DQR ID | Subject | Data Streams Affected | Data Quality Metric |
---|---|---|---|
D050321.6 | PYE/TSI/M1 - Misalignment | pyetsiskyimageM1.a1, pyetsiskycoverM1.b1 | Suspect |
D050503.2 | PYE/TSI/M1 - water in lens | pyetsiskyimageM1.a1, pyetsiskycoverM1.b1 | Incorrect |
D111216.1 | GAN/TSI/M1 - Missing data | gantsiskycoverM1.b1 | Missing |
D121217.11 | GAN/TSI/M1 - Water on lens | gantsiskycoverM1.b1 | Suspect |
D130703.3 | PYE/TSI/M1 - Data processing problem | pyetsiskycoverM1.b1 | Does not affect quality |
D130718.12 | GAN/TSI/M1 - Data processing problem | gantsiskycoverM1.b1 | Does not affect quality |
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
02/01/2005 | 1525 | 04/07/2005 | 1715 | Suspect |
Subject: | PYE/TSI/M1 - Misalignment |
DataStreams: | pyetsiskyimageM1.a1, pyetsiskycoverM1.b1 |
Description: | The TSI was not aligned with true north. |
Measurements: | pyetsiskycoverM1.b1:
pyetsiskyimageM1.a1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
04/23/2005 | 0032 | 05/07/2005 | 1822 | Incorrect |
Subject: | PYE/TSI/M1 - water in lens |
DataStreams: | pyetsiskyimageM1.a1, pyetsiskycoverM1.b1 |
Description: | The lower half of the TSI images were blurry due to water in the camera lens and/or filter. The problem was corrected when both were cleaned. |
Measurements: | pyetsiskycoverM1.b1:
pyetsiskyimageM1.a1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
11/12/2011 | 0412 | 11/22/2011 | 0052 | Missing |
Subject: | GAN/TSI/M1 - Missing data |
DataStreams: | gantsiskycoverM1.b1 |
Description: | Data are missing and unrecoverable. |
Measurements: | gantsiskycoverM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
09/25/2011 | 0000 | 02/09/2012 | 2359 | Suspect |
Subject: | GAN/TSI/M1 - Water on lens |
DataStreams: | gantsiskycoverM1.b1 |
Description: | After a rain episode, drops of water collected on the lens window causing the cloud fraction values to be suspect. To prevent this, a drip edge was formed around the bottom of the enclosure with thick electrical or splicing tape. |
Measurements: | gantsiskycoverM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
02/01/2005 | 0000 | 09/15/2005 | 2359 | Does not affect quality |
Subject: | PYE/TSI/M1 - Data processing problem |
DataStreams: | pyetsiskycoverM1.b1 |
Description: | Values of count_opaque and count_thin are reals but should be integers (units = pixels). |
Measurements: | pyetsiskycoverM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
09/25/2011 | 0000 | 02/09/2012 | 2359 | Does not affect quality |
Subject: | GAN/TSI/M1 - Data processing problem |
DataStreams: | gantsiskycoverM1.b1 |
Description: | Values of count_opaque and count_thin are reals but should be integers (units = pixels). |
Measurements: | gantsiskycoverM1.b1:
|