| DQR ID | Subject | Data Streams Affected |
|---|
| D041027.1 | NSA/MWRP/C1 - Missing data | nsamwrpC1.00, nsamwrpC1.b1 |
| D050902.1 | NSA/MWRP/C1 - Incorrect or missing data | nsamwrpC1.00, nsamwrpC1.b1, nsamwrprawC1.00 |
| D060419.5 | NSA/MWRP/C1 - wrong calibration | nsamwrpC1.00, nsamwrpC1.b1, nsamwrprawC1.00 |
| D060427.2 | NSA/MWRP/C1 - Bad calibration values | nsamwrpC1.00, nsamwrpC1.b1, nsamwrprawC1.00 |
| D060626.1 | NSA/MWRP/C1 - Missing data | nsamwrpC1.00, nsamwrpC1.b1, nsamwrprawC1.00 |
| D061114.11 | NSA/MWRP/C1 - Intermittent data | nsamwrpC1.00, nsamwrpC1.b1, nsamwrprawC1.00 |
| D070413.2 | NSA/MWRP/C1 - Missing data | nsamwrpC1.00, nsamwrpC1.b1, nsamwrprawC1.00 |
| Subject: | NSA/MWRP/C1 - Incorrect or missing data |
| DataStreams: | nsamwrpC1.00, nsamwrpC1.b1, nsamwrprawC1.00
|
| Description: | The MWRP had a problem with the ambient temperature sensor situated in the blower
assembly. This caused corrupted data files and software crashes. The blower assembly was removed,
sent to the vendor for repair on 9/22, and re-installed on 10/12. |
| Measurements: | nsamwrpC1.00: - Raw data stream - documentation not supported(raw)
nsamwrpC1.b1: - Expected root-mean-square error in liquid water path retrieval(liquidWaterPathRmsError)
- Derived relative humidity(relativeHumidity)
- Internal blackbody reference temperature(blackbodyTemperature)
- Expected root-mean-square error in temperature retrieval(temperatureRmsError)
- Retrieved liquid water path(liquidWaterPath)
- Surface pressure at instrument(surfacePressure)
- atmospheric pressure at mean sea level and at tropopause (NGM250 predicted)(pressure)
- Retrieved liquid water path using only 23.835 and 30.0 GHz(liquidWaterPath2)
- Data quality flags(dataQualityFlags)
- Surface water vapor density at instrument(surfaceWaterVaporDensity)
- Derived virtual temperature(virtualTemperature)
- Expected root-mean-square error in water vapor density retrieval(waterVaporDensityRmsError)
- Equilibrium level pressure(equilibriumLevelPres)
- Time offset from base_time(base_time)
- Zenith-pointing infrared temperature at 10um(infraredTemperature)
- Height of bins above ground level for the temperature, retrieved water vapor,
and pressure profile(height) - north latitude for all the input platforms.(lat)
- altitude above sea levelaltunits(alt)
- Total precipitable water vapor, from microwave radiometer(totalPrecipitableWater)
- Interpolated dewpoint temperature(dewpointTemperature)
- Solar azimuth referenced to the Central Facility.(azimuth)
- Cloud-base height, from Micropulse LIDAR or Belfort LIDAR ceilometer(cloudBaseHeight)
- Expected root-mean-square error in precipitable water retrieval using only
23.835 and 30.0 GHz(totalPrecipitableWater2RmsError) - Expected root-mean-square error in precipitable water retrieval(totalPrecipitableWaterRmsError)
- Elevation angle of Beam 0(elevation)
- Lifting condensation level pressure(liftingCondensationLevelPres)
- Level of free convection pressure(levelFreeConvectionPres)
- Retrieved water vapor density(waterVaporDensity)
- east longitude for all the input platforms.(lon)
- Retrieved total precipitable water vapor using only 23.835 and 30.0 GHz(totalPrecipitableWater2)
- Microwave brightness temperature(brightnessTemperature)
- Frequency(frequency)
- Convective available potential energy(cape)
- Flag indicating moisture sensor status(wetWindowFlag)
- Expected root-mean-square error in liquid water content retrieval(liquidWaterContentRmsError)
- Lifting condensation level(liftingCondensationLevel)
- Level of free convection(levelFreeConvection)
- Surface air temperature for last 5 minutes of previous hour(temperature)
- Surface absolute temperature at instrument(surfaceTemperature)
- Expected root-mean-square error in liquid water path retrieval using only 23.835
and 30.0 GHz(liquidWaterPath2RmsError) - Retrieved cloud liquid water content(liquidWaterContent)
- Time offset of tweaks from base_time(time_offset)
- Surface relative humidity at instrument(surfaceRelativeHumidity)
- Interpolated water vapor mixing ratio(waterVaporMixingRatio)
- Time offset from midnight of date of file. For CO data, this is identical to
time_offset and is included for compatibility.(time) - Equilibrium level(equilibriumLevel)
nsamwrprawC1.00: - Raw data stream - documentation not supported(raw)
|
| Subject: | NSA/MWRP/C1 - wrong calibration |
| DataStreams: | nsamwrpC1.00, nsamwrpC1.b1, nsamwrprawC1.00
|
| Description: | On 4/13 a calibration was attempted. However the calibration was not successful. A new
calibration was completed on 4/13 20:00 UTC. |
| Measurements: | nsamwrpC1.00: - Raw data stream - documentation not supported(raw)
nsamwrpC1.b1: - Expected root-mean-square error in liquid water path retrieval(liquidWaterPathRmsError)
- Derived relative humidity(relativeHumidity)
- Internal blackbody reference temperature(blackbodyTemperature)
- Expected root-mean-square error in temperature retrieval(temperatureRmsError)
- Retrieved liquid water path(liquidWaterPath)
- Surface pressure at instrument(surfacePressure)
- atmospheric pressure at mean sea level and at tropopause (NGM250 predicted)(pressure)
- Retrieved liquid water path using only 23.835 and 30.0 GHz(liquidWaterPath2)
- Data quality flags(dataQualityFlags)
- Surface water vapor density at instrument(surfaceWaterVaporDensity)
- Derived virtual temperature(virtualTemperature)
- Expected root-mean-square error in water vapor density retrieval(waterVaporDensityRmsError)
- Equilibrium level pressure(equilibriumLevelPres)
- Time offset from base_time(base_time)
- Zenith-pointing infrared temperature at 10um(infraredTemperature)
- Height of bins above ground level for the temperature, retrieved water vapor,
and pressure profile(height) - north latitude for all the input platforms.(lat)
- altitude above sea levelaltunits(alt)
- Total precipitable water vapor, from microwave radiometer(totalPrecipitableWater)
- Interpolated dewpoint temperature(dewpointTemperature)
- Solar azimuth referenced to the Central Facility.(azimuth)
- Cloud-base height, from Micropulse LIDAR or Belfort LIDAR ceilometer(cloudBaseHeight)
- Expected root-mean-square error in precipitable water retrieval using only
23.835 and 30.0 GHz(totalPrecipitableWater2RmsError) - Expected root-mean-square error in precipitable water retrieval(totalPrecipitableWaterRmsError)
- Elevation angle of Beam 0(elevation)
- Lifting condensation level pressure(liftingCondensationLevelPres)
- Level of free convection pressure(levelFreeConvectionPres)
- Retrieved water vapor density(waterVaporDensity)
- east longitude for all the input platforms.(lon)
- Retrieved total precipitable water vapor using only 23.835 and 30.0 GHz(totalPrecipitableWater2)
- Microwave brightness temperature(brightnessTemperature)
- Frequency(frequency)
- Convective available potential energy(cape)
- Flag indicating moisture sensor status(wetWindowFlag)
- Expected root-mean-square error in liquid water content retrieval(liquidWaterContentRmsError)
- Lifting condensation level(liftingCondensationLevel)
- Level of free convection(levelFreeConvection)
- Surface air temperature for last 5 minutes of previous hour(temperature)
- Surface absolute temperature at instrument(surfaceTemperature)
- Expected root-mean-square error in liquid water path retrieval using only 23.835
and 30.0 GHz(liquidWaterPath2RmsError) - Retrieved cloud liquid water content(liquidWaterContent)
- Time offset of tweaks from base_time(time_offset)
- Surface relative humidity at instrument(surfaceRelativeHumidity)
- Interpolated water vapor mixing ratio(waterVaporMixingRatio)
- Time offset from midnight of date of file. For CO data, this is identical to
time_offset and is included for compatibility.(time) - Equilibrium level(equilibriumLevel)
nsamwrprawC1.00: - Raw data stream - documentation not supported(raw)
|
| Subject: | NSA/MWRP/C1 - Intermittent data |
| DataStreams: | nsamwrpC1.00, nsamwrpC1.b1, nsamwrprawC1.00
|
| Description: | Starting on 10/3 the computer was going idle and not communicating with the radiometer. On
10/11 some MS Windows settings were changed and the computer has been working since.
Between 10/3 and 10/11 there are extended data gaps. |
| Measurements: | nsamwrpC1.00: - Raw data stream - documentation not supported(raw)
nsamwrpC1.b1: - Expected root-mean-square error in liquid water path retrieval(liquidWaterPathRmsError)
- Derived relative humidity(relativeHumidity)
- Internal blackbody reference temperature(blackbodyTemperature)
- Expected root-mean-square error in temperature retrieval(temperatureRmsError)
- Retrieved liquid water path(liquidWaterPath)
- Surface pressure at instrument(surfacePressure)
- atmospheric pressure at mean sea level and at tropopause (NGM250 predicted)(pressure)
- Retrieved liquid water path using only 23.835 and 30.0 GHz(liquidWaterPath2)
- Data quality flags(dataQualityFlags)
- Surface water vapor density at instrument(surfaceWaterVaporDensity)
- Derived virtual temperature(virtualTemperature)
- Expected root-mean-square error in water vapor density retrieval(waterVaporDensityRmsError)
- Equilibrium level pressure(equilibriumLevelPres)
- Time offset from base_time(base_time)
- Zenith-pointing infrared temperature at 10um(infraredTemperature)
- Height of bins above ground level for the temperature, retrieved water vapor,
and pressure profile(height) - north latitude for all the input platforms.(lat)
- altitude above sea levelaltunits(alt)
- Total precipitable water vapor, from microwave radiometer(totalPrecipitableWater)
- Interpolated dewpoint temperature(dewpointTemperature)
- Solar azimuth referenced to the Central Facility.(azimuth)
- Cloud-base height, from Micropulse LIDAR or Belfort LIDAR ceilometer(cloudBaseHeight)
- Expected root-mean-square error in precipitable water retrieval using only
23.835 and 30.0 GHz(totalPrecipitableWater2RmsError) - Expected root-mean-square error in precipitable water retrieval(totalPrecipitableWaterRmsError)
- Elevation angle of Beam 0(elevation)
- Lifting condensation level pressure(liftingCondensationLevelPres)
- Level of free convection pressure(levelFreeConvectionPres)
- Retrieved water vapor density(waterVaporDensity)
- east longitude for all the input platforms.(lon)
- Retrieved total precipitable water vapor using only 23.835 and 30.0 GHz(totalPrecipitableWater2)
- Microwave brightness temperature(brightnessTemperature)
- Frequency(frequency)
- Convective available potential energy(cape)
- Flag indicating moisture sensor status(wetWindowFlag)
- Expected root-mean-square error in liquid water content retrieval(liquidWaterContentRmsError)
- Lifting condensation level(liftingCondensationLevel)
- Level of free convection(levelFreeConvection)
- Surface air temperature for last 5 minutes of previous hour(temperature)
- Surface absolute temperature at instrument(surfaceTemperature)
- Expected root-mean-square error in liquid water path retrieval using only 23.835
and 30.0 GHz(liquidWaterPath2RmsError) - Retrieved cloud liquid water content(liquidWaterContent)
- Time offset of tweaks from base_time(time_offset)
- Surface relative humidity at instrument(surfaceRelativeHumidity)
- Interpolated water vapor mixing ratio(waterVaporMixingRatio)
- Time offset from midnight of date of file. For CO data, this is identical to
time_offset and is included for compatibility.(time) - Equilibrium level(equilibriumLevel)
nsamwrprawC1.00: - Raw data stream - documentation not supported(raw)
|