TWP/TSI/C1 - high control board temperature

The TT8 control board temperature was high, ~50C, so that the cooling fan was constantly 
on. It appears that the heat sinks were not transferred from the original board to the new 
one when it was replaced. The problem was corrected when heat sinks were installed.

• Pixel count: number thin in zenith circle(region.zenith.count.thin)
• Pixel count: number thin in horizon area(region.horizon.count.thin)
• Percentage thin cloud(percent.thin)
• Pixel count: number total indeterminant(count.unknown)
• Relative \'strength\' of direct sun(sun.strength)
• Pixel count: number opaque in sun circle(region.sun.count.opaque)
• Pixel count: number total in horizon area(region.horizon.count)
• Percent opaque cloud(percent.opaque)
• Pixel count: number below horizon in image(count.sub.horz)
• Sunshine meter(sunny)
• Solar azimuth angle(solar.azimuth)
• Pixel count: number total in processed circle(count.sky)
• Pixel count: number total opaque(count.opaque)
• Pixel count: number opaque in zenith circle(region.zenith.count.opaque)
• Pixel count: number total in zenith circle(region.zenith.count)
• Pixel count: camera and sun strip mask(count.mask)
• Pixel count: number thin in sun circle(region.sun.count.thin)
• Pixel count: number total thin(count.thin)
• Sun altitude above horizon(solar.altitude)
• Pixel count: number opaque in horizon area(region.horizon.count.opaque)
• Pixel count: number total between horizon and processed circle(count.sub.proczen)
• Pixel count: number total in sun circle(region.sun.count)
• Pixel count: box, outside mirror area(count.box)