| DQR ID | Subject | Data Streams Affected |
|---|---|---|
| D041117.2 | SGP/MWR/C1 - Reprocess: wrong retrievals | sgpmwrlosC1.a1, sgpmwrlosC1.b1, sgpmwrtipC1.a1, sgpqmemwrcolC1.c1 |
| D050722.1 | SGP/MWR/C1 - REPROCESS - Revised Retrieval Coefficients | sgpmwrlosC1.a1, sgpmwrlosC1.b1, sgpmwrtipC1.a1, sgp1mwravgC1.c1, sgp5mwravgC1.c1, sgpqmemwrcolC1.c1 |
| D050928.2 | TWP/MWR/C2 - New software version (4.15) installed | twpmwrlosC2.b1, twpmwrtipC2.a1 |
| D051011.6 | SGP/MWR/C1 - New software version (4.15) installed | sgpmwrlosC1.b1, sgpmwrtipC1.a1 |
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 09/21/2004 | 1643 | 11/11/2004 | 2100 |
| Subject: | SGP/MWR/C1 - Reprocess: wrong retrievals |
| DataStreams: | sgpmwrlosC1.a1, sgpmwrlosC1.b1, sgpmwrtipC1.a1, sgpqmemwrcolC1.c1 |
| Description: | When the computer and core configuration were upgraded, retrieval coefficients for BF1 were accidently included in the configuration file. The correct coefficients for CF1 were applied when the configuration file was updated. |
| Measurements: | sgpmwrtipC1.a1:
sgpmwrlosC1.b1:
sgpqmemwrcolC1.c1:
sgpmwrlosC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 04/16/2002 | 2000 | 06/28/2005 | 2300 |
| Subject: | SGP/MWR/C1 - REPROCESS - Revised Retrieval Coefficients |
| DataStreams: | sgpmwrlosC1.a1, sgpmwrlosC1.b1, sgpmwrtipC1.a1, sgp1mwravgC1.c1, sgp5mwravgC1.c1, sgpqmemwrcolC1.c1 |
| Description: | IN THE BEGINNING (June 1992), the retrieval coefficients used to derive the precipitable water vapor (PWV) and liquid water path (LWP) from the MWR brightness temperatures were based on the Liebe and Layton (1987) water vapor and oxygen absorption model and the Grant (1957) liquid water absorption model. Following the SHEBA experience, revised retrievals based on the more recent Rosenkranz (1998) water vapor and oxygen absorption models and the Liebe (1991) liquid waer absorption model were developed. The Rosenkranz water vapor absorption model resulted a 2 percent increase in PWV relative to the earlier Liebe and Layton model. The Liebe liquid water absorption model decreased the LWP by 10% relative to the Grant model. However, the increased oxygen absorption caused a 0.02-0.03 mm (20-30 g/m2) reduction in LWP, which was particularly significant for low LWP conditions (i.e. thin clouds encountered at SHEBA). Recently, it has been shown (Liljegren, Boukabara, Cady-Pereira, and Clough, TGARS v. 43, pp 1102-1108, 2005) that the half-width of the 22 GHz water vapor line from the HITRAN compilation, which is 5 percent smaller than the Liebe and Dillon (1969) half-width used in Rosenkranz (1998), provided a better fit to the microwave brightness temperature measurements at 5 frequencies in the range 22-30 GHz, and yielded more accurate retrievals. Accordingly, revised MWR retrieval coefficients have been developed using MONORTM, which utilizes the HITRAN compilation for its spectroscopic parameters. These new retrievals provide 3 percent less PWV and 2.6 percent greater LWP than the previous retrievals based on Rosenkranz (1998). Although the MWR data will be reprocessed to apply the new monortm-based retrievals, for most purposes it will be sufficient to correct the data using the following factors: PWV_MONORTM = 0.9695 * PWV_ROSENKRANZ LWP_MONORTM = 1.026 * LWP_ROSENKRANZ The Rosenkranz-based retrieval coefficients became active as follows (BCR 456): SGP/C1 (Lamont) 4/16/2002, 2000 SGP/B1 (Hillsboro) 4/12/2002, 1600 SGP/B4 (Vici) 4/15/2002, 2300 SGP/B5 (Morris) 4/15/2002, 2300 SGP/B6 (Purcell) 4/16/2002, 2200 SGP/E14(Lamont) 4/16/2002, 0000 NSA/C1 (Barrow) 4/25/2002, 1900 NSA/C2 (Atqasuk) 4/18/2002, 1700 TWP/C1 (Manus) 5/04/2002, 0200 TWP/C2 (Nauru) 4/27/2002, 0600 TWP/C3 (Darwin) inception The MONORTM-based retrieval coefficients became active as follows (BCR 984): SGP/C1 (Lamont) 6/28/2005, 2300 SGP/B1 (Hillsboro) 6/24/2005, 2100 SGP/B4 (Vici) 6/24/2005, 2100 SGP/B5 (Morris) 6/24/2005, 2100 SGP/B6 (Purcell) 6/24/2005, 1942 SGP/E14(Lamont) 6/28/2005, 2300 NSA/C1 (Barrow) 6/29/2005, 0000 NSA/C2 (Atqasuk) 6/29/2005, 0000 TWP/C1 (Manus) 6/30/2005, 2100 TWP/C2 (Nauru) 6/30/2005, 2100 TWP/C3 (Darwin) 6/30/2005, 2100 PYE/M1 (Pt. Reyes) 4/08/2005, 1900** ** At Pt. Reyes, the original retrieval coefficients implemented in March 2005 were based on a version of the Rosenkranz model that had been modified to use the HITRAN half-width at 22 GHz and to be consistent with the water vapor continuum in MONORTM. These retrievals yield nearly identical results to the MONORTM retrievals. Therefore the Pt. Reyes data prior to 4/08/2005 may not require reprocessing. |
| Measurements: | sgpmwrtipC1.a1:
sgp5mwravgC1.c1:
sgpmwrlosC1.b1:
sgp1mwravgC1.c1:
sgpqmemwrcolC1.c1:
sgpmwrlosC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 11/01/2002 | 2101 | 09/15/2005 | 1424 |
| Subject: | TWP/MWR/C2 - New software version (4.15) installed |
| DataStreams: | twpmwrlosC2.b1, twpmwrtipC2.a1 |
| Description: | A problem began with the installation of MWR.EXE version 4.12 in November 2002. The software had been upgraded from a "DOS" to a "Windows"-compiled program to address an earlier problem. The software upgrade corrected the earlier problem but introduced a new one that caused line-of-sight observing cycles to be skipped, a 15% reduction in the number of tip curves, and saturation of CPU usage. Software versions 4.13 and 4.14 also produced these problems. The new MWR software version (4.15) was installed on 9/15/2005. As a consequence of this upgrade, the tip curve frequency increased. The tip cycle time decreased from ~60s to ~50s. |
| Measurements: | twpmwrlosC2.b1:
twpmwrtipC2.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 07/31/2002 | 2027 | 08/04/2005 | 1959 |
| Subject: | SGP/MWR/C1 - New software version (4.15) installed |
| DataStreams: | sgpmwrlosC1.b1, sgpmwrtipC1.a1 |
| Description: | A problem began with the installation of MWR.EXE version 4.12 in July 2002. The software had been upgraded from a "DOS" to a "Windows"-compiled program to address an earlier problem. The software upgrade corrected the earlier problem but introduced a new one that caused line-of-sight observing cycles to be skipped, a 15% reduction in the number of tip curves, and saturation of CPU usage. Software versions 4.13 and 4.14 also produced these problems. The new MWR software, version 4.15, was installed on 08/04/2005. As a consequence of this upgrade, the tip curve frequency increased. The tip cycle time decreased from ~60s to ~50s. |
| Measurements: | sgpmwrtipC1.a1:
sgpmwrlosC1.b1:
|