DQR ID | Subject | Data Streams Affected | Data Quality Metric |
---|---|---|---|
D140103.1 | MAO/SKYRAD/M1 - Reprocessed: IRT configuration error | maoskyrad60sM1.b1 | Does not affect quality |
D141111.2 | MAO/SKYRAD/M1 - Too great of a difference between hemisp1 and hemisp2 | maoskyrad60sM1.b1 | Suspect |
D150818.1 | MAO/SKYRAD/M1 - Reprocess: Incorrect calibration coefficients | maoskyrad60sM1.b1 | Incorrect |
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
12/27/2013 | 1648 | 01/02/2014 | 1923 | Does not affect quality |
Subject: | MAO/SKYRAD/M1 - Reprocessed: IRT configuration error |
DataStreams: | maoskyrad60sM1.b1 |
Description: | SKYRAD IRT sky temperature measurements were ~40K too low. The analog output configuration of the IRT was automatically set to incorrect values by the serial collection script. An error in the name of the startup file was corrected. The data were reprocessed to correct the configuration/calibration and the reprocessed data were archived in February, 2014. |
Measurements: | maoskyrad60sM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
10/30/2014 | 0800 | 11/01/2014 | 1133 | Suspect |
Subject: | MAO/SKYRAD/M1 - Too great of a difference between hemisp1 and hemisp2 |
DataStreams: | maoskyrad60sM1.b1 |
Description: | down_long_hemisp difference between hemisp1 and hemisp2 indicates a possible problem with one or both of the instruments. |
Measurements: | maoskyrad60sM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
02/05/2015 | 1730 | 08/13/2015 | 1900 | Incorrect |
Subject: | MAO/SKYRAD/M1 - Reprocess: Incorrect calibration coefficients |
DataStreams: | maoskyrad60sM1.b1 |
Description: | During the DQR time period, the CR3000 program had correct serial numbers and calibration coefficients for the PIR1-DIR and PIR2-DIR datalogger channels: PIR1 SN34303, calibration coefficient K1= 0.247520; PIR2 SN34306, calibration coefficient K1=0.230410. PIR SN34306 (on sun tracker) was used with K1= 0.247520 on the PIR1-DIR datalogger channel; K1=0.230410 should be used for reprocessing to provide correct data for PIR1-DIR parameters. PIR SN34303 (on sun tracker) was used with K1= 0.230410 on the PIR2-DIR datalogger channel; K1=0.247520 should be used for reprocessing to provide correct data for PIR2-DIR parameters. |
Measurements: | maoskyrad60sM1.b1:
|