Data Quality Reports for Session: 184713 User: akinolao1 Completed: 03/29/2017


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected Data Quality Metric
D060523.2NIM/WACR/M1 - No crosspolarization datanimwacrM1.b1Missing
D100729.2NIM/WACR/M1 - Reprocessed: Reflectivity and Height OffsetsnimwacrM1.b1Does not affect quality


DQRID : D060523.2
Start DateStart TimeEnd DateEnd Time Data Quality Metric
04/18/2006080004/20/20061130Missing
Subject:
NIM/WACR/M1 - No crosspolarization data
DataStreams:nimwacrM1.b1
Description:
When the spectra disk was swapped, an erroneous configuration file was generated that 
resulted in only copol measurements.  The averaging was also 1/2 of its normal value 
resulting in data files two times their normal size.
Measurements:nimwacrM1.b1:
  • Polarization
  • Reflectivity(Reflectivity)
  • MMCR Mean Doppler Velocity(MeanDopplerVelocity)
  • MMCR Spectral Width(SpectralWidth)


Back To Table of Contents

DQRID : D100729.2
Start DateStart TimeEnd DateEnd Time Data Quality Metric
05/05/2006000012/29/20062359Does not affect quality
Subject:
NIM/WACR/M1 - Reprocessed: Reflectivity and Height Offsets
DataStreams:nimwacrM1.b1
Description:
The instrument vendor informed us of a range (height) offset of 13 m and provided updated 
reflectivity calibration.  All values reported for 'Reflectivity' were approximately 1.5 
dB too low. In addition, the Reflectivity in the first and fourth range gates (starting 
from the surface) needed to be further corrected by an additional 2.7 and -0.9 dB, 
respectively. The 'height' field values were 13.33 m too low.  The data were reprocessed to 
correct these problems.

The nimwacrM1.b1 data were reprocessed and archived in October 2010.  The 
nimwacrspeccmaskcopolM1.a0 and nimwacrspeccmaskxpolM1.a0 data were reprocessed and archived in May 2012.
Measurements:nimwacrM1.b1:
  • heights
  • Reflectivity(Reflectivity)


Back To Table of Contents



END OF DATA