DQR ID | Subject | Data Streams Affected |
---|
D060426.8 | TWP/SMET/C3 - ORG data noisy due to degraded ground | twpsmet60sC3.b1 |
D060502.3 | TWP/SMET/C3 - Reprocessed: Lower windspeed sensor calibration error | twpsmet60sC3.b1 |
D060627.1 | TWP/SMET/C3 - Data not representative | twpsmet60sC3.b1 |
D061011.4 | TWP/SMET/C3 - Reprocess: Tipping bucket rain gauge added | twpsmet60sC3.b1 |
D061220.35 | TWP/ARSCL/C3 - Reprocess: ARSCL CloudBasePrecipitation field incorrect | twparscl1clothC3.c1, twparsclcbh1clothC3.c1, twpmmcrmode1bl200511041clothC3.c1, twpmmcrmode2ci200511041clothC3.c1, twpmmcrmode3ge200511041clothC3.c1, twpmmcrmode4pr200511041clothC3.c1 |
D070306.2 | TWP/SMET/C3 - Barometer Data Incorrect | twpsmet60sC3.b1 |
D070306.3 | TWP/SMET/C3 - Water in enclosure | twpsmet60sC3.b1 |
D070504.1 | TWP/ARSCL/C3 - Reprocess: MMCR Height offset affects ARSCL cloud boundaries | twparscl1clothC3.c1, twparsclbnd1clothC3.c1, twpmmcrmode1bl200511041clothC3.c1, twpmmcrmode2ci200511041clothC3.c1, twpmmcrmode3ge200511041clothC3.c1, twpmmcrmode4pr200511041clothC3.c1 |
D070803.1 | TWP/SMET/C3 - Upper wind speed artificially slow | twpsmet60sC3.b1 |
D071105.1 | TWP/SMET/C3 - ORG overestimated rainfall | twpsmet60sC3.b1 |
D080922.5 | TWP/SMET/C3 - Missing data | twpsmet60sC3.b1 |
Subject: | TWP/SMET/C3 - Data not representative |
DataStreams: | twpsmet60sC3.b1
|
Description: | The Anemometer readings were incorrect due to the tower being lowered for maintenance. |
Measurements: | twpsmet60sC3.b1: - Lower sensor, wind speed standard deviation(lo_spd_sd)
- Lower sensor, wind speed minimum(lo_spd_min)
- Lower sensor, wind speed maximum(lo_spd_max)
- Upper sensor, wind speed arithmetic average(up_spd_arith_avg)
- Lower sensor, wind speed vector average(lo_spd_vec_avg)
- Upper sensor, wind direction vector average(up_dir_vec_avg)
- Lower sensor, wind direction standard deviation(lo_dir_sd)
- Upper sensor, wind speed maximum(up_spd_max)
- Lower sensor, wind direction vector average(lo_dir_vec_avg)
- Upper sensor, wind speed minimum(up_spd_min)
- Upper sensor, wind direction standard deviation(up_dir_sd)
- Lower sensor, wind speed arithmetic average(lo_spd_arith_avg)
- Upper sensor, wind speed standard deviation(up_spd_sd)
- Upper sensor, wind speed vector average(up_spd_vec_avg)
|
Subject: | TWP/ARSCL/C3 - Reprocess: ARSCL CloudBasePrecipitation field incorrect |
DataStreams: | twparscl1clothC3.c1, twparsclcbh1clothC3.c1, twpmmcrmode1bl200511041clothC3.c1, twpmmcrmode2ci200511041clothC3.c1, twpmmcrmode3ge200511041clothC3.c1, twpmmcrmode4pr200511041clothC3.c1
|
Description: | The CloudBasePrecipitation field is incorrect and has no physical meaning. An ARSCL
processing error occurred when the smet60s data stream format changed, causing the wrong data
field to be used to supply precipitation measurements to the ARSCL VAP. The error caused
no significant degradation in other ARSCL fields, since manual quality control corrected
any related errors. |
Measurements: | twparsclcbh1clothC3.c1: - Microwave Radiometer Wet Window/Optical Rain Gauge Cloud Base Height(CloudBasePrecipitation)
twpmmcrmode4pr200511041clothC3.c1: - Microwave Radiometer Wet Window/Optical Rain Gauge Cloud Base Height(CloudBasePrecipitation)
twpmmcrmode2ci200511041clothC3.c1: - Microwave Radiometer Wet Window/Optical Rain Gauge Cloud Base Height(CloudBasePrecipitation)
twpmmcrmode3ge200511041clothC3.c1: - Microwave Radiometer Wet Window/Optical Rain Gauge Cloud Base Height(CloudBasePrecipitation)
twparscl1clothC3.c1: - Microwave Radiometer Wet Window/Optical Rain Gauge Cloud Base Height(CloudBasePrecipitation)
twpmmcrmode1bl200511041clothC3.c1: - Microwave Radiometer Wet Window/Optical Rain Gauge Cloud Base Height(CloudBasePrecipitation)
|
Subject: | TWP/ARSCL/C3 - Reprocess: MMCR Height offset affects ARSCL cloud boundaries |
DataStreams: | twparscl1clothC3.c1, twparsclbnd1clothC3.c1, twpmmcrmode1bl200511041clothC3.c1, twpmmcrmode2ci200511041clothC3.c1, twpmmcrmode3ge200511041clothC3.c1, twpmmcrmode4pr200511041clothC3.c1
|
Description: | MMCR heights were recorded as being too high by the following amounts:
Mode 1: 24.8756 m too high
Mode 2: 25.6249 m too high
Mode 3: 33.1176 m too high
Mode 4: 33.1176 m too high
These errors may affect cloud boundaries that are determined by combining MMCR and MPL
measurements; radar moments heights will be off by these amounts also.
NOTE: reprocessing is underway. 20060101-20060228 have been reprocessed and archived.
These data cover the period of TWP-ICE. |
Measurements: | twpmmcrmode2ci200511041clothC3.c1: - Height of Center of Each Range Bin(Heights)
twparsclbnd1clothC3.c1: - Bottom Height of Hydrometeor Layer from Composite (MMCR/Campbell et al. MPL)
Algorithms(CloudLayerBottomHeightMplCamp) - Top Height of Hydrometeor Layer from Composite (MMCR/Clothiaux et al. MPL)
Algorithms(CloudLayerTopHeightMplCloth) - Bottom Height of Hydrometeor Layer from Composite (MMCR/Clothiaux et al. MPL)
Algorithms(CloudLayerBottomHeightMplCloth) - Top Height of Hydrometeor Layer from Composite (MMCR/Campbell et al. MPL)
Algorithms(CloudLayerTopHeightMplCamp)
twpmmcrmode4pr200511041clothC3.c1: - Height of Center of Each Range Bin(Heights)
twpmmcrmode3ge200511041clothC3.c1: - Height of Center of Each Range Bin(Heights)
twparscl1clothC3.c1: - Height of Center of Each Range Bin(Heights)
- Bottom Height of Hydrometeor Layer from Composite (MMCR/Clothiaux et al. MPL)
Algorithms(CloudLayerBottomHeightMplCloth) - Top Height of Hydrometeor Layer from Composite (MMCR/Clothiaux et al. MPL)
Algorithms(CloudLayerTopHeightMplCloth) - Top Height of Hydrometeor Layer from Composite (MMCR/Campbell et al. MPL)
Algorithms(CloudLayerTopHeightMplCamp) - Bottom Height of Hydrometeor Layer from Composite (MMCR/Campbell et al. MPL)
Algorithms(CloudLayerBottomHeightMplCamp)
twpmmcrmode1bl200511041clothC3.c1: - Height of Center of Each Range Bin(Heights)
|
Subject: | TWP/SMET/C3 - Missing data |
DataStreams: | twpsmet60sC3.b1
|
Description: | Data are missing and unrecoverable. |
Measurements: | twpsmet60sC3.b1: - time(time)
- lat(lat)
- Lower sensor, wind speed minimum(lo_spd_min)
- Time offset of tweaks from base_time(time_offset)
- Precipitation maximum(precip_max)
- Battery Voltage(internal_voltage)
- Logger panel temperature(logger_temp)
- Lower sensor, wind direction standard deviation(lo_dir_sd)
- precipitation minimum(precip_min)
- Upper sensor, wind speed maximum(up_spd_max)
- Tipping bucket raingauge total(tbrg_total)
- Mean Air Temperature or Hardware Error(temp_mean)
- Vapor pressure mean(vappress_mean)
- Upper sensor, wind direction standard deviation(up_dir_sd)
- Lower sensor, wind speed arithmetic average(lo_spd_arith_avg)
- Barometric Pressure(atmos_pressure)
- Lower sensor, wind speed standard deviation(lo_spd_sd)
- Vapor pressure standard deviation(vappress_sd)
- Mean Relative Humidity(relh_mean)
- Lower sensor, wind speed maximum(lo_spd_max)
- Upper sensor, wind speed arithmetic average(up_spd_arith_avg)
- Lower sensor, wind speed vector average(lo_spd_vec_avg)
- Upper sensor, wind direction vector average(up_dir_vec_avg)
- Std Dev of Relative Humidity or Hardware Error Code(relh_sd)
- Precipitation mean(precip_mean)
- Lower sensor, wind direction vector average(lo_dir_vec_avg)
- base time(base_time)
- Dummy altitude for Zeb(alt)
- Precipitation standard deviation(precip_sd)
- lon(lon)
- Upper sensor, wind speed minimum(up_spd_min)
- Tipping bucket raingauge count total(tbrg_count_total)
- Upper sensor, wind speed vector average(up_spd_vec_avg)
- Std Dev of Air Temperature(temp_sd)
- Upper sensor, wind speed standard deviation(up_spd_sd)
|