Description: | Met data from 5ebrr.b1 data is used at this site. The data in the ebbr data stream is
5-minute average resolution while QCRad output has a 1-minute time interval. Currently the
ebbr data is stored in the QCRad output only once every 5 minutes, rather than
interpolating to each minute. i.e.it stores the data every 5 minutes and the rest of the time is
filled with values of -9999. The reprocessed data will interpolate the ebbr data to 1-minute
intervals.
This means that QC checks requiring Temperature data (impacting primarily the LW
measurements) are only able to be done once every 5 minutes. |