DQR ID | Subject | Data Streams Affected | Data Quality Metric |
---|---|---|---|
D151019.1 | ENA/MWR3C/C1 - Incorrect surface relative humidity | enamwr3cC1.b1 | Incorrect |
D160208.1 | ENA/MET/C1 - Reprocessed and Corrected: Wind direction off by 180 degrees | enametC1.b1 | Does not affect quality |
D160208.4 | ENA/SONDE/C1 - Reprocessed and Corrected: Surface wind direction from MET incorrect by 180 deg | enasondewnpnC1.b1 | Does not affect quality |
D160226.2 | ENA/MWR3C/C1 - Missing data | enamwr3cC1.b1 | Missing |
D160427.7 | ENA/C1 - Reprocess: Slightly incorrect location fields | enasondewnpnC1.b1, enaceilC1.b1, enamwr3cC1.b1, enametC1.b1 | Suspect |
D160520.10 | ENA/DL/DLPROF/C1 - Reprocess: Incorrect serial number | enadlfptC1.b1 | Does not affect quality |
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
09/13/2015 | 1100 | 02/05/2016 | 1215 | Incorrect |
Subject: | ENA/MWR3C/C1 - Incorrect surface relative humidity |
DataStreams: | enamwr3cC1.b1 |
Description: | The surface relative humidity readings are incorrect and should be disregarded |
Measurements: | enamwr3cC1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
02/05/2016 | 1749 | 02/07/2016 | 1137 | Does not affect quality |
Subject: | ENA/MET/C1 - Reprocessed and Corrected: Wind direction off by 180 degrees |
DataStreams: | enametC1.b1 |
Description: | DATA REPROCESSED and CORRECTED: The wind sensor was not aligned correctly. Wind directions during this time are off by 180 degrees. The raw data were modified and the data were run through the ingest to address the issue. The data were Archived in July 2016. Please retrieve the reprocessed data for use in your analysis. You may find these data using the ARM Discovery tool at the following link: http://www.archive.arm.gov/discovery/#v/results/s/finst::met/fsite::ena/ffac::ena.C1 ORIGINAL DQR CATEGORY: Red( Incorrect) REPROCESSED and CORRECTED DATA ARCHIVED:2016-07 REPROCESS IDENTIFICATION NUMBER: RID 1424 --------------------------------------------------- --- ORIGINAL DQR DESCRIPTION --- --------------------------------------------------- The wind sensor was not aligned correctly. Wind directions during this time are off by 180 degrees. |
Measurements: | enametC1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
02/05/2016 | 2300 | 02/07/2016 | 0106 | Does not affect quality |
Subject: | ENA/SONDE/C1 - Reprocessed and Corrected: Surface wind direction from MET incorrect by 180 |
DataStreams: | enasondewnpnC1.b1 |
Description: | DATA REPROCESSED and CORRECTED: The surface wind direction was incorrect by 180 degrees for three sonde launches during this time period when the MET instrument had been moved. Raw data for these launches have been corrected. ORIGINAL DQR CATEGORY: Red( Incorrect) REPROCESSED and CORRECTED DATA ARCHIVED:2016-03-31 REPROCESS IDENTIFICATION NUMBER: RID 1433 --------------------------------------------------- --- ORIGINAL DQR DESCRIPTION --- --------------------------------------------------- Surface values for sonde are taken from colocated MET. Wind direction was incorrect by 180 deg after the wind bird was moved so that the MAWS ultrasonic could be installed. Three sonde launches took place with incorrect wind direction before error was corrected by adjusting MET wind bird to correct direction. |
Measurements: | enasondewnpnC1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
02/05/2016 | 1631 | 02/24/2016 | 1631 | Missing |
Subject: | ENA/MWR3C/C1 - Missing data |
DataStreams: | enamwr3cC1.b1 |
Description: | Data are missing because of a software problem |
Measurements: | enamwr3cC1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
09/29/2013 | 0941 | 04/30/2016 | 2359 | Suspect |
Subject: | ENA/C1 - Reprocess: Slightly incorrect location fields |
DataStreams: | enasondewnpnC1.b1, enaceilC1.b1, enamwr3cC1.b1, enametC1.b1 |
Description: | Some of the instruments are being processed with the previous "GRW-Azores" lat/lon/alt instead of the new "ENA-Azores" lat/lon/alt. The differences are minor, but will be corrected. The respective GRW and ENA lat, lon, and alt values are as follows: GRW lat = 39.0911 ; ENA lat = 39.0916 ; GRW lon = -28.0297 ; ENA lon = -28.0257 ; GRW alt = 26 ; ENA alt = 30.48 ; |
Measurements: | enamwr3cC1.b1:
enaceilC1.b1:
enametC1.b1:
enasondewnpnC1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
10/21/2014 | 0000 | 05/19/2016 | 2200 | Does not affect quality |
Subject: | ENA/DL/DLPROF/C1 - Reprocess: Incorrect serial number |
DataStreams: | enadlfptC1.b1 |
Description: | The instrument serial number that appears in the netcdf files global attributes is incorrect. The correct serial number is 0514-84. |
Measurements: | enadlfptC1.b1:
|