Data Quality Reports for Session: 107644 User: rosanne Completed: 09/10/2007


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D001115.1SGP/MWR/B1 - occasional negative brightness temperaturessgpmwrlosB1.00, sgpmwrlosB1.a1, sgpmwrlosB1.b1, sgpmwrtipB1.00, sgpmwrtipB1.a1
D030312.10SGP/MWR/C1 - Intermittent Negative Sky Brightness Temperaturessgp1mwravgC1.c1, sgp5mwravgC1.c1, sgpmwrlosC1.a1, sgpmwrlosC1.b1
D030312.2SGP/MWR/B1 - Intermittent Negative Sky Brightness TemperaturessgpmwrlosB1.a1, sgpmwrlosB1.b1
D030312.3SGP/MWR/B4 - Intermittent Negative Sky Brightness TemperaturessgpmwrlosB4.a1, sgpmwrlosB4.b1
D030312.4SGP/MWR/B5 - Intermittent Negative Sky Brightness TemperaturessgpmwrlosB5.a1, sgpmwrlosB5.b1
D030312.5SGP/MWR/B6 - Intermittent Negative Sky Brightness TemperaturessgpmwrlosB6.a1, sgpmwrlosB6.b1
D030822.2SGP/MWR/B1 - min/max/delta values incorrectsgpmwrlosB1.b1
D030822.3SGP/MWR/B4 - min/max/delta values incorrectsgpmwrlosB4.b1
D030822.4SGP/MWR/B5 - min/max/delta values incorrectsgpmwrlosB5.b1
D030822.5SGP/MWR/B6 - min/max/delta values incorrectsgpmwrlosB6.b1
D040526.2SGP/AERI/C1 - Metadata errorssgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1,
sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpqmeaerilblC1.c1,
sgpqmeaerilbllsC1.c1, sgpqmeaerimeansC1.c1
D040805.4SGP/AERI/B1 - Increased radiative uncertainty during hot summer afternoonssgpaerich1B1.a1, sgpaerich2B1.a1
D040806.2SGP/AERI/B4 - Increased radiative uncertainty during hot summer afternoonssgpaerich1B4.a1, sgpaerich2B4.a1
D040806.3SGP/AERI/B5 - Increased radiative uncertainty during hot summer afternoonssgpaerich1B5.a1, sgpaerich2B5.a1
D040806.5SGP/AERI/B6 - Increased radiative uncertainty during hot summer afternoonssgpaerich1B6.a1, sgpaerich2B6.a1
D040816.1SGP/AERI/C1 - Data Reprocessed to correct laser wavenumbersgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1
D990124.2SGP/SONDE - Dry bias in sonde RHDsgpsondeB1.00, DsgpsondeB1.a0, DsgpsondeB1.a1, DsgpsondeB4.00, DsgpsondeB4.a0,
DsgpsondeB4.a1, DsgpsondeB5.00, DsgpsondeB5.a0, DsgpsondeB5.a1, DsgpsondeC1.00, DsgpsondeC1.a0,
DsgpsondeC1.a1, DsgpsondenogcptucalcB1.c1, DsgpsondenogcptucalcB4.c1,
DsgpsondenogcptucalcB5.c1, DsgpsondenogcptucalcC1.c1, DsgpsondenogcwrpnB1.c1, DsgpsondenogcwrpnB4.c1,
DsgpsondenogcwrpnB5.c1, DsgpsondenogcwrpnC1.c1, DsgpsondeptuB1.00, DsgpsondeptuB4.00,
DsgpsondeptuB5.00, DsgpsondeptuB6.00, DsgpsondeptuC1.00, DsgpsondeptucalcB1.c1,
DsgpsondeptucalcB4.c1, DsgpsondeptucalcB5.c1, DsgpsondeptucalcC1.c1, sgpsondeB1.00,
sgpsondeB1.a0, sgpsondeB1.a1, sgpsondeB4.00, sgpsondeB4.a0, sgpsondeB4.a1, sgpsondeB5.00,
sgpsondeB5.a0, sgpsondeB5.a1, sgpsondeB6.00, sgpsondeC1.00, sgpsondeC1.a0, sgpsondeC1.a1,
sgpsondeptuC1.00, sgpsondewnpnB1.a0, sgpsondewnpnB1.a1, sgpsondewnpnB4.a0,
sgpsondewnpnB4.a1, sgpsondewnpnB5.a0, sgpsondewnpnB5.a1, sgpsondewnpnB6.a0, sgpsondewnpnB6.a1,
sgpsondewnpnC1.a0, sgpsondewnpnC1.a1, sgpsondewnprC1.a0, sgpsondewnprC1.a1,
sgpsondewrpnB1.00, sgpsondewrpnB1.a0, sgpsondewrpnB1.a1, sgpsondewrpnB4.00, sgpsondewrpnB4.a0,
sgpsondewrpnB4.a1, sgpsondewrpnB5.00, sgpsondewrpnB5.a0, sgpsondewrpnB5.a1,
sgpsondewrpnB6.00, sgpsondewrpnB6.a0, sgpsondewrpnB6.a1, sgpsondewrpnC1.00, sgpsondewrpnC1.a0,
sgpsondewrpnC1.a1, sgpsondewrprB1.00, sgpsondewrprB1.a0, sgpsondewrprB1.a1,
sgpsondewrprB4.00, sgpsondewrprB4.a0, sgpsondewrprB4.a1, sgpsondewrprB5.00, sgpsondewrprB5.a0,
sgpsondewrprB5.a1, sgpsondewrprC1.00, sgpsondewrprC1.a0, sgpsondewrprC1.a1


DQRID : D001115.1
Start DateStart TimeEnd DateEnd Time
02/27/2000000006/07/20002359
Subject:
SGP/MWR/B1 - occasional negative brightness temperatures
DataStreams:sgpmwrlosB1.00, sgpmwrlosB1.a1, sgpmwrlosB1.b1, sgpmwrtipB1.00, sgpmwrtipB1.a1
Description:
Occasional spikes in the MWR data were observed. Inspection of
the data indicates that these are due to spikes in the gain that result from
either unrealistically low values of the blackbody target temperature (~150 K) or
unrealistically low values of the microwave signal counts when viewing the
blackbody target. Unrealistically low values of the mixer temperature have also been
observed.
Measurements:sgpmwrlosB1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

sgpmwrlosB1.a1:
  • 23.8 GHz sky brightness temperature(23tbsky)
  • MWR column precipitable water vapor(vap)
  • Averaged total liquid water along LOS path(liq)
  • 31.4 GHz sky brightness temperature(31tbsky)

sgpmwrlosB1.b1:
  • Mean 23.8 GHz sky brightness temperature(tbsky23)
  • Averaged total liquid water along LOS path(liq)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • MWR column precipitable water vapor(vap)

sgpmwrtipB1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

sgpmwrtipB1.a1:
  • 23.8 GHz sky signal(tipsky23)
  • 31.4 GHz sky signal(tipsky31)
  • Mixer kinetic (physical) temperature(tkxc)


Back To Table of Contents

DQRID : D030312.10
Start DateStart TimeEnd DateEnd Time
11/17/1999180007/31/20022034
Subject:
SGP/MWR/C1 - Intermittent Negative Sky Brightness Temperatures
DataStreams:sgp1mwravgC1.c1, sgp5mwravgC1.c1, sgpmwrlosC1.a1, sgpmwrlosC1.b1
Description:
Several related and recurring problems with the SGP MWRs have been
reported dating back to 1999.  These problems were due to the
occurrence of blackbody signals (in counts) that were half of those
expected. The symptoms included noisy data (especially at Purcell),
spikes in the data (especially at Vici), negative brightness
temperatures, and apparent loss of serial communication between the
computer and the radiometer, which results in a self-termination of the
MWR program (especially at the CF).

Because these all initially appeared to be hardware-related problems,
the instrument mentor and SGP site operations personnel (1) repeatedly
cleaned and replaced the fiber optic comm. components, (2) swapped
radiometers, (3) sent radiometers back to Radiometrics for evaluation
(which has not revealed any instrument problems), and (4) reconfigured
the computer's operating system.  Despite several attempts to isolate
and correct it, the problem persisted.

It became apparent that some component of the Windows98 configuration
conflicted with the DOS-based MWR program or affected the serial port
or the contents of the serial port buffer. This problem was finally
corrected by upgrading the MWR software with a new Windows-compatible
program.
Measurements:sgp5mwravgC1.c1:
  • Averaged total liquid water along LOS path(liq)
  • Mean 23.8 GHz sky brightness temperature(tbsky23)
  • MWR column precipitable water vapor(vap)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)

sgpmwrlosC1.b1:
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • Averaged total liquid water along LOS path(liq)
  • MWR column precipitable water vapor(vap)
  • Mean 23.8 GHz sky brightness temperature(tbsky23)

sgp1mwravgC1.c1:
  • Mean 23.8 GHz sky brightness temperature(tbsky23)
  • Averaged total liquid water along LOS path(liq)
  • MWR column precipitable water vapor(vap)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)

sgpmwrlosC1.a1:
  • MWR column precipitable water vapor(vap)
  • Mean 23.8 GHz sky brightness temperature(tbsky23)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • Averaged total liquid water along LOS path(liq)


Back To Table of Contents

DQRID : D030312.2
Start DateStart TimeEnd DateEnd Time
02/28/2000030007/16/20022200
Subject:
SGP/MWR/B1 - Intermittent Negative Sky Brightness Temperatures
DataStreams:sgpmwrlosB1.a1, sgpmwrlosB1.b1
Description:
Several related and recurring problems with the SGP MWRs have been
reported dating back to 1999.  These problems were due to the
occurrence of blackbody signals (in counts) that were half of those
expected. The symptoms included noisy data (especially at Purcell),
spikes in the data (especially at Vici), negative brightness
temperatures, and apparent loss of serial communication between the
computer and the radiometer, which results in a self-termination of the
MWR program (especially at the CF).

Because these all initially appeared to be hardware-related problems,
the instrument mentor and SGP site operations personnel (1) repeatedly
cleaned and replaced the fiber optic comm. components, (2) swapped
radiometers, (3) sent radiometers back to Radiometrics for evaluation
(which has not revealed any instrument problems), and (4) reconfigured
the computer's operating system.  Despite several attempts to isolate
and correct it, the problem persisted.

It became apparent that some component of the Windows98 configuration
conflicted with the DOS-based MWR program or affected the serial port
or the contents of the serial port buffer. This problem was finally
corrected by upgrading the MWR software with a new Windows-compatible
program.
Measurements:sgpmwrlosB1.a1:
  • Mean 23.8 GHz sky brightness temperature(tbsky23)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • MWR column precipitable water vapor(vap)
  • Averaged total liquid water along LOS path(liq)

sgpmwrlosB1.b1:
  • Averaged total liquid water along LOS path(liq)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • MWR column precipitable water vapor(vap)
  • Mean 23.8 GHz sky brightness temperature(tbsky23)


Back To Table of Contents

DQRID : D030312.3
Start DateStart TimeEnd DateEnd Time
02/01/2000210007/09/20021700
Subject:
SGP/MWR/B4 - Intermittent Negative Sky Brightness Temperatures
DataStreams:sgpmwrlosB4.a1, sgpmwrlosB4.b1
Description:
Several related and recurring problems with the SGP MWRs have been
reported dating back to 1999.  These problems were due to the
occurrence of blackbody signals (in counts) that were half of those
expected. The symptoms included noisy data (especially at Purcell),
spikes in the data (especially at Vici), negative brightness
temperatures, and apparent loss of serial communication between the
computer and the radiometer, which results in a self-termination of the
MWR program (especially at the CF).

Because these all initially appeared to be hardware-related problems,
the instrument mentor and SGP site operations personnel (1) repeatedly
cleaned and replaced the fiber optic comm. components, (2) swapped
radiometers, (3) sent radiometers back to Radiometrics for evaluation
(which has not revealed any instrument problems), and (4) reconfigured
the computer's operating system.  Despite several attempts to isolate
and correct it, the problem persisted.

It became apparent that some component of the Windows98 configuration
conflicted with the DOS-based MWR program or affected the serial port
or the contents of the serial port buffer. This problem was finally
corrected by upgrading the MWR software with a new Windows-compatible
program.
Measurements:sgpmwrlosB4.b1:
  • Averaged total liquid water along LOS path(liq)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • Mean 23.8 GHz sky brightness temperature(tbsky23)
  • MWR column precipitable water vapor(vap)

sgpmwrlosB4.a1:
  • MWR column precipitable water vapor(vap)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • Mean 23.8 GHz sky brightness temperature(tbsky23)
  • Averaged total liquid water along LOS path(liq)


Back To Table of Contents

DQRID : D030312.4
Start DateStart TimeEnd DateEnd Time
12/23/1999060007/10/20021700
Subject:
SGP/MWR/B5 - Intermittent Negative Sky Brightness Temperatures
DataStreams:sgpmwrlosB5.a1, sgpmwrlosB5.b1
Description:
Several related and recurring problems with the SGP MWRs have been
reported dating back to 1999.  These problems were due to the
occurrence of blackbody signals (in counts) that were half of those
expected. The symptoms included noisy data (especially at Purcell),
spikes in the data (especially at Vici), negative brightness
temperatures, and apparent loss of serial communication between the
computer and the radiometer, which results in a self-termination of the
MWR program (especially at the CF).

Because these all initially appeared to be hardware-related problems,
the instrument mentor and SGP site operations personnel (1) repeatedly
cleaned and replaced the fiber optic comm. components, (2) swapped
radiometers, (3) sent radiometers back to Radiometrics for evaluation
(which has not revealed any instrument problems), and (4) reconfigured
the computer's operating system.  Despite several attempts to isolate
and correct it, the problem persisted.

It became apparent that some component of the Windows98 configuration
conflicted with the DOS-based MWR program or affected the serial port
or the contents of the serial port buffer. This problem was finally
corrected by upgrading the MWR software with a new Windows-compatible
program.
Measurements:sgpmwrlosB5.a1:
  • MWR column precipitable water vapor(vap)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • Mean 23.8 GHz sky brightness temperature(tbsky23)
  • Averaged total liquid water along LOS path(liq)

sgpmwrlosB5.b1:
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • Averaged total liquid water along LOS path(liq)
  • MWR column precipitable water vapor(vap)
  • Mean 23.8 GHz sky brightness temperature(tbsky23)


Back To Table of Contents

DQRID : D030312.5
Start DateStart TimeEnd DateEnd Time
12/02/1999180007/09/20022100
Subject:
SGP/MWR/B6 - Intermittent Negative Sky Brightness Temperatures
DataStreams:sgpmwrlosB6.a1, sgpmwrlosB6.b1
Description:
Several related and recurring problems with the SGP MWRs have been
reported dating back to 1999.  These problems were due to the
occurrence of blackbody signals (in counts) that were half of those
expected. The symptoms included noisy data (especially at Purcell),
spikes in the data (especially at Vici), negative brightness
temperatures, and apparent loss of serial communication between the
computer and the radiometer, which results in a self-termination of the
MWR program (especially at the CF).

Because these all initially appeared to be hardware-related problems,
the instrument mentor and SGP site operations personnel (1) repeatedly
cleaned and replaced the fiber optic comm. components, (2) swapped
radiometers, (3) sent radiometers back to Radiometrics for evaluation
(which has not revealed any instrument problems), and (4) reconfigured
the computer's operating system.  Despite several attempts to isolate
and correct it, the problem persisted.

It became apparent that some component of the Windows98 configuration
conflicted with the DOS-based MWR program or affected the serial port
or the contents of the serial port buffer. This problem was finally
corrected by upgrading the MWR software with a new Windows-compatible
program.
Measurements:sgpmwrlosB6.b1:
  • MWR column precipitable water vapor(vap)
  • Mean 23.8 GHz sky brightness temperature(tbsky23)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)
  • Averaged total liquid water along LOS path(liq)

sgpmwrlosB6.a1:
  • Averaged total liquid water along LOS path(liq)
  • MWR column precipitable water vapor(vap)
  • Mean 23.8 GHz sky brightness temperature(tbsky23)
  • Mean 31.4 GHz sky brightness temperature(tbsky31)


Back To Table of Contents

DQRID : D030822.2
Start DateStart TimeEnd DateEnd Time
10/28/1998000001/24/20031659
Subject:
SGP/MWR/B1  - min/max/delta values incorrect
DataStreams:sgpmwrlosB1.b1
Description:
The values of valid_min, valid_max, and valid_delta for fields tkxc and tknd were 
incorrect. They should be 303, 333, and 0.5 K, respectively.
Measurements:sgpmwrlosB1.b1:
  • (tknd)
  • Mixer kinetic (physical) temperature(tkxc)


Back To Table of Contents

DQRID : D030822.3
Start DateStart TimeEnd DateEnd Time
10/28/1998000002/10/20032359
Subject:
SGP/MWR/B4  - min/max/delta values incorrect
DataStreams:sgpmwrlosB4.b1
Description:
The values of valid_min, valid_max, and valid_delta for fields tkxc and tknd were 
incorrect. They should be 303, 333, and 0.5 K, respectively.
Measurements:sgpmwrlosB4.b1:
  • Mixer kinetic (physical) temperature(tkxc)
  • (tknd)


Back To Table of Contents

DQRID : D030822.4
Start DateStart TimeEnd DateEnd Time
01/16/1998000002/10/20032359
Subject:
SGP/MWR/B5  - min/max/delta values incorrect
DataStreams:sgpmwrlosB5.b1
Description:
The values of valid_min, valid_max, and valid_delta for fields tkxc and tknd were 
incorrect. They should be 303, 333, and 0.5 K, respectively.
Measurements:sgpmwrlosB5.b1:
  • (tknd)
  • Mixer kinetic (physical) temperature(tkxc)


Back To Table of Contents

DQRID : D030822.5
Start DateStart TimeEnd DateEnd Time
10/28/1998000002/10/20032359
Subject:
SGP/MWR/B6  - min/max/delta values incorrect
DataStreams:sgpmwrlosB6.b1
Description:
The values of valid_min, valid_max, and valid_delta for fields tkxc and tknd were 
incorrect. They should be 303, 333, and 0.5 K, respectively.
Measurements:sgpmwrlosB6.b1:
  • Mixer kinetic (physical) temperature(tkxc)
  • (tknd)


Back To Table of Contents

DQRID : D040526.2
Start DateStart TimeEnd DateEnd Time
07/22/1995001205/14/20032359
Subject:
SGP/AERI/C1 - Metadata errors
DataStreams:sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1, sgpaeri01engineerC1.a1, sgpaeri01summaryC1.a1,
sgpaerilblcloudsC1.c1, sgpaerilbldiffC1.c1, sgpaerilbldifflsC1.c1, sgpqmeaerilblC1.c1,
sgpqmeaerilbllsC1.c1, sgpqmeaerimeansC1.c1
Description:
The latitude, longitude and altitude of the AERI
were incorrectly entered into the ARM database.  
The correct location of the SGP.C1 AERI is:
   Lat: 36.606N
   Lon: 97.485W
   Alt:    316m
Measurements:sgpaeri01ch1C1.a1:
  • lat(lat)
  • Dummy altitude for Zeb(alt)
  • lon(lon)

sgpaerilbldiffC1.c1:
  • MFRSR channels(channel)
  • Dummy altitude for Zeb(alt)
  • lon(lon)

sgpaeri01summaryC1.a1:
  • lon(lon)
  • Dummy altitude for Zeb(alt)
  • lat(lat)

sgpqmeaerimeansC1.c1:
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • lon(lon)

sgpaeri01ch2C1.a1:
  • lat(lat)
  • lon(lon)
  • Dummy altitude for Zeb(alt)

sgpqmeaerilbllsC1.c1:
  • lat(lat)
  • Dummy altitude for Zeb(alt)
  • lon(lon)

sgpaerilbldifflsC1.c1:
  • lon(lon)
  • Dummy altitude for Zeb(alt)
  • lat(lat)

sgpqmeaerilblC1.c1:
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • lon(lon)

sgpaerilblcloudsC1.c1:
  • lon(lon)
  • Dummy altitude for Zeb(alt)
  • lat(lat)

sgpaeri01engineerC1.a1:
  • Dummy altitude for Zeb(alt)
  • lat(lat)
  • lon(lon)


Back To Table of Contents

DQRID : D040805.4
Start DateStart TimeEnd DateEnd Time
12/15/1998170710/12/20032359
Subject:
SGP/AERI/B1 - Increased radiative uncertainty during hot summer afternoons
DataStreams:sgpaerich1B1.a1, sgpaerich2B1.a1
Description:
The ambient temperature of the AERI enclosures at the boundary facilities
often exceeded 308 K during hot summer afternoons.  This threshold marked
the maximum end of the "acceptable" range of temperatures that the 
ambient blackbody should maintain.  The issue is that if the hot 
blackbody and ambient blackbody temperatures are too close together, then 
the radiative calibration becomes more uncertain.  It should be noted 
that the hot blackbody's temperature is maintained at roughly 333 K.  

Using the calibration equation, an uncertainty analysis was performed
to see how much "additional" uncertainty resulted in the AERI
observations when the ambient temperature was between 308-315 K (315 K
was the maximum temperature that the ambient blackbody reached during
the summer).  The analysis compared the radiative uncertainties from the
Hillsboro (B1) AERI (chosen at random) with the AERI-01 at the SGP/CF
over a 5-year period.  Plot1 (below) shows the time-series of ambient
blackbody temperatures for the two instruments, along with histograms to
show the distribution of the temperatures.  The boundary facility
instrument did suffer from higher temperatures in the summer
time periods.  Plot2 (bleow) shows the relative radiative uncertainty
for each instrument.  The CF instrument has a maximum radiative
uncertainty of around 0.18% during the summer, while the BF instrument's
maximum radiative uncertainty is about 0.25%.  This plot demonstrates
that the radiative uncertainty is significantly larger for the BF
instrument in the summer relative to the CF instrument.  However, the
absolute radiative accuracy for the AERI is specified to be better than
1% of the ambient radiance, and both the CF and the BF AERIs are well
within this uncertainty.  

In short, there is significantly higher radiative uncertainty in the
BF AERIs during the hot summer afternoons, but the uncertainty is well
within the specified accuracy of the instrument.

plot1:  aeri_abb_temp.lamont_hillsboro.png 

plot2:  aeri_relative_error.lamont_hillsboro.png 
Measurements:sgpaerich1B1.a1:
  • Mean of radiance spectra ensemble(mean_rad)

sgpaerich2B1.a1:
  • Mean of radiance spectra ensemble(mean_rad)


Back To Table of Contents

DQRID : D040806.2
Start DateStart TimeEnd DateEnd Time
12/15/1998200206/08/20032359
Subject:
SGP/AERI/B4 - Increased radiative uncertainty during hot summer afternoons
DataStreams:sgpaerich1B4.a1, sgpaerich2B4.a1
Description:
The ambient temperature of the AERI enclosures at the boundary facilities
often exceeded 308 K during hot summer afternoons.  This threshold marked
the maximum end of the "acceptable" range of temperatures that the 
ambient blackbody should maintain.  The issue is that if the hot 
blackbody and ambient blackbody temperatures are too close together, then 
the radiative calibration becomes more uncertain.  It should be noted 
that the hot blackbody's temperature is maintained at roughly 333 K.  

Using the calibration equation, an uncertainty analysis was performed
to see how much "additional" uncertainty resulted in the AERI
observations when the ambient temperature was between 308-315 K (315 K
was the maximum temperature that the ambient blackbody reached during
the summer).  The analysis compared the radiative uncertainties from the
Hillsboro (B1) AERI (chosen at random) with the AERI-01 at the SGP/CF
over a 5-year period.  Plot1 (below) shows the time-series of ambient
blackbody temperatures for the two instruments, along with histograms to
show the distribution of the temperatures.  The boundary facility
instrument did suffer from higher temperatures in the summer
time periods.  Plot2 (bleow) shows the relative radiative uncertainty
for each instrument.  The CF instrument has a maximum radiative
uncertainty of around 0.18% during the summer, while the BF instrument's
maximum radiative uncertainty is about 0.25%.  This plot demonstrates
that the radiative uncertainty is significantly larger for the BF
instrument in the summer relative to the CF instrument.  However, the
absolute radiative accuracy for the AERI is specified to be better than
1% of the ambient radiance, and both the CF and the BF AERIs are well
within this uncertainty.  

In short, there is significantly higher radiative uncertainty in the
BF AERIs during the hot summer afternoons, but the uncertainty is well
within the specified accuracy of the instrument.

plot1:  aeri_abb_temp.lamont_hillsboro.png 

plot2:  aeri_relative_error.lamont_hillsboro.png 
Measurements:sgpaerich2B4.a1:
  • Mean of radiance spectra ensemble(mean_rad)

sgpaerich1B4.a1:
  • Mean of radiance spectra ensemble(mean_rad)


Back To Table of Contents

DQRID : D040806.3
Start DateStart TimeEnd DateEnd Time
12/15/1998000810/12/20032359
Subject:
SGP/AERI/B5 - Increased radiative uncertainty during hot summer afternoons
DataStreams:sgpaerich1B5.a1, sgpaerich2B5.a1
Description:
The ambient temperature of the AERI enclosures at the boundary facilities
often exceeded 308 K during hot summer afternoons.  This threshold marked
the maximum end of the "acceptable" range of temperatures that the 
ambient blackbody should maintain.  The issue is that if the hot 
blackbody and ambient blackbody temperatures are too close together, then 
the radiative calibration becomes more uncertain.  It should be noted 
that the hot blackbody's temperature is maintained at roughly 333 K.  

Using the calibration equation, an uncertainty analysis was performed
to see how much "additional" uncertainty resulted in the AERI
observations when the ambient temperature was between 308-315 K (315 K
was the maximum temperature that the ambient blackbody reached during
the summer).  The analysis compared the radiative uncertainties from the
Hillsboro (B1) AERI (chosen at random) with the AERI-01 at the SGP/CF
over a 5-year period.  Plot1 (below) shows the time-series of ambient
blackbody temperatures for the two instruments, along with histograms to
show the distribution of the temperatures.  The boundary facility
instrument did suffer from higher temperatures in the summer
time periods.  Plot2 (bleow) shows the relative radiative uncertainty
for each instrument.  The CF instrument has a maximum radiative
uncertainty of around 0.18% during the summer, while the BF instrument's
maximum radiative uncertainty is about 0.25%.  This plot demonstrates
that the radiative uncertainty is significantly larger for the BF
instrument in the summer relative to the CF instrument.  However, the
absolute radiative accuracy for the AERI is specified to be better than
1% of the ambient radiance, and both the CF and the BF AERIs are well
within this uncertainty.  

In short, there is significantly higher radiative uncertainty in the
BF AERIs during the hot summer afternoons, but the uncertainty is well
within the specified accuracy of the instrument.

plot1:  aeri_abb_temp.lamont_hillsboro.png 

plot2:  aeri_relative_error.lamont_hillsboro.png 
Measurements:sgpaerich2B5.a1:
  • Mean of radiance spectra ensemble(mean_rad)

sgpaerich1B5.a1:
  • Mean of radiance spectra ensemble(mean_rad)


Back To Table of Contents

DQRID : D040806.5
Start DateStart TimeEnd DateEnd Time
11/17/1998231010/12/20032359
Subject:
SGP/AERI/B6 - Increased radiative uncertainty during hot summer afternoons
DataStreams:sgpaerich1B6.a1, sgpaerich2B6.a1
Description:
The ambient temperature of the AERI enclosures at the boundary facilities
often exceeded 308 K during hot summer afternoons.  This threshold marked
the maximum end of the "acceptable" range of temperatures that the 
ambient blackbody should maintain.  The issue is that if the hot 
blackbody and ambient blackbody temperatures are too close together, then 
the radiative calibration becomes more uncertain.  It should be noted 
that the hot blackbody's temperature is maintained at roughly 333 K.  

Using the calibration equation, an uncertainty analysis was performed
to see how much "additional" uncertainty resulted in the AERI
observations when the ambient temperature was between 308-315 K (315 K
was the maximum temperature that the ambient blackbody reached during
the summer).  The analysis compared the radiative uncertainties from the
Hillsboro (B1) AERI (chosen at random) with the AERI-01 at the SGP/CF
over a 5-year period.  Plot1 (below) shows the time-series of ambient
blackbody temperatures for the two instruments, along with histograms to
show the distribution of the temperatures.  The boundary facility
instrument did suffer from higher temperatures in the summer
time periods.  Plot2 (bleow) shows the relative radiative uncertainty
for each instrument.  The CF instrument has a maximum radiative
uncertainty of around 0.18% during the summer, while the BF instrument's
maximum radiative uncertainty is about 0.25%.  This plot demonstrates
that the radiative uncertainty is significantly larger for the BF
instrument in the summer relative to the CF instrument.  However, the
absolute radiative accuracy for the AERI is specified to be better than
1% of the ambient radiance, and both the CF and the BF AERIs are well
within this uncertainty.  

In short, there is significantly higher radiative uncertainty in the
BF AERIs during the hot summer afternoons, but the uncertainty is well
within the specified accuracy of the instrument.

plot1:  aeri_abb_temp.lamont_hillsboro.png 

plot2:  aeri_relative_error.lamont_hillsboro.png 
Measurements:sgpaerich1B6.a1:
  • Mean of radiance spectra ensemble(mean_rad)

sgpaerich2B6.a1:
  • Mean of radiance spectra ensemble(mean_rad)


Back To Table of Contents

DQRID : D040816.1
Start DateStart TimeEnd DateEnd Time
03/02/2000000005/10/20022359
Subject:
SGP/AERI/C1 - Data Reprocessed to correct laser wavenumber
DataStreams:sgpaeri01ch1C1.a1, sgpaeri01ch2C1.a1
Description:
SGP.C1 AERI data from 20000302-20020510 have been reprocessed
to correct for the spectral calibration; i.e., to correct the
laser wavenumber.  These data are now available from the ARM
Archive.

Data users who retrieved the previous version of this data from 
the archive should consider the following graphic to gauge the
impact the correction might have on their analyses.


vlaser_correction_example.png  

Note: only the ch1 and ch2 data were reprocessed; the summary
data have not been recomputed.  The summary data typically
are 5 to 25 cm-1 spectral averages of the ch1 and ch2 data,
and the effect of the spectral calibration on these averages
should be negligible.
Measurements:sgpaeri01ch1C1.a1:
  • Mean of radiance spectra ensemble(mean_rad)

sgpaeri01ch2C1.a1:
  • Mean of radiance spectra ensemble(mean_rad)


Back To Table of Contents

DQRID : D990124.2
Start DateStart TimeEnd DateEnd Time
05/27/1992000005/31/20022359
Subject:
SGP/SONDE - Dry bias in sonde RH
DataStreams:DsgpsondeB1.00, DsgpsondeB1.a0, DsgpsondeB1.a1, DsgpsondeB4.00, DsgpsondeB4.a0,
DsgpsondeB4.a1, DsgpsondeB5.00, DsgpsondeB5.a0, DsgpsondeB5.a1, DsgpsondeC1.00, DsgpsondeC1.a0,
DsgpsondeC1.a1, DsgpsondenogcptucalcB1.c1, DsgpsondenogcptucalcB4.c1,
DsgpsondenogcptucalcB5.c1, DsgpsondenogcptucalcC1.c1, DsgpsondenogcwrpnB1.c1, DsgpsondenogcwrpnB4.c1,
DsgpsondenogcwrpnB5.c1, DsgpsondenogcwrpnC1.c1, DsgpsondeptuB1.00, DsgpsondeptuB4.00,
DsgpsondeptuB5.00, DsgpsondeptuB6.00, DsgpsondeptuC1.00, DsgpsondeptucalcB1.c1,
DsgpsondeptucalcB4.c1, DsgpsondeptucalcB5.c1, DsgpsondeptucalcC1.c1, sgpsondeB1.00,
sgpsondeB1.a0, sgpsondeB1.a1, sgpsondeB4.00, sgpsondeB4.a0, sgpsondeB4.a1, sgpsondeB5.00,
sgpsondeB5.a0, sgpsondeB5.a1, sgpsondeB6.00, sgpsondeC1.00, sgpsondeC1.a0, sgpsondeC1.a1,
sgpsondeptuC1.00, sgpsondewnpnB1.a0, sgpsondewnpnB1.a1, sgpsondewnpnB4.a0,
sgpsondewnpnB4.a1, sgpsondewnpnB5.a0, sgpsondewnpnB5.a1, sgpsondewnpnB6.a0, sgpsondewnpnB6.a1,
sgpsondewnpnC1.a0, sgpsondewnpnC1.a1, sgpsondewnprC1.a0, sgpsondewnprC1.a1,
sgpsondewrpnB1.00, sgpsondewrpnB1.a0, sgpsondewrpnB1.a1, sgpsondewrpnB4.00, sgpsondewrpnB4.a0,
sgpsondewrpnB4.a1, sgpsondewrpnB5.00, sgpsondewrpnB5.a0, sgpsondewrpnB5.a1,
sgpsondewrpnB6.00, sgpsondewrpnB6.a0, sgpsondewrpnB6.a1, sgpsondewrpnC1.00, sgpsondewrpnC1.a0,
sgpsondewrpnC1.a1, sgpsondewrprB1.00, sgpsondewrprB1.a0, sgpsondewrprB1.a1,
sgpsondewrprB4.00, sgpsondewrprB4.a0, sgpsondewrprB4.a1, sgpsondewrprB5.00, sgpsondewrprB5.a0,
sgpsondewrprB5.a1, sgpsondewrprC1.00, sgpsondewrprC1.a0, sgpsondewrprC1.a1
Description:
Vaisala has confirmed ARM findings of an apparent dry bias in the
relative humidity measured by RS-80H radiosondes.  The cause of
the dry bias is thought to be contamination of the humidity sensor
by volatile organic substances originating from some plastic parts
of the radiosonde.  The amount of contamination is a function of
the time between the date of sonde manufacture and its use.  All
RS-80H sondes manufactured before week 34 of 1998 will show this
bias.  After week 34 of 1998 Vaisala changed its packaging to
reduce, but not eliminate the contamination problem.

Starting with RS-80 radiosonde manufactured in late June 2000 Vaisala
enclosed the sensor boom in an inert plastic shield, thereby eliminating
the contamination that caused the dry bias.

Starting in May 2001 at the SGP, May 2002 at the TWP, and later 2002
at the NSA, ARM has moved to using RS-90 radiosondes.  These sondes
are not subject to the contaminatino that caused the dry bias.

Vaisala is in the process of developing an algorithm that can be 
used to estimate the correct RH from knowledge of the sonde age.
All of the ARM sounding data have sufficient metadata available
to apply the correction.

Additionally, ARM has funded a Science Team effort (Milosevich) to
develop a 'best' correction algorithm for the RS-80 radiosonde humidity
data.  When completed this algorithm will allow us to reprocess the
accumulated RS-80 data and produce a new data platform with what we
hope will be more accurate data.
Measurements:sgpsondeB4.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

DsgpsondeB5.00:
  • (Development raw data stream - documentation not supported)

sgpsondewrpnC1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

sgpsondewnpnC1.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

DsgpsondeptuB6.00:
  • (Development raw data stream - documentation not supported)

DsgpsondenogcptucalcB1.c1:
  • (Development data stream - documentation not supported)

sgpsondewrpnB6.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

DsgpsondeptuC1.00:
  • (Development raw data stream - documentation not supported)

sgpsondewnprC1.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

DsgpsondenogcptucalcB5.c1:
  • (Development data stream - documentation not supported)

DsgpsondeptucalcC1.c1:
  • (Development data stream - documentation not supported)

sgpsondewnpnB4.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondeB6.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

sgpsondewrprB4.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

DsgpsondeptuB1.00:
  • (Development raw data stream - documentation not supported)

DsgpsondenogcptucalcC1.c1:
  • (Development data stream - documentation not supported)

sgpsondewrpnC1.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondewrpnB1.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewrprC1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

sgpsondewrpnB1.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondewrprB5.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondeB5.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewrprB5.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

DsgpsondeC1.00:
  • (Development raw data stream - documentation not supported)

sgpsondewrprB1.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondeB1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

sgpsondeptuC1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

DsgpsondenogcptucalcB4.c1:
  • (Development data stream - documentation not supported)

DsgpsondeB1.a0:
  • (Development data stream - documentation not supported)

DsgpsondeC1.a1:
  • (Development data stream - documentation not supported)

DsgpsondeptucalcB5.c1:
  • (Development data stream - documentation not supported)

sgpsondewrprB1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

sgpsondewrpnC1.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewrpnB1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

sgpsondeB1.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

DsgpsondeC1.a0:
  • (Development data stream - documentation not supported)

DsgpsondeB4.a1:
  • (Development data stream - documentation not supported)

DsgpsondeptuB4.00:
  • (Development raw data stream - documentation not supported)

sgpsondeB1.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondewrprB5.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondeC1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

sgpsondewnpnB1.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewrpnB6.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondewrprC1.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondeC1.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewrprC1.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

DsgpsondeptuB5.00:
  • (Development raw data stream - documentation not supported)

sgpsondewrpnB5.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewrprB4.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

DsgpsondeB1.a1:
  • (Development data stream - documentation not supported)

sgpsondeB5.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewnpnB6.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

DsgpsondeB5.a1:
  • (Development data stream - documentation not supported)

DsgpsondenogcwrpnB1.c1:
  • (Development data stream - documentation not supported)

sgpsondewrprB1.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondewrpnB5.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

DsgpsondeB4.a0:
  • (Development data stream - documentation not supported)

DsgpsondenogcwrpnB4.c1:
  • (Development data stream - documentation not supported)

DsgpsondeB5.a0:
  • (Development data stream - documentation not supported)

sgpsondewnpnB4.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondewnprC1.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondewrpnB5.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewnpnB5.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

DsgpsondeB4.00:
  • (Development raw data stream - documentation not supported)

sgpsondewrpnB6.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

sgpsondewrprB4.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewnpnB1.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondeB4.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondeC1.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondewrpnB4.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

DsgpsondenogcwrpnB5.c1:
  • (Development data stream - documentation not supported)

sgpsondewnpnC1.a0:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewrpnB4.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

DsgpsondeB1.00:
  • (Development raw data stream - documentation not supported)

sgpsondeB4.a0:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

sgpsondewnpnB6.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewrpnB4.a1:
  • Surface dew point temperature(dp)
  • Relative humidity inside the instrument enclosure(rh)

sgpsondewnpnB5.a1:
  • Relative humidity inside the instrument enclosure(rh)
  • Surface dew point temperature(dp)

DsgpsondeptucalcB4.c1:
  • (Development data stream - documentation not supported)

DsgpsondenogcwrpnC1.c1:
  • (Development data stream - documentation not supported)

sgpsondeB5.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

DsgpsondeptucalcB1.c1:
  • (Development data stream - documentation not supported)


Back To Table of Contents



END OF DATA