Data Quality Reports for Session: 183969 User: kwintenv1 Completed: 03/02/2017


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected Data Quality Metric
D160308.1SGP/ARMBE2DGRID/X1 - Reprocessed and Corrected:Will change ECOR input to QCECORsgparmbe2dgridX1.c1Does not affect quality
D160629.5SGP/ARMBE2DGRID/X1 - Reprocess: OKM and KSU Mesonet Data Errorsgparmbe2dgridX1.c1Suspect


DQRID : D160308.1
Start DateStart TimeEnd DateEnd Time Data Quality Metric
01/01/2011000012/31/20112300Does not affect quality
Subject:
SGP/ARMBE2DGRID/X1 -  Reprocessed and Corrected:Will change ECOR input to QCECOR
DataStreams:sgparmbe2dgridX1.c1
Description:
DATA REPROCESSED and CORRECTED: 

The ARMBE2DGRID data was reprocessed with improved sensible and latent heat flux values. 
Input data from the ECOR instrument was replaced by the QCECOR Value-added product which 
applies more stringent automated quality checks on the eddy correlation data. 

ORIGINAL DQR CATEGORY: Transparent (Does not affect quality)

REPROCESSED and CORRECTED DATA ARCHIVED:2016-07

REPROCESS IDENTIFICATION NUMBER: RID 1441

---------------------------------------------------
--- ORIGINAL DQR DESCRIPTION ---
---------------------------------------------------

Data quality may be improved slightly after reprocessing for some sensible and latent heat 
flux values as input data from the ECOR instrument will be replaced with data from from 
the QCECOR Value-added product. The QCECOR VAP applies more stringent automated quality 
checks on the eddy correlation data.
Measurements:sgparmbe2dgridX1.c1:
  • Sensible heat flux(sensible_heat_flux)
  • Latent heat flux(latent_heat_flux)
  • Surface sensible heat flux, domain mean(sensible_heat_flux_mean)
  • Surface latent heat flux, domain mean(latent_heat_flux_mean)


Back To Table of Contents

DQRID : D160629.5
Start DateStart TimeEnd DateEnd Time Data Quality Metric
01/01/2011000012/31/20122300Suspect
Subject:
SGP/ARMBE2DGRID/X1 - Reprocess: OKM and KSU Mesonet Data Error
DataStreams:sgparmbe2dgridX1.c1
Description:
The VAP code is not correctly handling the situation when the number of sites changes 
within a month for the OKM and KAM data. This is impacting some of the fields in the 
ARMBE2DGRID data.
Measurements:sgparmbe2dgridX1.c1:
  • Temperature mean(temp_mean)
  • Rain, surface, 1-min avg(precip_rate_mean)
  • Wind speed, S-to-N component, at altitude, derived from ETA model(v_wind)
  • Humidity, relative, at 2-m height, 1-min avg(rh_mean)
  • Precipitation intensity(precip_rate)
  • V wind component, domain mean(v_wind_mean)
  • Wind speed, W-to-E component, at altitude(u_wind)
  • Humidity, relative, on hybrid-b grid, derived from RUC model(rh)
  • Temperature, air, 60-m height, 30-min intervals(temp)
  • Surface pressure, domain mean(pressure_mean)
  • U wind component, domain mean(u_wind_mean)
  • surface pressure(pressure)


Back To Table of Contents



END OF DATA