DQR ID | Subject | Data Streams Affected |
---|---|---|
D060113.1 | TWP/VCEIL/C3 - low receiver sensitivity | twpvceil25kC3.b1 |
D100215.6 | TWP/VCEIL/C3 - Reprocess: Incorrect serial_number and sum_backscatter fields | twpvceil25kC3.b1 |
Start Date | Start Time | End Date | End Time |
---|---|---|---|
12/12/2005 | 0555 | 05/18/2006 | 2300 |
Subject: | TWP/VCEIL/C3 - low receiver sensitivity |
DataStreams: | twpvceil25kC3.b1 |
Description: | The ceilometer reported frequent receiver alarms. There are periods when the receiver sensitivity dropped to about 50%. The problem was corrected by replacing the instrument with a spare. |
Measurements: | twpvceil25kC3.b1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
02/27/2002 | 0000 | 10/31/2009 | 2359 |
Subject: | TWP/VCEIL/C3 - Reprocess: Incorrect serial_number and sum_backscatter fields |
DataStreams: | twpvceil25kC3.b1 |
Description: | Attribute serial_number: In most cases, this field is not representative of the actual serial number of the instrument because the value did not change when an instrument changed locations or was replaced with a spare. Variable sum_backscatter: An out-of-range condition for the "sum of detected and normalized backscatter" was reported as 0 instead of missing (-9999). The valid range is 0 - 0.0999 /srad. This DQR also applies to a1 level data. |
Measurements: | twpvceil25kC3.b1:
|