Subject: | SGP/QCRAD/E12 - Reprocess: reprocess with interpolated ebbr data |
DataStreams: | sgpqcrad1longE12.c2, sgpqcrad1longE12.s2
|
Description: | Met data from 5ebrr.b1 data is used at this site. The data in the ebbr data stream is
5-minute average resolution while QCRad output has a 1-minute time interval. Currently the
ebbr data is stored in the QCRad output only once every 5 minutes, rather than
interpolating to each minute. i.e.it stores the data every 5 minutes and the rest of the time is
filled with values of -9999. The reprocessed data will interpolate the ebbr data to 1-minute
intervals.
This means that QC checks requiring Temperature data (impacting primarily the LW
measurements) are only able to be done once every 5 minutes. |
Measurements: | sgpqcrad1longE12.c2: - Temp_Air
- Horizontal wind speed(wind_speed)
- Humidity, relative, at 21-m height, 30-min avg(rh)
- Horizontal wind direction(wind_direction)
- Pressure reduced to mean sea level(press)
- Precipitation(precip)
sgpqcrad1longE12.s2: - Humidity, relative, at 21-m height, 30-min avg(rh)
- Horizontal wind speed(wind_speed)
- Temp_Air
- Horizontal wind direction(wind_direction)
- Pressure reduced to mean sea level(press)
- Precipitation(precip)
|