Measurements |
- nrcns4 (Number of values required for consensus, beam 4)
- elevation4 (Elevation angle of beam 4)
- oband (Oblique FFT bandwidth)
- azimuth1 (Azimuth of beam 1)
- mdf (Mean radial beam velocity)
- nrec4 (Number of spectra per averaging interval, beam 4)
- prf (Pulse repetition frequency)
- ncns1 (Number of values that passed consensus, beam 1)
- nrcns (Number of values required for consensus)
- nheight (Number of valid heights for each power)
- nrec1 (Number of spectra per averaging interval, beam 1)
- lon (East longitude)
- power (Power offset)
- beam_elevation (Beam elevation angle)
- spc_amp (Spectral data)
- nrec3 (Number of spectra per averaging interval, beam 3)
- rgf (Height of center of first range gate)
- sampr (Sampling rate)
- rgs (Range gate spacing)
- time_offset (Time offset from base_time)
- azimuth0 (Azimuth of beam 0)
- ncoh (Number of coherent samples per spectral point)
- snr (Signal to noise ratio)
- nrcns1 (Number of values required for consensus, beam 1)
- snr3 (Signal to noise ratio, beam 3)
- elevation3 (Elevation angle of beam 3)
- spcavetime (Average time per average spectra. Also know as dwell.)
- rgl (Height of center of last range gate)
- nspc (Number of individual spectra per average spectrum)
- vsr (Radial velocity spectral resolution)
- noise (1000*log(base10) of noise signal level)
- vel0 (Beam 0 radial wind speed)
- nrcns0 (Number of values required for consensus, beam 0)
- elevation1 (Elevation angle of beam 1)
- bswitch (Rx bandwidth switch code)
- vel3 (Beam 3 radial wind speed)
- snr1 (Signal to noise ratio, beam 1)
- range_gate (Height index)
- snr0 (Signal to noise ratio, beam 0)
- specw (Spectral width)
- lat (North latitude)
- vel2 (Beam 2 radial wind speed)
- sitime (Individual spectrum integration time)
- u_wind (Easterly wind component)
- azimuth3 (Azimuth of beam 3)
- snr2 (Signal to noise ratio, beam 2)
- spcavetime (Average time per average spectra. Also known as dwell.)
- azimuth4 (Azimuth of beam 4)
- dir (Horizontal wind direction)
- vel4 (Beam 4 radial wind speed)
- nrec2 (Number of spectra per averaging interval, beam 2)
- beam_azimuth (Beam azimuth angle)
- base_time (Base time in Epoch)
- tditime (Time domain integration time)
- ncns0 (Number of values that passed consensus, beam 0)
- spd (Horizontal wind speed)
- dly (Delay time to first gate)
- height_t (Array of heights for each sample time)
- ncns (Number of values that passed consensus)
- avgint (Averaging interval)
- ipp (Interpulse period)
- elevation2 (Elevation angle of beam 2)
- ncns3 (Number of values that passed consensus, beam 3)
- nrcns3 (Number of values required for consensus, beam 3)
- nheight (Number of valid heights)
- vband (Vertical FFT bandwidth)
- pcbits (Number of pulse code bits)
- plen (Pulse length)
- height_p (Array of heights for each power)
- nrec0 (Number of spectra per averaging interval, beam 0)
- vel1 (Beam 1 radial wind speed)
- snr4 (Signal to noise ratio, beam 4)
- elevation0 (Elevation angle of beam 0)
- v_wind (Northerly wind component)
- nrec (Number of spectra per averaging interval)
- alt (Altitude above mean sea level)
- ncns2 (Number of values that passed consensus, beam 2)
- ncns4 (Number of values that passed consensus, beam 4)
- nrcns2 (Number of values required for consensus, beam 2)
- azimuth2 (Azimuth of beam 2)
- bins (Spectral bin number)
- time (Time offset from midnight)
- vel (Radial wind speed)
|