DQR ID | Subject | Data Streams Affected | Data Quality Metric |
---|---|---|---|
D140205.1 | TMP/MET/M1 - ORG not functional | tmpmetM1.b1 | Incorrect |
D140326.5 | TMP/MET/M1 - Wind sensor siting not ideal | tmpmetM1.b1 | Does not affect quality |
D140728.2 | TMP/MET/M1 - Barometer inlet blocked | tmpmetM1.b1 | Suspect |
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
01/23/2014 | 0000 | 01/31/2014 | 2200 | Incorrect |
02/04/2014 | 0740 | 02/04/2014 | 0750 | Incorrect |
Subject: | TMP/MET/M1 - ORG not functional |
DataStreams: | tmpmetM1.b1 |
Description: | Optical rain gauge was not reporting precipitation until 1/31. Precipitation recorded at 7:40gmt on 2/4 is not representative of conditions (sensor test). |
Measurements: | tmpmetM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
01/23/2014 | 0000 | 09/13/2014 | 2359 | Does not affect quality |
Subject: | TMP/MET/M1 - Wind sensor siting not ideal |
DataStreams: | tmpmetM1.b1 |
Description: | According to the manual, the wind sensor should ideally be mounted higher than any object within a 300 meter radius. This particular site is bordered by approximately 20 meter tall trees (the wind sensor is mounted at 10 meters) from about due west to south/southeast, at a distance approximately 60 meters or less. Please reference the instrument handbook or contact the mentor for more information. |
Measurements: | tmpmetM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
07/09/2014 | 1200 | 07/27/2014 | 0633 | Suspect |
Subject: | TMP/MET/M1 - Barometer inlet blocked |
DataStreams: | tmpmetM1.b1 |
Description: | A blockage occurred in the barometer inlet tubing, causing data to cycle up to .5 kPa from minute-to-minute. |
Measurements: | tmpmetM1.b1:
|