DQR ID | Subject | Data Streams Affected |
---|
D960506.1 | Bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960602.2 | bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960611.3 | bad surface values sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960701.4 | Bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960706.1 | Bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960913.1 | bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960913.2 | bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960913.3 | bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960913.5 | bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
D960927.2 | Bad surface pressure sounding | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1 |
Subject: | Bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1
|
Description: | DQR No: Platform: sgpsondeC1
Subject: Bad surface pressure sounding 05/04/96 05:29
Date Submitted: 5/06/96
Submitted By: _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other _____________________________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 5/06/96 Time 05:29 (GMT)
End Date Time (GMT)
Data should be labeled:
___ questionable ___ All data fields affected
_X_ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The surface pressure for this sounding was entered by the operator as 993.3
hPa. The first pressure value reported by the sonde is 964.0 hPa. The surface
pressure at 08:30 was 964.7 and at 11:31 was 954.3. It appears that the
operator entered the sea-level pressure rather than the station pressure.
The SMOS pressure during the period is in the 960-950 range.
Note that this will affect the altitude calculation throughout the sounding.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data. |
Measurements: | sgpsondewrpnC1.a0: - Retrieved pressure profile(pres)
- Relative humidity inside the instrument enclosure(rh)
- lat(lat)
- Mean Wind Speed(wspd)
- Ascent Rate(asc)
- Dummy altitude for Zeb(alt)
- Dry bulb temperature(tdry)
- lon(lon)
- Wind Status(wstat)
- Wind Direction(deg)
- Surface dew point temperature(dp)
- Time offset of tweaks from base_time(time_offset)
- base time(base_time)
sgpsondewrpnC1.a1: - lon(lon)
- V-component(v_wind)
- Ascent Rate(asc)
- Time offset of tweaks from base_time(time_offset)
- Wind Status(wstat)
- Relative humidity inside the instrument enclosure(rh)
- Dummy altitude for Zeb(alt)
- Wind Direction(deg)
- Retrieved pressure profile(pres)
- Dry bulb temperature(tdry)
- U-component(u_wind)
- base time(base_time)
- Surface dew point temperature(dp)
- Mean Wind Speed(wspd)
- lat(lat)
|
Subject: | bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1
|
Description: | DQR No: Platform: sgpsondeC1
Subject: Bad surface pressure sounding 05/29/96 20:31
Date Submitted: 6/2/96
Submitted By: _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other _____________________________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 05/29/96 Time 20:31 (GMT)
End Date Time (GMT)
Data should be labeled:
___ questionable ___ All data fields affected
_X_ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The surface pressure for this sounding was entered by the operator as 999.2
hPa. The first pressure value reported by the sonde is 978.2 hPa. The surface
pressure at 17:25 was 980.1 and at 05:30 (5/30) was 981.8. It appears that the
operator entered the sea-level pressure rather than the station pressure.
Note that this will affect the altitude calculation throughout the sounding.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data.
Data Processing Notes Date |
Measurements: | sgpsondewrpnC1.a0: - Retrieved pressure profile(pres)
- Relative humidity inside the instrument enclosure(rh)
- lat(lat)
- Mean Wind Speed(wspd)
- Ascent Rate(asc)
- Dummy altitude for Zeb(alt)
- Dry bulb temperature(tdry)
- lon(lon)
- Wind Status(wstat)
- Wind Direction(deg)
- Surface dew point temperature(dp)
- Time offset of tweaks from base_time(time_offset)
- base time(base_time)
sgpsondewrpnC1.a1: - lon(lon)
- V-component(v_wind)
- Ascent Rate(asc)
- Time offset of tweaks from base_time(time_offset)
- Wind Status(wstat)
- Relative humidity inside the instrument enclosure(rh)
- Dummy altitude for Zeb(alt)
- Wind Direction(deg)
- Retrieved pressure profile(pres)
- Dry bulb temperature(tdry)
- U-component(u_wind)
- base time(base_time)
- Surface dew point temperature(dp)
- Mean Wind Speed(wspd)
- lat(lat)
|
Subject: | bad surface values sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1
|
Description: | DQR No: Platform: sgpsondeC1
Subject: Bad surface values sounding 06/10/96 17:30
Date Submitted: 6/11/96
Submitted By: Barry Lesht _X_ Instrument Mentor
David Glahn ___ EST Member
___ Science Team Member
_X_ Other _Site Ops__________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 06/10/96 Time 17:30 (GMT)
End Date Time (GMT)
Data should be labeled:
___ questionable ___ All data fields affected
_X_ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The site operator inadvertently entered incorrect surface met values for
the subject sounding. Although he caught the error soon after launch
and reported it immediately, it was too late to correct. The following
table shows the incorrect (present in the file) and correct values.
Incorrect Correct
Pressure 1000.0 973.9
Temperature 35.0 30.5
Relative Humidity 27 30
The incorrect values of surface temperature and relative humidity will not
affect the other values in the sounding. The incorrect surface pressure
will, however, affect the altitude calculation throughout the sounding.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data. |
Measurements: | sgpsondewrpnC1.a0: - Retrieved pressure profile(pres)
- Relative humidity inside the instrument enclosure(rh)
- lat(lat)
- Mean Wind Speed(wspd)
- Ascent Rate(asc)
- Dummy altitude for Zeb(alt)
- Dry bulb temperature(tdry)
- lon(lon)
- Wind Status(wstat)
- Wind Direction(deg)
- Surface dew point temperature(dp)
- Time offset of tweaks from base_time(time_offset)
- base time(base_time)
sgpsondewrpnC1.a1: - lon(lon)
- V-component(v_wind)
- Ascent Rate(asc)
- Time offset of tweaks from base_time(time_offset)
- Wind Status(wstat)
- Relative humidity inside the instrument enclosure(rh)
- Dummy altitude for Zeb(alt)
- Wind Direction(deg)
- Retrieved pressure profile(pres)
- Dry bulb temperature(tdry)
- U-component(u_wind)
- base time(base_time)
- Surface dew point temperature(dp)
- Mean Wind Speed(wspd)
- lat(lat)
|
Subject: | Bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1
|
Description: | DQR No: Platform: sgpsondeC1
Subject: Bad surface pressure sounding 06/21/96 11:30
Date Submitted: 7/1/96
Submitted By: _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other _____________________________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 07/01/96 Time 11:30 (GMT)
End Date Time (GMT)
Data should be labeled:
___ questionable ___ All data fields affected
_X_ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The surface pressure for this sounding was entered by the operator as 996.4
hPa. The first pressure value reported by the sonde is 972.3 hPa. The surface
pressure at 05:30 was 972.3 and at 14:46 was 976.1. It appears that the
operator entered the sea-level pressure rather than the station pressure.
Note that this will affect the altitude calculation throughout the sounding.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data. |
Measurements: | sgpsondewrpnC1.a0: - Retrieved pressure profile(pres)
- Relative humidity inside the instrument enclosure(rh)
- lat(lat)
- Mean Wind Speed(wspd)
- Ascent Rate(asc)
- Dummy altitude for Zeb(alt)
- Dry bulb temperature(tdry)
- lon(lon)
- Wind Status(wstat)
- Wind Direction(deg)
- Surface dew point temperature(dp)
- Time offset of tweaks from base_time(time_offset)
- base time(base_time)
sgpsondewrpnC1.a1: - lon(lon)
- V-component(v_wind)
- Ascent Rate(asc)
- Time offset of tweaks from base_time(time_offset)
- Wind Status(wstat)
- Relative humidity inside the instrument enclosure(rh)
- Dummy altitude for Zeb(alt)
- Wind Direction(deg)
- Retrieved pressure profile(pres)
- Dry bulb temperature(tdry)
- U-component(u_wind)
- base time(base_time)
- Surface dew point temperature(dp)
- Mean Wind Speed(wspd)
- lat(lat)
|
Subject: | Bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1
|
Description: | DQR No: Platform: sgpsondeC1
Subject: Bad surface pressure sounding 07/04/96 17:28
Date Submitted: 7/6/96
Submitted By: _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other _____________________________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 07/04/96 Time 17:28 (GMT)
End Date Time (GMT)
Data should be labeled:
___ questionable ___ All data fields affected
_X_ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The surface pressure for this sounding was entered by the operator as 995.4
hPa. The first pressure value reported by the sonde is 970.1 hPa. The surface
pressure at 14:30 was 972.3 and at 20:27 was 971.1. It appears that the
operator entered the sea-level pressure rather than the station pressure.
Note that this will affect the altitude calculation throughout the sounding.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data.
Data Processing Notes Date |
Measurements: | sgpsondewrpnC1.a0: - Retrieved pressure profile(pres)
- Relative humidity inside the instrument enclosure(rh)
- lat(lat)
- Mean Wind Speed(wspd)
- Ascent Rate(asc)
- Dummy altitude for Zeb(alt)
- Dry bulb temperature(tdry)
- lon(lon)
- Wind Status(wstat)
- Wind Direction(deg)
- Surface dew point temperature(dp)
- Time offset of tweaks from base_time(time_offset)
- base time(base_time)
sgpsondewrpnC1.a1: - lon(lon)
- V-component(v_wind)
- Ascent Rate(asc)
- Time offset of tweaks from base_time(time_offset)
- Wind Status(wstat)
- Relative humidity inside the instrument enclosure(rh)
- Dummy altitude for Zeb(alt)
- Wind Direction(deg)
- Retrieved pressure profile(pres)
- Dry bulb temperature(tdry)
- U-component(u_wind)
- base time(base_time)
- Surface dew point temperature(dp)
- Mean Wind Speed(wspd)
- lat(lat)
|
Subject: | bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1
|
Description: | DQR No: Platform: sgpsondeC1
Subject: Bad surface pressure sounding C1 09/09/96:14:29
Date Submitted: 9/9/96
Submitted By: _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other _____________________________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 09/09/96 Time 14:29 (GMT)
End Date Time (GMT)
Data should be labeled:
____ questionable ___ All data fields affected
_X__ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The surface pressure for this sounding was entered by the operator as 1001.4
hPa. The first pressure value reported by the sonde is 979.7 hPa. It appears
that the operator incorrectly entered sea-level pressure obtained from the
WeatherMeasure set rather than surface pressure obtained from the radiosonde.
Note that this will affect the altitude calculation throughout the sounding.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data. |
Measurements: | sgpsondewrpnC1.a0: - Retrieved pressure profile(pres)
- Relative humidity inside the instrument enclosure(rh)
- lat(lat)
- Mean Wind Speed(wspd)
- Ascent Rate(asc)
- Dummy altitude for Zeb(alt)
- Dry bulb temperature(tdry)
- lon(lon)
- Wind Status(wstat)
- Wind Direction(deg)
- Surface dew point temperature(dp)
- Time offset of tweaks from base_time(time_offset)
- base time(base_time)
sgpsondewrpnC1.a1: - lon(lon)
- V-component(v_wind)
- Ascent Rate(asc)
- Time offset of tweaks from base_time(time_offset)
- Wind Status(wstat)
- Relative humidity inside the instrument enclosure(rh)
- Dummy altitude for Zeb(alt)
- Wind Direction(deg)
- Retrieved pressure profile(pres)
- Dry bulb temperature(tdry)
- U-component(u_wind)
- base time(base_time)
- Surface dew point temperature(dp)
- Mean Wind Speed(wspd)
- lat(lat)
|
Subject: | bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1
|
Description: | DQR No: Platform: sgpsondeC1
Subject: Bad surface pressure sounding C1 09/09/96:17:31
Date Submitted: 9/9/96
Submitted By: _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other _____________________________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 09/09/96 Time 17:31 (GMT)
End Date Time (GMT)
Data should be labeled:
____ questionable ___ All data fields affected
_X__ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The surface pressure for this sounding was entered by the operator as 1001.5
hPa. The first pressure value reported by the sonde is 978.9 hPa. It appears
that the operator incorrectly entered sea-level pressure obtained from the
WeatherMeasure set rather than surface pressure obtained from the radiosonde.
Note that this will affect the altitude calculation throughout the sounding.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data.
Data Processing Notes Date
----- End Included Message ----- |
Measurements: | sgpsondewrpnC1.a0: - Retrieved pressure profile(pres)
- Relative humidity inside the instrument enclosure(rh)
- lat(lat)
- Mean Wind Speed(wspd)
- Ascent Rate(asc)
- Dummy altitude for Zeb(alt)
- Dry bulb temperature(tdry)
- lon(lon)
- Wind Status(wstat)
- Wind Direction(deg)
- Surface dew point temperature(dp)
- Time offset of tweaks from base_time(time_offset)
- base time(base_time)
sgpsondewrpnC1.a1: - lon(lon)
- V-component(v_wind)
- Ascent Rate(asc)
- Time offset of tweaks from base_time(time_offset)
- Wind Status(wstat)
- Relative humidity inside the instrument enclosure(rh)
- Dummy altitude for Zeb(alt)
- Wind Direction(deg)
- Retrieved pressure profile(pres)
- Dry bulb temperature(tdry)
- U-component(u_wind)
- base time(base_time)
- Surface dew point temperature(dp)
- Mean Wind Speed(wspd)
- lat(lat)
|
Subject: | bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1
|
Description: | DQR No: Platform: sgpsondeC1
Subject: Bad surface pressure sounding C1 09/09/96:20:29
Date Submitted: 9/9/96
Submitted By: _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other _____________________________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 09/09/96 Time 20:29 (GMT)
End Date Time (GMT)
Data should be labeled:
____ questionable ___ All data fields affected
_X__ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The surface pressure for this sounding was entered by the operator as 999.4
hPa. The first pressure value reported by the sonde is 975.4 hPa. It appears
that the operator incorrectly entered sea-level pressure obtained from the
WeatherMeasure set rather than surface pressure obtained from the radiosonde.
Note that this will affect the altitude calculation throughout the sounding.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data. |
Measurements: | sgpsondewrpnC1.a0: - Retrieved pressure profile(pres)
- Relative humidity inside the instrument enclosure(rh)
- lat(lat)
- Mean Wind Speed(wspd)
- Ascent Rate(asc)
- Dummy altitude for Zeb(alt)
- Dry bulb temperature(tdry)
- lon(lon)
- Wind Status(wstat)
- Wind Direction(deg)
- Surface dew point temperature(dp)
- Time offset of tweaks from base_time(time_offset)
- base time(base_time)
sgpsondewrpnC1.a1: - lon(lon)
- V-component(v_wind)
- Ascent Rate(asc)
- Time offset of tweaks from base_time(time_offset)
- Wind Status(wstat)
- Relative humidity inside the instrument enclosure(rh)
- Dummy altitude for Zeb(alt)
- Wind Direction(deg)
- Retrieved pressure profile(pres)
- Dry bulb temperature(tdry)
- U-component(u_wind)
- base time(base_time)
- Surface dew point temperature(dp)
- Mean Wind Speed(wspd)
- lat(lat)
|
Subject: | bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1
|
Description: | DQR No: Platform: sgpsondeC1
Subject: Bad surface pressure sounding C1 09/12/96:0830
Date Submitted: 9/13/96
Submitted By: _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other _____________________________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 012/96 Time 08:30 (GMT)
End Date Time (GMT)
Data should be labeled:
____ questionable ___ All data fields affected
_X__ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The surface pressure for this sounding was entered by the operator as 987.7
hPa. The first pressure value reported by the sonde is 976.1 hPa. The
operator transposed the correct surface pressure 978.7 when entering the
data.
Note that this will affect the altitude calculation throughout the sounding.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data. |
Measurements: | sgpsondewrpnC1.a0: - Retrieved pressure profile(pres)
- Relative humidity inside the instrument enclosure(rh)
- lat(lat)
- Mean Wind Speed(wspd)
- Ascent Rate(asc)
- Dummy altitude for Zeb(alt)
- Dry bulb temperature(tdry)
- lon(lon)
- Wind Status(wstat)
- Wind Direction(deg)
- Surface dew point temperature(dp)
- Time offset of tweaks from base_time(time_offset)
- base time(base_time)
sgpsondewrpnC1.a1: - lon(lon)
- V-component(v_wind)
- Ascent Rate(asc)
- Time offset of tweaks from base_time(time_offset)
- Wind Status(wstat)
- Relative humidity inside the instrument enclosure(rh)
- Dummy altitude for Zeb(alt)
- Wind Direction(deg)
- Retrieved pressure profile(pres)
- Dry bulb temperature(tdry)
- U-component(u_wind)
- base time(base_time)
- Surface dew point temperature(dp)
- Mean Wind Speed(wspd)
- lat(lat)
|
Subject: | Bad surface pressure sounding |
DataStreams: | sgpsondewrpnC1.a0, sgpsondewrpnC1.a1
|
Description: | DQR No: Platform: sgpsondeC1
Subject: Bad surface pressure sounding C1 09/26/96:0828
Date Submitted: 9/27/96
Submitted By: _X_ Instrument Mentor
___ EST Member
___ Science Team Member
___ Other _____________________________
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.
Platform/Measurement: sgpsondewrpnC1/all
What level data: (raw,a0,a1,b1,c1 etc):
What location was the data collected at: CF
Period of time in question
Begin Date 09/27/96 Time 08:28 (GMT)
End Date Time (GMT)
Data should be labeled:
____ questionable ___ All data fields affected
_X__ incorrect _X_ Only some data fields affected
___ wrong calibration
___ others
Discussion of Problem:
The surface pressure for this sounding was entered by the operator as 976.1
hPa. Analysis of the raw data file suggests that the actual surface pressure
at time of launch was 967.1 hPa. It appears that the operator transposed
the correct surface pressure from 967.1 to 976.1 when entering the data.
Note that this will affect the altitude calculation throughout the sounding.
Other observations/measurements impacted by this problem:
None
Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)
Flag data. |
Measurements: | sgpsondewrpnC1.a0: - Retrieved pressure profile(pres)
- Relative humidity inside the instrument enclosure(rh)
- lat(lat)
- Mean Wind Speed(wspd)
- Ascent Rate(asc)
- Dummy altitude for Zeb(alt)
- Dry bulb temperature(tdry)
- lon(lon)
- Wind Status(wstat)
- Wind Direction(deg)
- Surface dew point temperature(dp)
- Time offset of tweaks from base_time(time_offset)
- base time(base_time)
sgpsondewrpnC1.a1: - lon(lon)
- V-component(v_wind)
- Ascent Rate(asc)
- Time offset of tweaks from base_time(time_offset)
- Wind Status(wstat)
- Relative humidity inside the instrument enclosure(rh)
- Dummy altitude for Zeb(alt)
- Wind Direction(deg)
- Retrieved pressure profile(pres)
- Dry bulb temperature(tdry)
- U-component(u_wind)
- base time(base_time)
- Surface dew point temperature(dp)
- Mean Wind Speed(wspd)
- lat(lat)
|