Data Quality Reports for Session: 108772 User: u1053957 Completed: 11/06/2007


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D050321.2SGP/TSI/C1 - Instrument failuresgptsiC1.00, sgptsicldmaskC1.a1, sgptsiskycoverC1.b1, sgptsiskyimageC1.a1
D050928.8SGP/TSI/C1 - Heater problemsgptsicldmaskC1.a1, sgptsiskycoverC1.b1, sgptsiskyimageC1.a1


DQRID : D050321.2
Start DateStart TimeEnd DateEnd Time
03/17/2005192504/05/20051630
Subject:
SGP/TSI/C1 - Instrument failure
DataStreams:sgptsiC1.00, sgptsicldmaskC1.a1, sgptsiskycoverC1.b1, sgptsiskyimageC1.a1
Description:
The TSI-880 experienced a power and/or computer failure. It was replaced with a spare 
TSI-440 and data collection resumed 4/5/05.  Note: this is a temporary replacement.
Measurements:sgptsicldmaskC1.a1:
  • PNG data stream - documentation not supported(png)

sgptsiskycoverC1.b1:
  • Time offset of tweaks from base_time(time_offset)
  • Pixel count: number total in sun circle(region.sun.count)
  • lon(lon)
  • Pixel count: number total indeterminant(count.unknown)
  • Sun altitude above horizon(solar.altitude)
  • Pixel count: box, outside mirror area(count.box)
  • Pixel count: number total opaque(count.opaque)
  • Dummy altitude for Zeb(alt)
  • Pixel count: number total in processed circle(count.sky)
  • base time(base_time)
  • Sunshine meter(sunny)
  • Pixel count: number total between horizon and processed circle(count.sub.proczen)
  • Percent opaque cloud(percent.opaque)
  • Pixel count: number total in zenith circle(region.zenith.count)
  • Relative \'strength\' of direct sun(sun.strength)
  • Pixel count: number thin in horizon area(region.horizon.count.thin)
  • Pixel count: number thin in sun circle(region.sun.count.thin)
  • Pixel count: number thin in zenith circle(region.zenith.count.thin)
  • Pixel count: number below horizon in image(count.sub.horz)
  • Pixel count: number total in horizon area(region.horizon.count)
  • lat(lat)
  • Pixel count: number opaque in zenith circle(region.zenith.count.opaque)
  • Pixel count: number opaque in horizon area(region.horizon.count.opaque)
  • Pixel count: number total thin(count.thin)
  • Pixel count: camera and sun strip mask(count.mask)
  • Solar azimuth angle(solar.azimuth)
  • Percentage thin cloud(percent.thin)
  • Pixel count: number opaque in sun circle(region.sun.count.opaque)

sgptsiC1.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

sgptsiskyimageC1.a1:
  • JPG data stream - documentation not supported(JPEG data stream - documentation not yet available)


Back To Table of Contents

DQRID : D050928.8
Start DateStart TimeEnd DateEnd Time
08/01/2005213510/06/20051650
Subject:
SGP/TSI/C1 - Heater problem
DataStreams:sgptsicldmaskC1.a1, sgptsiskycoverC1.b1, sgptsiskyimageC1.a1
Description:
The TSI was converted from a model 880 to 660 which requires separate power for the mirror 
heater. The heater was not powered during this period so morning dew and other 
condensation was not quickly evaporated.
Measurements:sgptsicldmaskC1.a1:
  • PNG data stream - documentation not supported(png)

sgptsiskycoverC1.b1:
  • Percent opaque cloud(percent.opaque)
  • Pixel count: number total thin(count.thin)
  • Percentage thin cloud(percent.thin)
  • Pixel count: number total opaque(count.opaque)

sgptsiskyimageC1.a1:
  • JPG data stream - documentation not supported(JPEG data stream - documentation not yet available)


Back To Table of Contents



END OF DATA