DQR ID | Subject | Data Streams Affected | Data Quality Metric |
---|---|---|---|
D150211.2 | MAG/AOS/ALL/M1/S1/S2 - Ship in port | magsaszenirM1.a1, magsaszefilterbandsM1.a1 | Suspect |
D150404.1 | ENA/RAIN/C1 - Missing Data | enarainwbC1.b1, enarainwbC1.00, enarainwbC1.a1 | Missing |
D150619.6 | MAO/ACSM/S1 - Noise in data | maoaosacsmS1.b1 | Suspect |
D150702.5 | MAG/AOS/M1 - Reprocess: reprocessing from raw data in preparation for not-yet-released b1 level | magaosimpactorM1.00 | Does not affect quality |
D150826.2 | ENA/RAIN/C1 - Noisy Data | enarainwbC1.b1, enarainwbC1.00, enarainwbC1.a1 | Incorrect |
D151019.5 | MAO/ACSM/S1 - critical orifice clog and resulting noise issues | maoaosacsmS1.b1 | Incorrect |
D160210.11 | ENA/RL/C1 - Missing Data | enarllogC1.a0 | Missing |
D160222.7 | ENA/MFRSR/C1 - Heater not working - connector issue | enamfrsrlangleyC1.c1, enamfrsrlangplotC1.c1 | Incorrect |
D160226.2 | ENA/MWR3C/C1 - Missing data | enamwr3ctipC1.a1 | Missing |
D160520.10 | ENA/DL/DLPROF/C1 - Reprocess: Incorrect serial number | enadlrhiC1.b1, enadlprofwstats4newsC1.c1 | Does not affect quality |
D160609.4 | GEC/OMI/X1 - Missing data | gecomireflX1.00, gecomiozoneX1.00, gecomiaerosolindexX1.00 | Missing |
D160621.11 | ENA/MFRSR/C1 - Shading Problem | enamfrsrlangleyC1.c1, enamfrsrlangplotC1.c1 | Incorrect |
D160902.3 | ENA/MFRSR/C1 - Heater Problem, connector issue | enamfrsrlangleyC1.c1, enamfrsrlangplotC1.c1 | Incorrect |
D160907.6 | ENA/MWR3C/C1 - Data system upgrade | enamwr3ctipC1.a1 | Missing |
D160909.18 | ENA/MFRSR/C1 - Missing data | enamfrsrlangleyC1.c1, enamfrsrlangplotC1.c1 | Missing |
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
08/29/2013 | 1248 | 08/31/2013 | 1220 | Suspect |
08/01/2013 | 1247 | 08/03/2013 | 1410 | Suspect |
11/01/2012 | 1314 | 11/03/2012 | 1757 | Suspect |
07/12/2013 | 0601 | 07/13/2013 | 1218 | Suspect |
06/06/2013 | 1240 | 06/08/2013 | 1125 | Suspect |
09/20/2012 | 1327 | 09/22/2012 | 1223 | Suspect |
11/08/2012 | 1330 | 11/09/2012 | 1732 | Suspect |
01/03/2013 | 0635 | 01/05/2013 | 0523 | Suspect |
10/25/2012 | 0612 | 10/26/2012 | 0650 | Suspect |
11/30/2012 | 0130 | 12/01/2012 | 1332 | Suspect |
08/15/2013 | 1312 | 08/17/2013 | 1902 | Suspect |
05/30/2013 | 0538 | 05/31/2013 | 1148 | Suspect |
11/22/2012 | 0615 | 11/24/2012 | 1105 | Suspect |
10/04/2012 | 1359 | 10/06/2012 | 1132 | Suspect |
09/26/2013 | 1319 | 09/28/2013 | 1135 | Suspect |
08/22/2013 | 0907 | 08/23/2013 | 1747 | Suspect |
06/13/2013 | 0545 | 06/14/2013 | 1705 | Suspect |
09/12/2013 | 1340 | 09/14/2013 | 1305 | Suspect |
07/18/2013 | 2232 | 07/20/2013 | 1252 | Suspect |
05/16/2013 | 0535 | 05/17/2013 | 1704 | Suspect |
09/12/2012 | 1255 | 09/14/2012 | 2326 | Suspect |
06/27/2013 | 0650 | 06/28/2013 | 1759 | Suspect |
12/20/2012 | 0738 | 12/22/2012 | 0847 | Suspect |
12/06/2012 | 0842 | 12/07/2012 | 0820 | Suspect |
07/25/2013 | 0507 | 07/26/2013 | 1342 | Suspect |
09/27/2012 | 0533 | 09/28/2012 | 0952 | Suspect |
06/20/2013 | 1303 | 06/22/2013 | 1205 | Suspect |
05/23/2013 | 1323 | 05/25/2013 | 1204 | Suspect |
07/03/2013 | 2232 | 07/07/2013 | 1800 | Suspect |
08/08/2013 | 0459 | 08/09/2013 | 1040 | Suspect |
09/05/2013 | 0548 | 09/06/2013 | 1248 | Suspect |
10/03/2013 | 0545 | 10/04/2013 | 1038 | Suspect |
12/13/2012 | 1440 | 12/15/2012 | 1351 | Suspect |
10/11/2012 | 0600 | 10/12/2012 | 0850 | Suspect |
12/27/2012 | 2334 | 12/29/2012 | 1306 | Suspect |
11/15/2012 | 1430 | 11/17/2012 | 1315 | Suspect |
10/18/2012 | 1318 | 10/20/2012 | 1128 | Suspect |
09/19/2013 | 0536 | 09/20/2013 | 1150 | Suspect |
Subject: | MAG/AOS/ALL/M1/S1/S2 - Ship in port |
DataStreams: | magsaszenirM1.a1, magsaszefilterbandsM1.a1 |
Description: | The ship was in port during these periods and the measurements may be affected by various sources (overhead cranes, anthropogenic sources, etc). Note: Dates and times were found by looking at the NAV datastream. The standard deviation of pitch, roll, and surge velocity were used to determine when the ship was slowing down to enter port or speeding up to leave port. Thresholds used; pitch (0.01), roll (0.01), surge velocity (3.0) |
Measurements: | magsaszenirM1.a1:
magsaszefilterbandsM1.a1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
03/15/2016 | 1051 | 03/29/2016 | 1509 | Missing |
Subject: | ENA/RAIN/C1 - Missing Data |
DataStreams: | enarainwbC1.b1, enarainwbC1.00, enarainwbC1.a1 |
Description: | Instrument was down for troubleshooting |
Measurements: | enarainwbC1.a1:
enarainwbC1.b1:
enarainwbC1.00:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
02/09/2014 | 0000 | 08/04/2015 | 1410 | Suspect |
Subject: | MAO/ACSM/S1 - Noise in data |
DataStreams: | maoaosacsmS1.b1 |
Description: | There continue to be issues with noise in the ACSM in the MAOS A container located at the site near Manacapuru in Amazonas, Brazil. The noise is intermittent, ongoing, and persistent. |
Measurements: | maoaosacsmS1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
07/10/2012 | 0000 | 10/02/2013 | 2359 | Does not affect quality |
Subject: | MAG/AOS/M1 - Reprocess: reprocessing from raw data in preparation for not-yet-released b1 |
DataStreams: | magaosimpactorM1.00 |
Description: | End to end reprocessing to generate new a1 datastreams is needed so that when the harmonization software is released to production, we will be ready with the a1 datastreams that are input to the subsequent processing software. |
Measurements: | magaosimpactorM1.00:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
03/29/2016 | 1510 | 04/05/2016 | 0755 | Incorrect |
01/26/2015 | 0000 | 03/15/2016 | 1050 | Incorrect |
Subject: | ENA/RAIN/C1 - Noisy Data |
DataStreams: | enarainwbC1.b1, enarainwbC1.00, enarainwbC1.a1 |
Description: | The instrument has noise and produces very large false positives. |
Measurements: | enarainwbC1.a1:
enarainwbC1.b1:
enarainwbC1.00:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
10/04/2015 | 2159 | 10/13/2015 | 2002 | Incorrect |
Subject: | MAO/ACSM/S1 - critical orifice clog and resulting noise issues |
DataStreams: | maoaosacsmS1.b1 |
Description: | The critical orifice clogged at the beginning of the specified period and there was a substantial drop in the inlet pressure. the orifice was cleaned and reinstalled, but there was significant instrument noise. A second cleaning and reinstallation solved the problem. |
Measurements: | maoaosacsmS1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
12/26/2015 | 1921 | 12/28/2015 | 1023 | Missing |
12/29/2015 | 1719 | 12/31/2015 | 1130 | Missing |
Subject: | ENA/RL/C1 - Missing Data |
DataStreams: | enarllogC1.a0 |
Description: | Data are missing during this period due to technical issues with the lidar. |
Measurements: | enarllogC1.a0:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
02/11/2016 | 0055 | 02/12/2016 | 1334 | Incorrect |
02/12/2016 | 2125 | 02/19/2016 | 1651 | Incorrect |
01/14/2016 | 2044 | 02/07/2016 | 1125 | Incorrect |
Subject: | ENA/MFRSR/C1 - Heater not working - connector issue |
DataStreams: | enamfrsrlangleyC1.c1, enamfrsrlangplotC1.c1 |
Description: | There are three periods when the heater is not working due to a poor connection. Instrument is designed to operate at ~40 degC. Avoid data covered by this DQR. |
Measurements: | enamfrsrlangplotC1.c1:
enamfrsrlangleyC1.c1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
02/05/2016 | 1631 | 02/24/2016 | 1631 | Missing |
Subject: | ENA/MWR3C/C1 - Missing data |
DataStreams: | enamwr3ctipC1.a1 |
Description: | Data are missing because of a software problem |
Measurements: | enamwr3ctipC1.a1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
10/21/2014 | 0000 | 05/19/2016 | 2200 | Does not affect quality |
Subject: | ENA/DL/DLPROF/C1 - Reprocess: Incorrect serial number |
DataStreams: | enadlrhiC1.b1, enadlprofwstats4newsC1.c1 |
Description: | The instrument serial number that appears in the netcdf files global attributes is incorrect. The correct serial number is 0514-84. |
Measurements: | enadlrhiC1.b1:
enadlprofwstats4newsC1.c1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
05/29/2016 | 2130 | 06/12/2016 | 2359 | Missing |
Subject: | GEC/OMI/X1 - Missing data |
DataStreams: | gecomireflX1.00, gecomiozoneX1.00, gecomiaerosolindexX1.00 |
Description: | Starting around 21:30 on 05/29, OMI operations have temporarily stopped. |
Measurements: | gecomiaerosolindexX1.00:
gecomiozoneX1.00:
gecomireflX1.00:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
04/23/2016 | 1355 | 04/23/2016 | 1922 | Incorrect |
04/25/2016 | 1355 | 04/25/2016 | 1922 | Incorrect |
04/20/2016 | 1355 | 04/20/2016 | 1922 | Incorrect |
04/26/2016 | 1355 | 04/26/2016 | 1922 | Incorrect |
04/19/2016 | 1355 | 04/19/2016 | 1922 | Incorrect |
05/01/2016 | 1355 | 05/01/2016 | 1922 | Incorrect |
04/22/2016 | 1355 | 04/22/2016 | 1922 | Incorrect |
04/18/2016 | 1355 | 04/18/2016 | 1922 | Incorrect |
04/29/2016 | 1355 | 04/29/2016 | 1922 | Incorrect |
04/30/2016 | 1355 | 04/30/2016 | 1922 | Incorrect |
04/28/2016 | 1355 | 04/28/2016 | 1922 | Incorrect |
04/24/2016 | 1355 | 04/24/2016 | 1922 | Incorrect |
05/04/2016 | 1355 | 05/04/2016 | 1922 | Incorrect |
04/27/2016 | 1355 | 04/27/2016 | 1922 | Incorrect |
05/05/2016 | 1355 | 05/05/2016 | 1922 | Incorrect |
04/21/2016 | 1355 | 04/21/2016 | 1922 | Incorrect |
04/17/2016 | 1355 | 04/17/2016 | 1922 | Incorrect |
05/03/2016 | 1355 | 05/03/2016 | 1922 | Incorrect |
05/02/2016 | 1355 | 05/02/2016 | 1922 | Incorrect |
04/15/2016 | 1355 | 04/15/2016 | 1922 | Incorrect |
04/16/2016 | 1355 | 04/16/2016 | 1922 | Incorrect |
Subject: | ENA/MFRSR/C1 - Shading Problem |
DataStreams: | enamfrsrlangleyC1.c1, enamfrsrlangplotC1.c1 |
Description: | A shading problem is first evident on 20160415 and grows progressively worse through 20160505. Maintenance resolved the issue. Do not use data covered by this DQR. |
Measurements: | enamfrsrlangplotC1.c1:
enamfrsrlangleyC1.c1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
08/09/2016 | 0626 | 08/09/2016 | 0630 | Incorrect |
08/29/2016 | 2359 | 08/30/2016 | 0002 | Incorrect |
08/09/2016 | 1430 | 08/09/2016 | 1509 | Incorrect |
08/11/2016 | 1645 | 08/12/2016 | 1026 | Incorrect |
08/10/2016 | 1024 | 08/10/2016 | 1145 | Incorrect |
08/10/2016 | 1737 | 08/10/2016 | 1814 | Incorrect |
08/11/2016 | 0617 | 08/11/2016 | 0650 | Incorrect |
08/09/2016 | 0154 | 08/09/2016 | 0204 | Incorrect |
08/10/2016 | 0335 | 08/10/2016 | 0345 | Incorrect |
08/30/2016 | 0304 | 08/31/2016 | 1211 | Incorrect |
Subject: | ENA/MFRSR/C1 - Heater Problem, connector issue |
DataStreams: | enamfrsrlangleyC1.c1, enamfrsrlangplotC1.c1 |
Description: | It seems like there may be a problem with the signal connector. We've had a few instances of the head temp failing, but replacing the heater board did not resolve the problem. For the most recent "fix" the system was powered down and the signal cable reseated. |
Measurements: | enamfrsrlangplotC1.c1:
enamfrsrlangleyC1.c1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
08/22/2016 | 0900 | 08/23/2016 | 1831 | Missing |
Subject: | ENA/MWR3C/C1 - Data system upgrade |
DataStreams: | enamwr3ctipC1.a1 |
Description: | Data lost during the site data system upgrade. |
Measurements: | enamwr3ctipC1.a1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
07/23/2016 | 1000 | 08/08/2016 | 1441 | Missing |
Subject: | ENA/MFRSR/C1 - Missing data |
DataStreams: | enamfrsrlangleyC1.c1, enamfrsrlangplotC1.c1 |
Description: | The logger was replaced as part of troubleshooting a suspected issue. This caused a cascade of issues, but did ultimately result in a problem with the wiring harness at the data logger to be located. The end result though is there are no data during this period. |
Measurements: | enamfrsrlangplotC1.c1:
enamfrsrlangleyC1.c1:
|