Data Quality Reports for Session: 185534 User: masons1 Completed: 05/11/2017

TABLE OF CONTENTS

DQR IDSubjectData Streams Affected Data Quality Metric
D140326.5TMP/MET/M1 - Wind sensor siting not idealtmpmetM1.b1Does not affect quality
D140728.2TMP/MET/M1 - Barometer inlet blockedtmpmetM1.b1Suspect


DQRID : D140326.5
Start DateStart TimeEnd DateEnd Time Data Quality Metric
01/23/2014000009/13/20142359Does not affect quality
Subject:
TMP/MET/M1 - Wind sensor siting not ideal
DataStreams:tmpmetM1.b1
Description:
According to the manual, the wind sensor should ideally be mounted higher than any object 
within a 300 meter radius. This particular site is bordered by approximately 20 meter 
tall trees (the wind sensor is mounted at 10 meters) from about due west to south/southeast, 
at a distance approximately 60 meters or less. Please reference the instrument handbook 
or contact the mentor for more information.
Measurements:tmpmetM1.b1:
  • Wind direction vector mean(wdir_vec_mean)
  • Wind speed vector mean(wspd_vec_mean)
  • Wind speed, lower, 1-min avg(wspd_arith_mean)
  • wdir_vec_std

Back To Table of Contents

DQRID : D140728.2
Start DateStart TimeEnd DateEnd Time Data Quality Metric
07/09/2014120007/27/20140633Suspect
Subject:
TMP/MET/M1 - Barometer inlet blocked
DataStreams:tmpmetM1.b1
Description:
A blockage occurred in the barometer inlet tubing, causing data to cycle up to .5 kPa from 
minute-to-minute.
Measurements:tmpmetM1.b1:
  • Atmospheric pressure(atmos_pressure)

Back To Table of Contents


END OF DATA