DQR ID | Subject | Data Streams Affected |
---|---|---|
D050331.3 | PYE/MPL/M1 - wrong temperature calibration | pyemplM1.a1 |
D060317.1 | PYE/MPL/M1 - Erroneous temperatures | pyemplM1.a1 |
D060502.2 | PYE/GNDRAD/M1 - Reprocessed: IRT configuration and calibration | pyegndrad20sM1.a0, pyegndrad60sM1.b1 |
Start Date | Start Time | End Date | End Time |
---|---|---|---|
02/22/2005 | 0000 | 05/05/2005 | 2359 |
Subject: | PYE/MPL/M1 - wrong temperature calibration |
DataStreams: | pyemplM1.a1 |
Description: | Wrong calibration coefficients were applied to the temperature values. These are engineering housekeeping data only. The scientifically relevant measurements were unaffected. |
Measurements: | pyemplM1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
02/22/2005 | 0000 | 03/15/2005 | 2359 |
Subject: | PYE/MPL/M1 - Erroneous temperatures |
DataStreams: | pyemplM1.a1 |
Description: | The temperature readings for the laser, detector, and instrument are erroneous. Incorrect calibration factors; data should not be used. This time period is prior to the official start of the PYE deployment. |
Measurements: | pyemplM1.a1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
02/17/2005 | 1821 | 03/11/2005 | 2032 |
Subject: | PYE/GNDRAD/M1 - Reprocessed: IRT configuration and calibration |
DataStreams: | pyegndrad20sM1.a0, pyegndrad60sM1.b1 |
Description: | The configuration of the IRT was inadvertently set to default and the program of the data loggers were changed to that used at TWP.C3. This caused the calibration of the data to be wrong. It was corrected by reconfiguring the IRT and changing the conversion factors in the data logger program. These data have been reprocessed to apply correct calibrations and the reprocessed data were archived 20070212. |
Measurements: | pyegndrad60sM1.b1:
pyegndrad20sM1.a0:
|