| Measurements: | sgpmplC1.00: - Raw data stream - documentation not supported(Raw data stream - documentation not supported)
sgpmplcbh1scottC1.c0: - Raw data stream - documentation not supported(Raw data stream - documentation not supported)
sgpmplC1.a1: - Time offset from base_time(base_time)
- Preliminary cloud base height above ground level(preliminary_cbh)
- Time offset of tweaks from base_time(time_offset)
- Maximum altitude retrieved from multichannel scalar card.(max_altitude)
- Detector temperature(detector_temp)
- Repetition rate, or Trigger Frequency of the laser(trigger_freq)
- north latitude for all the input platforms.(lat)
- distance to center of range bin after correcting for offset in sync(range)
- Number of laser pulses summed during measurement interval(shots_summed)
- value represents date when configuration is first applicable as YYYYMMDD(property)
- Background signal(background_signal)
- Aerosol volume backscattering coefficient at 355 nm(backscatter)
- Amount of time the actual laser pulse lags behind the sync trigger(laser_sync_offset)
- Voltage level which operates the thermistor(voltage_10)
- Height of bins above ground level for the temperature, retrieved water vapor,
and pressure profile(height) - Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
- Number of laser pulses summed during measurement interval(shots_sum)
- Amount of time the scalar lags behind the sync trigger(scalar_sync_offset)
- Laser temperature(laser_temp)
- Angle of inclination with respect to horizontal(transceiver_altitude_angle)
- Distance from leading edge of first range bin to the center of each bin .(range_bins)
- effective range offset due to poor sync between laser firing and A/D trigger.(range_offset)
- Repetition rate, or Trigger Frequency of the laser(pulse_rep)
- Angle of orientation with respect to true geographic north(transceiver_azimuth_angle)
- Energy output per pulse of transmitted laser beam at 532 nm (Doubled Nd -YLF)(energy_monitor)
- Instrument temperature(instrument_temp)
- Amount of time laser pulse lags behind the scalar trigger(laser_scalar_sync_offset)
- Width of range-bins calculated from range_bin_time(range_bin_width)
- altitude above sea levelaltunits(alt)
- Time offset from midnight of date of file. For CO data, this is identical to
time_offset and is included for compatibility.(time) - required to correct raw counts for detector deadtime prior to all other
corrections.(deadtime_correction) - Voltage level which operates the energy monitor(voltage_15)
- Filter temperature(filter_temp)
- Sum of raw backscatter counts per bin prior to ANY corrections.(total_counts)
- Voltage level which operates the A/D card and the detector(voltage_05)
- east longitude for all the input platforms.(lon)
sgpmplcbh1scottC1.c1: - Time offset of tweaks from base_time(time_offset)
- east longitude for all the input platforms.(lon)
- north latitude for all the input platforms.(lat)
- altitude above sea levelaltunits(alt)
- Time offset from base_time(base_time)
- Average cloud base height used in the retrieval(cbh)
sgpmplnor1campC1.c1: - Background signal(background_signal)
- Instrument temperature(instrument_temp)
- Time offset of tweaks from base_time(time_offset)
- Cloud base height (for first cloud above height threshold)(cloud_base_height)
- Energy output per pulse of transmitted laser beam at 532 nm (Doubled Nd -YLF)(energy_monitor)
- north latitude for all the input platforms.(lat)
- Cloud mask(cloud_mask_2)
- Height of bins above ground level for the temperature, retrieved water vapor,
and pressure profile(height) - Number of laser pulses summed during measurement interval(shots_summed)
- Repetition rate, or Trigger Frequency of the laser(pulse_rep)
- The update time of the historical baseline used for the cloud boundary
determination of this sample(baseline_update_time) - Cloud top height (for highest cloud sensed)(cloud_top_height)
- Aerosol volume backscattering coefficient at 355 nm(backscatter)
- Flag indicating whether the beam was extinguished at indicated cloud top(cloud_top_attenuation_flag)
- Detector temperature(detector_temp)
- Cloud mask(cloud_mask_1)
- Laser temperature(laser_temp)
- east longitude for all the input platforms.(lon)
- Time offset from base_time(base_time)
- Relative random error in backscatter profiles(random_error)
- altitude above sea levelaltunits(alt)
sgpmplC1.a0: - Cloud base height (for first cloud above height threshold)(cloud_base_height)
- Instrument temperature(instrument_temp)
- Repetition rate, or Trigger Frequency of the laser(pulse_rep)
- Voltage level which operates the energy monitor(voltage_15)
- Instrument temperature(instrument_temperature)
- Background signal(background_signal)
- Voltage level which operates the A/D card and the detector(voltage_05)
- Time offset from base_time(base_time)
- Number of laser pulses summed during measurement interval(shots_summed)
- north latitude for all the input platforms.(lat)
- Voltage level which operates the thermistor(voltage_10)
- Energy output per pulse of transmitted laser beam at 532 nm (Doubled Nd -YLF)(energy_monitor)
- Filter temperature(filter_temp)
- Laser temperature(laser_temp)
- Binary data quality flag(cloud_base_height_dq_flag)
- Aerosol volume backscattering coefficient at 355 nm(backscatter)
- Height of bins above ground level for the temperature, retrieved water vapor,
and pressure profile(height) - east longitude for all the input platforms.(lon)
- Detector temperature(detector_temp)
- Time offset of tweaks from base_time(time_offset)
- altitude above sea levelaltunits(alt)
|