DQR ID | Subject | Data Streams Affected |
---|---|---|
D121116.1 | SGP/SIRS/E31 - Incorrect calibration coefficients | sgpsirs20sE31.a0, sgpsirsE31.b1 |
D121119.2 | SGP/SIRS/E33 - Incorrect calibration coefficients | sgpsirs20sE33.a0, sgpsirsE33.b1 |
D121119.3 | SGP/SIRS/E34 - Incorrect calibration coefficients | sgpsirs20sE34.a0, sgpsirsE34.b1 |
D121119.4 | SGP/SIRS/E35 - Incorrect calibration coefficients | sgpsirs20sE35.a0, sgpsirsE35.b1 |
D121119.5 | SGP/SIRS/E36 - Incorrect calibration coefficients | sgpsirs20sE36.a0, sgpsirsE36.b1 |
D121119.6 | SGP/SIRS/E37 - Incorrect calibration coefficients | sgpsirs20sE37.a0, sgpsirsE37.b1 |
D121119.7 | SGP/SIRS/E38 - Incorrect calibration coefficients | sgpsirs20sE38.a0, sgpsirsE38.b1 |
Start Date | Start Time | End Date | End Time |
---|---|---|---|
10/13/2011 | 0000 | 09/24/2012 | 1655 |
Subject: | SGP/SIRS/E31 - Incorrect calibration coefficients |
DataStreams: | sgpsirs20sE31.a0, sgpsirsE31.b1 |
Description: | During the time range specified the UIR and DIR serial numbers are correct but incorrect calibration coefficients were applied in the datalogger. The incoming longwave UIR and DIR must be recomputed using the new k1 calibration coefficient supplied and applied to the raw data in the corresponding SIRS 20s datastream. The start time corresponds to the first available data in the Archive. However, repro job should start on first available data from the station. |
Measurements: | sgpsirs20sE31.a0:
sgpsirsE31.b1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
08/17/2011 | 0000 | 08/14/2012 | 1600 |
Subject: | SGP/SIRS/E33 - Incorrect calibration coefficients |
DataStreams: | sgpsirs20sE33.a0, sgpsirsE33.b1 |
Description: | During the time range specified the UIR and DIR serial numbers are correct but incorrect calibration coefficients were applied in the datalogger. The incoming longwave UIR and DIR must be recomputed using the new k1 calibration coefficient supplied and applied to the raw data in the corresponding SIRS 20s datastream. The start time corresponds to the first available data in the Archive. However, repro job should start on first available data from the station. |
Measurements: | sgpsirs20sE33.a0:
sgpsirsE33.b1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
09/02/2011 | 0000 | 09/25/2012 | 1800 |
Subject: | SGP/SIRS/E34 - Incorrect calibration coefficients |
DataStreams: | sgpsirs20sE34.a0, sgpsirsE34.b1 |
Description: | During the time range specified the UIR and DIR serial numbers are correct but incorrect calibration coefficients were applied in the datalogger. The incoming longwave UIR and DIR must be recomputed using the new k1 calibration coefficient supplied and applied to the raw data in the corresponding SIRS 20s datastream. The start time corresponds to the first available data in the Archive. However, repro job should start on first available data from the station. |
Measurements: | sgpsirsE34.b1:
sgpsirs20sE34.a0:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
10/05/2011 | 0000 | 10/02/2012 | 1935 |
Subject: | SGP/SIRS/E35 - Incorrect calibration coefficients |
DataStreams: | sgpsirs20sE35.a0, sgpsirsE35.b1 |
Description: | During the time range specified the UIR and DIR serial numbers are correct but incorrect calibration coefficients were applied in the datalogger. The incoming longwave UIR and DIR must be recomputed using the new k1 calibration coefficient supplied and applied to the raw data in the corresponding SIRS 20s datastream. The start time corresponds to the first available data in the Archive. However, repro job should start on first available data from the station. |
Measurements: | sgpsirs20sE35.a0:
sgpsirsE35.b1:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
09/28/2011 | 0000 | 10/04/2012 | 1813 |
Subject: | SGP/SIRS/E36 - Incorrect calibration coefficients |
DataStreams: | sgpsirs20sE36.a0, sgpsirsE36.b1 |
Description: | During the time range specified the UIR and DIR serial numbers are correct but incorrect calibration coefficients were applied in the datalogger. The incoming longwave UIR and DIR must be recomputed using the new k1 calibration coefficient supplied and applied to the raw data in the corresponding SIRS 20s datastream. The start time corresponds to the first available data in the Archive. However, repro job should start on first available data from the station. |
Measurements: | sgpsirsE36.b1:
sgpsirs20sE36.a0:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
09/28/2011 | 0000 | 10/01/2012 | 1908 |
Subject: | SGP/SIRS/E37 - Incorrect calibration coefficients |
DataStreams: | sgpsirs20sE37.a0, sgpsirsE37.b1 |
Description: | During the time range specified the UIR and DIR serial numbers are correct but incorrect calibration coefficients were applied in the datalogger. The incoming longwave UIR and DIR must be recomputed using the new k1 calibration coefficient supplied and applied to the raw data in the corresponding SIRS 20s datastream. The start time corresponds to the first available data in the Archive. However, repro job should start on first available data from the station. |
Measurements: | sgpsirsE37.b1:
sgpsirs20sE37.a0:
|
Start Date | Start Time | End Date | End Time |
---|---|---|---|
08/23/2011 | 0000 | 10/02/2012 | 1712 |
Subject: | SGP/SIRS/E38 - Incorrect calibration coefficients |
DataStreams: | sgpsirs20sE38.a0, sgpsirsE38.b1 |
Description: | During the time range specified the UIR and DIR serial numbers are correct but incorrect calibration coefficients were applied in the datalogger. The incoming longwave UIR and DIR must be recomputed using the new k1 calibration coefficient supplied and applied to the raw data in the corresponding SIRS 20s datastream. The start time corresponds to the first available data in the Archive. However, repro job should start on first available data from the station. |
Measurements: | sgpsirs20sE38.a0:
sgpsirsE38.b1:
|