieM1.a1:
  • (MPEG data stream - documentation not yet available)


Back To Table of Contents

DQRID : D060419.1
Start DateStart TimeEnd DateEnd Time
11/24/2005000009/19/20061729
Subject:
NIM/TSI/M1 - Reprocess: Data processing problem
DataStreams:nimtsicldmaskM1.a1, nimtsiskycoverM1.b1
Description:
Due to the high aerosol conditions at Niamey, the TSI appeared to be beyond the limits of 
processing the color JPEG image into cloud fraction values. Several attempts to adjust 
the sky filter values used to process the images did not yielded the desired results. The 
processed images indicate an opaque sky cover, even in the absence of clouds.

The problem was corrected by removing the neutral density filter from the lens and 
re-adjusting the sky filter values.

The data can be reprocessed.
Measurements:nimtsicldmaskM1.a1:
  • PNG data stream - documentation not supported(png)

nimtsiskycoverM1.b1:
  • Pixel count: number total thin(count.thin)
  • Pixel count: number thin in horizon area(region.horizon.count.thin)
  • Pixel count: number total opaque(count.opaque)
  • Pixel count: number opaque in horizon area(region.horizon.count.opaque)
  • Pixel count: number opaque in zenith circle(region.zenith.count.opaque)
  • Sunshine meter(sunny)
  • Pixel count: number opaque in sun circle(region.sun.count.opaque)
  • Pixel count: number thin in sun circle(region.sun.count.thin)
  • Percent opaque cloud(percent.opaque)
  • Percentage thin cloud(percent.thin)
  • Pixel count: number thin in zenith circle(region.zenith.count.thin)


Back To Table of Contents

DQRID : D060921.9
Start DateStart TimeEnd DateEnd Time
03/20/2006182009/29/20060945
Subject:
NIM/TSI/M1 - Shadowband Misalignment
DataStreams:nimtsimovieM1.a1, nimtsicldmaskM1.a1, nimtsiskyimageM1.a1
Description:
From installation, the shadowband was positioned south at solar noon until the vernal 
equinox when it began to migrate counter-clockwise until reaching east 37 days later on 4/26 
(about 9 days before mid-spring). The shadowband at solar noon continued to migrate until 
reaching its most northerly position (~15 deg) on the summer solstice (if everything was 
perfectly aligned, it probably would have been pointed north on this day). It then began 
to migrate clockwise and reached east again 56 days later on 8/16 (about 14 days after 
mid-summer). As expected, the shadowband reached its most southerly position on the 
autumnal equinox but was about 10 deg off of being due south. 

With the apparent alignment problem, I don't understand why the shadowband was mostly 
blocking the sun. When I started noticing this offset in May, I chose to leave it alone 
because I felt that adjusting the shadowband to where I thought it should be would cause it to 
not block the sun at either sunrise or sunset. 

The alignment was corrected on 9/29 (6 days after the day of the autumnal equinox).
Measurements:nimtsiskyimageM1.a1:
  • JPG data stream - documentation not supported(JPEG data stream - documentation not yet available)

nimtsicldmaskM1.a1:
  • PNG data stream - documentation not supported(png)

nimtsimovieM1.a1:
  • (MPEG data stream - documentation not yet available)


Back To Table of Contents

DQRID : D061024.1
Start DateStart TimeEnd DateEnd Time
08/17/2006131011/01/20060700
Subject:
NIM/TSI/M1 - Shadowband glare
DataStreams:nimtsiskycoverM1.b1
Description:
When the neutral density filter was removed from the lens, the reflection of the sun from 
the smooth shadowband strip became much brighter causing a glare in the image on clear 
days. To minimize this reflection, a rough surface (the "fuzzy" side of an adhesive velco 
strip) was placed along the length of the shadowband.
Measurements:nimtsiskycoverM1.b1:
  • Relative \'strength\' of direct sun(sun.strength)
  • Pixel count: number total in sun circle(region.sun.count)
  • Sunshine meter(sunny)


Back To Table of Contents



END OF DATA