Data Quality Report for Order ID: 187378
User ID: yann1blanc    Date completed: 2017-08-21
All DQRs
DQR ID Subject Affected Data Streams Data Quality Metric
D170105.7 ASI/WSACR/M1 - Failure of the UPS asiwsacrcrrhiM1.a1 Missing
D161031.14 ASI/WSACR/M1 - Incorrect velocity sign asiwsacrppiM1.a1 Incorrect
D170105.12 ASI/KASACR/M1 - Maintenance Mode asikasacrrhiM1.a1 Missing
D161202.5 ASI/WSACR/M1 - Intermittent periods of missing data asiwsacrblrhiM1.a1 Note
D170106.1 ASI/WSACR/M1 - Missing Returns asiwsacrawrhiM1.a1 Incorrect
D161031.13 ASI/KASACR/M1 - Incorrect velocity sign asikasacrcrrhiM1.a1 Incorrect
D170621.3 ASI/WSACR/M1 - Instrument Down asiwsacrblrhiM1.a1 Missing
D170105.6 ASI/KASACR/M1 - Failure of the UPS asikasacrzppiM1.a1 Missing
 
DQR ID: D170105.7    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2016-09-12 15:30:00 2016-10-27 12:35:00 Missing
Subject: ASI/WSACR/M1 - Failure of the UPS
Affected Datastreams: asiwsacrcrrhiM1.a1
Description Radar was down due to a failure of the UPS. Data are missing.
Measurements
  • follow_mode (Follow mode)
  • azimuth (Azimuth angle from true north)
  • reflectivity (Equivalent reflectivity factor)
  • radar_antenna_gain_h (Nominal radar antenna gain, h channel)
  • r_calib_noise_vx (Noise floor for vertical cross-polar channel 2)
  • sky_noise_copol (Sky noise, copolar)
  • r_calib_pulse_width (Pulse width for this calibration)
  • sky_power_copol (Sky power, copolar)
  • volume_number (Volume number)
  • snr (Signal-to-noise-ratio)
  • mean_doppler_velocity (Mean Doppler velocity)
  • sweep_start_ray_index (Index of first ray in sweep, 0-based)
  • fixed_angle (Target angle for sweep)
  • r_calib_receiver_gain_hc (Receiver gain for horizontal copolar channel 1)
  • prt_mode (PRT mode)
  • r_calib_xmit_power_h (Transmit power)
  • sky_power_xpol (Sky power, cross-polar)
  • linear_depolarization_ratio (Linear depolarization ratio H)
  • nyquist_velocity (Unambiguous Doppler velocity)
  • r_calib_two_way_radome_loss_h (Two-way radome loss)
  • time_offset (Time offset from base_time)
  • scan_rate (Scan rate, positive for clockwise or increasing elevation)
  • co_to_crosspol_correlation_coeff (Copol to cross-polar correlation coefficient (also known as rhocx))
  • lon (East longitude)
  • instrument_type (Instrument type)
  • sweep_mode (Sweep mode)
  • r_calib_noise_hc (Noise floor power for horizontal copolar channel1)
  • frequency (Operating frequency)
  • r_calib_radar_constant_v (Radar constant, vertical cross-polar channel 2)
  • pulse_width (Pulse width)
  • unambiguous_range (Unambiguous range)
  • n_samples (Number of samples used to compute moments)
  • primary_axis (Primary axis of rotation)
  • prt (Pulse repetition time)
  • r_calib_index (Index for the calibration that applies to each ray)
  • r_calib_noise_source_power_h (Noise power in noise source region for horizontal copolar channel 1)
  • time (Time in seconds since volume start)
  • altitude (Altitude)
  • range (Range to measurement volume)
  • lat (North latitude)
  • polarization_mode (Polarization mode)
  • alt (Altitude above mean sea level)
  • altitude_agl (Altitude above ground level)
  • radar_beam_width_h (Radar beam width, horizontal channel)
  • time_coverage_end (Time corresponding to last radial in file)
  • antenna_transition (Antenna transition indicator, 1 if between sweeps, otherwise 0)
  • elevation (Elevation angle from horizontal)
  • radar_antenna_gain_v (Nominal radar antenna gain, v channel)
  • base_time (Base time in Epoch)
  • cross_polar_differential_phase (Cross-polar propagation phase shift)
  • longitude (Longitude)
  • sweep_number (Sweep number)
  • latitude (Latitude)
  • r_calib_time (Time of the calibration that applies to each ray)
  • platform_type (Platform type)
  • time_coverage_start (Time corresponding to first radial in file)
  • r_calib_radar_constant_h (Radar constant, horizontal copolar channel 1)
  • sweep_end_ray_index (Index of last ray in sweep, 0-based)
  • r_calib_receiver_gain_vx (Receiver gain for vertical cross-polar channel 2)
  • radar_measured_transmit_power_h (Radar measured transmit power, h channel)
  • radar_beam_width_v (Radar beam width, vertical channel)
  • sky_noise_xpol (Sky noise, cross-polar)
  • r_calib_noise_source_power_v (Noise power in noise source region for vertical cross-polar channel)
  • spectral_width (Spectrum width)
 
DQR ID: D161031.14    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2016-07-20 22:59:00 2016-10-31 00:00:00 Incorrect
Subject: ASI/WSACR/M1 - Incorrect velocity sign
Affected Datastreams: asiwsacrppiM1.a1
Description The mean Doppler velocity has the incorrect sign.
Measurements
  • mean_doppler_velocity (Mean Doppler velocity)
 
DQR ID: D170105.12    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2016-10-27 21:05:01 2016-11-21 17:17:11 Missing
Subject: ASI/KASACR/M1 - Maintenance Mode
Affected Datastreams: asikasacrrhiM1.a1
Description Data were not processed during this time period because the radar was in maintenance mode.
Measurements
  • reflectivity (Equivalent reflectivity factor)
  • azimuth (Azimuth angle from true north)
  • follow_mode (Follow mode)
  • radar_antenna_gain_h (Nominal radar antenna gain, h channel)
  • r_calib_noise_vx (Noise floor for vertical cross-polar channel 2)
  • sky_noise_copol (Sky noise, copolar)
  • r_calib_pulse_width (Pulse width for this calibration)
  • sky_power_copol (Sky power, copolar)
  • volume_number (Volume number)
  • snr (Signal-to-noise-ratio)
  • mean_doppler_velocity (Mean Doppler velocity)
  • sweep_start_ray_index (Index of first ray in sweep, 0-based)
  • r_calib_xmit_power_h (Transmit power)
  • r_calib_receiver_gain_hc (Receiver gain for horizontal copolar channel 1)
  • fixed_angle (Target angle for sweep)
  • prt_mode (PRT mode)
  • sky_power_xpol (Sky power, cross-polar)
  • nyquist_velocity (Unambiguous Doppler velocity)
  • linear_depolarization_ratio (Linear depolarization ratio H)
  • r_calib_two_way_radome_loss_h (Two-way radome loss)
  • time_offset (Time offset from base_time)
  • scan_rate (Scan rate, positive for clockwise or increasing elevation)
  • co_to_crosspol_correlation_coeff (Copol to cross-polar correlation coefficient (also known as rhocx))
  • lon (East longitude)
  • instrument_type (Instrument type)
  • sweep_mode (Sweep mode)
  • r_calib_noise_hc (Noise floor power for horizontal copolar channel1)
  • frequency (Operating frequency)
  • r_calib_radar_constant_v (Radar constant, vertical cross-polar channel 2)
  • pulse_width (Pulse width)
  • unambiguous_range (Unambiguous range)
  • n_samples (Number of samples used to compute moments)
  • primary_axis (Primary axis of rotation)
  • r_calib_index (Index for the calibration that applies to each ray)
  • prt (Pulse repetition time)
  • r_calib_noise_source_power_h (Noise power in noise source region for horizontal copolar channel 1)
  • time (Time in seconds since volume start)
  • altitude (Altitude)
  • lat (North latitude)
  • range (Range to measurement volume)
  • polarization_mode (Polarization mode)
  • alt (Altitude above mean sea level)
  • altitude_agl (Altitude above ground level)
  • radar_beam_width_h (Radar beam width, horizontal channel)
  • time_coverage_end (Time corresponding to last radial in file)
  • antenna_transition (Antenna transition indicator, 1 if between sweeps, otherwise 0)
  • radar_antenna_gain_v (Nominal radar antenna gain, v channel)
  • elevation (Elevation angle from horizontal)
  • base_time (Base time in Epoch)
  • cross_polar_differential_phase (Cross-polar propagation phase shift)
  • longitude (Longitude)
  • sweep_number (Sweep number)
  • latitude (Latitude)
  • r_calib_time (Time of the calibration that applies to each ray)
  • platform_type (Platform type)
  • time_coverage_start (Time corresponding to first radial in file)
  • r_calib_radar_constant_h (Radar constant, horizontal copolar channel 1)
  • sweep_end_ray_index (Index of last ray in sweep, 0-based)
  • r_calib_receiver_gain_vx (Receiver gain for vertical cross-polar channel 2)
  • radar_measured_transmit_power_h (Radar measured transmit power, h channel)
  • radar_beam_width_v (Radar beam width, vertical channel)
  • sky_noise_xpol (Sky noise, cross-polar)
  • r_calib_noise_source_power_v (Noise power in noise source region for vertical cross-polar channel)
  • spectral_width (Spectrum width)
 
DQR ID: D161202.5    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2016-07-20 23:00:00 2017-10-31 23:59:59 Note
Subject: ASI/WSACR/M1 - Intermittent periods of missing data
Affected Datastreams: asiwsacrblrhiM1.a1
Description WSACR systems goes down for intermittent periods of time throughout the campaign resulting in missing data. Data quality is not affected.
Measurements
  • follow_mode (Follow mode)
  • azimuth (Azimuth angle from true north)
  • reflectivity (Equivalent reflectivity factor)
  • radar_antenna_gain_h (Nominal radar antenna gain, h channel)
  • r_calib_noise_vx (Noise floor for vertical cross-polar channel 2)
  • sky_noise_copol (Sky noise, copolar)
  • r_calib_pulse_width (Pulse width for this calibration)
  • sky_power_copol (Sky power, copolar)
  • volume_number (Volume number)
  • snr (Signal-to-noise-ratio)
  • mean_doppler_velocity (Mean Doppler velocity)
  • sweep_start_ray_index (Index of first ray in sweep, 0-based)
  • fixed_angle (Target angle for sweep)
  • r_calib_receiver_gain_hc (Receiver gain for horizontal copolar channel 1)
  • prt_mode (PRT mode)
  • r_calib_xmit_power_h (Transmit power)
  • sky_power_xpol (Sky power, cross-polar)
  • nyquist_velocity (Unambiguous Doppler velocity)
  • linear_depolarization_ratio (Linear depolarization ratio H)
  • r_calib_two_way_radome_loss_h (Two-way radome loss)
  • time_offset (Time offset from base_time)
  • scan_rate (Scan rate, positive for clockwise or increasing elevation)
  • co_to_crosspol_correlation_coeff (Copol to cross-polar correlation coefficient (also known as rhocx))
  • lon (East longitude)
  • r_calib_noise_source_power_v (Noise power in noise source region for vertical cross-polar channel)
  • instrument_type (Instrument type)
  • sweep_mode (Sweep mode)
  • r_calib_noise_hc (Noise floor power for horizontal copolar channel1)
  • frequency (Operating frequency)
  • pulse_width (Pulse width)
  • r_calib_radar_constant_v (Radar constant, vertical cross-polar channel 2)
  • unambiguous_range (Unambiguous range)
  • n_samples (Number of samples used to compute moments)
  • primary_axis (Primary axis of rotation)
  • r_calib_index (Index for the calibration that applies to each ray)
  • prt (Pulse repetition time)
  • r_calib_noise_source_power_h (Noise power in noise source region for horizontal copolar channel 1)
  • time (Time in seconds since volume start)
  • altitude (Altitude)
  • lat (North latitude)
  • range (Range to measurement volume)
  • polarization_mode (Polarization mode)
  • alt (Altitude above mean sea level)
  • altitude_agl (Altitude above ground level)
  • radar_beam_width_h (Radar beam width, horizontal channel)
  • time_coverage_end (Time corresponding to last radial in file)
  • antenna_transition (Antenna transition indicator, 1 if between sweeps, otherwise 0)
  • elevation (Elevation angle from horizontal)
  • radar_antenna_gain_v (Nominal radar antenna gain, v channel)
  • base_time (Base time in Epoch)
  • cross_polar_differential_phase (Cross-polar propagation phase shift)
  • sweep_number (Sweep number)
  • r_calib_time (Time of the calibration that applies to each ray)
  • latitude (Latitude)
  • platform_type (Platform type)
  • time_coverage_start (Time corresponding to first radial in file)
  • r_calib_radar_constant_h (Radar constant, horizontal copolar channel 1)
  • sweep_end_ray_index (Index of last ray in sweep, 0-based)
  • r_calib_receiver_gain_vx (Receiver gain for vertical cross-polar channel 2)
  • radar_measured_transmit_power_h (Radar measured transmit power, h channel)
  • radar_beam_width_v (Radar beam width, vertical channel)
  • sky_noise_xpol (Sky noise, cross-polar)
  • longitude (Longitude)
  • spectral_width (Spectrum width)
 
DQR ID: D170106.1    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2016-09-11 00:00:00 2016-09-12 12:35:00 Incorrect
Subject: ASI/WSACR/M1 - Missing Returns
Affected Datastreams: asiwsacrawrhiM1.a1
Description The horizontal channel was not receiving valid returns. Co and cross-channel data should not be trusted over this period.
Measurements
  • reflectivity (Equivalent reflectivity factor)
  • azimuth (Azimuth angle from true north)
  • follow_mode (Follow mode)
  • radar_antenna_gain_h (Nominal radar antenna gain, h channel)
  • r_calib_noise_vx (Noise floor for vertical cross-polar channel 2)
  • sky_noise_copol (Sky noise, copolar)
  • r_calib_pulse_width (Pulse width for this calibration)
  • sky_power_copol (Sky power, copolar)
  • volume_number (Volume number)
  • snr (Signal-to-noise-ratio)
  • mean_doppler_velocity (Mean Doppler velocity)
  • sweep_start_ray_index (Index of first ray in sweep, 0-based)
  • fixed_angle (Target angle for sweep)
  • r_calib_xmit_power_h (Transmit power)
  • prt_mode (PRT mode)
  • r_calib_receiver_gain_hc (Receiver gain for horizontal copolar channel 1)
  • sky_power_xpol (Sky power, cross-polar)
  • nyquist_velocity (Unambiguous Doppler velocity)
  • linear_depolarization_ratio (Linear depolarization ratio H)
  • r_calib_two_way_radome_loss_h (Two-way radome loss)
  • time_offset (Time offset from base_time)
  • scan_rate (Scan rate, positive for clockwise or increasing elevation)
  • co_to_crosspol_correlation_coeff (Copol to cross-polar correlation coefficient (also known as rhocx))
  • lon (East longitude)
  • r_calib_noise_source_power_v (Noise power in noise source region for vertical cross-polar channel)
  • instrument_type (Instrument type)
  • sweep_mode (Sweep mode)
  • r_calib_noise_hc (Noise floor power for horizontal copolar channel1)
  • frequency (Operating frequency)
  • r_calib_radar_constant_v (Radar constant, vertical cross-polar channel 2)
  • pulse_width (Pulse width)
  • unambiguous_range (Unambiguous range)
  • n_samples (Number of samples used to compute moments)
  • primary_axis (Primary axis of rotation)
  • r_calib_index (Index for the calibration that applies to each ray)
  • prt (Pulse repetition time)
  • r_calib_noise_source_power_h (Noise power in noise source region for horizontal copolar channel 1)
  • time (Time in seconds since volume start)
  • altitude (Altitude)
  • lat (North latitude)
  • range (Range to measurement volume)
  • alt (Altitude above mean sea level)
  • polarization_mode (Polarization mode)
  • altitude_agl (Altitude above ground level)
  • radar_beam_width_h (Radar beam width, horizontal channel)
  • time_coverage_end (Time corresponding to last radial in file)
  • antenna_transition (Antenna transition indicator, 1 if between sweeps, otherwise 0)
  • elevation (Elevation angle from horizontal)
  • radar_antenna_gain_v (Nominal radar antenna gain, v channel)
  • base_time (Base time in Epoch)
  • cross_polar_differential_phase (Cross-polar propagation phase shift)
  • sweep_number (Sweep number)
  • r_calib_time (Time of the calibration that applies to each ray)
  • latitude (Latitude)
  • platform_type (Platform type)
  • time_coverage_start (Time corresponding to first radial in file)
  • r_calib_radar_constant_h (Radar constant, horizontal copolar channel 1)
  • sweep_end_ray_index (Index of last ray in sweep, 0-based)
  • r_calib_receiver_gain_vx (Receiver gain for vertical cross-polar channel 2)
  • radar_measured_transmit_power_h (Radar measured transmit power, h channel)
  • radar_beam_width_v (Radar beam width, vertical channel)
  • sky_noise_xpol (Sky noise, cross-polar)
  • longitude (Longitude)
  • spectral_width (Spectrum width)
 
DQR ID: D161031.13    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2016-07-20 22:59:00 2016-10-31 00:00:00 Incorrect
Subject: ASI/KASACR/M1 - Incorrect velocity sign
Affected Datastreams: asikasacrcrrhiM1.a1
Description The mean Doppler velocity has the incorrect sign.
Measurements
  • mean_doppler_velocity (Mean Doppler velocity)
 
DQR ID: D170621.3    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2016-09-12 14:26:00 2017-10-31 23:59:59 Missing
Subject: ASI/WSACR/M1 - Instrument Down
Affected Datastreams: asiwsacrblrhiM1.a1
Description Radar went down and due to a number of different factors was not returned to service.
Measurements
  • reflectivity (Equivalent reflectivity factor)
  • azimuth (Azimuth angle from true north)
  • follow_mode (Follow mode)
  • radar_antenna_gain_h (Nominal radar antenna gain, h channel)
  • r_calib_noise_vx (Noise floor for vertical cross-polar channel 2)
  • sky_noise_copol (Sky noise, copolar)
  • r_calib_pulse_width (Pulse width for this calibration)
  • sky_power_copol (Sky power, copolar)
  • volume_number (Volume number)
  • snr (Signal-to-noise-ratio)
  • mean_doppler_velocity (Mean Doppler velocity)
  • sweep_start_ray_index (Index of first ray in sweep, 0-based)
  • r_calib_xmit_power_h (Transmit power)
  • prt_mode (PRT mode)
  • r_calib_receiver_gain_hc (Receiver gain for horizontal copolar channel 1)
  • fixed_angle (Target angle for sweep)
  • sky_power_xpol (Sky power, cross-polar)
  • nyquist_velocity (Unambiguous Doppler velocity)
  • linear_depolarization_ratio (Linear depolarization ratio H)
  • r_calib_two_way_radome_loss_h (Two-way radome loss)
  • time_offset (Time offset from base_time)
  • scan_rate (Scan rate, positive for clockwise or increasing elevation)
  • co_to_crosspol_correlation_coeff (Copol to cross-polar correlation coefficient (also known as rhocx))
  • lon (East longitude)
  • instrument_type (Instrument type)
  • sweep_mode (Sweep mode)
  • r_calib_noise_hc (Noise floor power for horizontal copolar channel1)
  • frequency (Operating frequency)
  • r_calib_radar_constant_v (Radar constant, vertical cross-polar channel 2)
  • pulse_width (Pulse width)
  • unambiguous_range (Unambiguous range)
  • n_samples (Number of samples used to compute moments)
  • primary_axis (Primary axis of rotation)
  • prt (Pulse repetition time)
  • r_calib_index (Index for the calibration that applies to each ray)
  • r_calib_noise_source_power_h (Noise power in noise source region for horizontal copolar channel 1)
  • time (Time in seconds since volume start)
  • altitude (Altitude)
  • range (Range to measurement volume)
  • lat (North latitude)
  • alt (Altitude above mean sea level)
  • polarization_mode (Polarization mode)
  • altitude_agl (Altitude above ground level)
  • radar_beam_width_h (Radar beam width, horizontal channel)
  • time_coverage_end (Time corresponding to last radial in file)
  • antenna_transition (Antenna transition indicator, 1 if between sweeps, otherwise 0)
  • elevation (Elevation angle from horizontal)
  • radar_antenna_gain_v (Nominal radar antenna gain, v channel)
  • base_time (Base time in Epoch)
  • cross_polar_differential_phase (Cross-polar propagation phase shift)
  • longitude (Longitude)
  • sweep_number (Sweep number)
  • r_calib_time (Time of the calibration that applies to each ray)
  • latitude (Latitude)
  • platform_type (Platform type)
  • time_coverage_start (Time corresponding to first radial in file)
  • r_calib_radar_constant_h (Radar constant, horizontal copolar channel 1)
  • sweep_end_ray_index (Index of last ray in sweep, 0-based)
  • r_calib_receiver_gain_vx (Receiver gain for vertical cross-polar channel 2)
  • radar_measured_transmit_power_h (Radar measured transmit power, h channel)
  • radar_beam_width_v (Radar beam width, vertical channel)
  • sky_noise_xpol (Sky noise, cross-polar)
  • r_calib_noise_source_power_v (Noise power in noise source region for vertical cross-polar channel)
  • spectral_width (Spectrum width)
 
DQR ID: D170105.6    (Back to Top)
Start Date Start Time End Date End Time Data Quality Metric
2016-09-12 15:30:00 2016-10-27 18:05:00 Missing
Subject: ASI/KASACR/M1 - Failure of the UPS
Affected Datastreams: asikasacrzppiM1.a1
Description Radar was down due to a failure of the UPS. Data are missing.
Measurements
  • reflectivity (Equivalent reflectivity factor)
  • azimuth (Azimuth angle from true north)
  • follow_mode (Follow mode)
  • radar_antenna_gain_h (Nominal radar antenna gain, h channel)
  • r_calib_noise_vx (Noise floor for vertical cross-polar channel 2)
  • sky_noise_copol (Sky noise, copolar)
  • r_calib_pulse_width (Pulse width for this calibration)
  • sky_power_copol (Sky power, copolar)
  • volume_number (Volume number)
  • snr (Signal-to-noise-ratio)
  • mean_doppler_velocity (Mean Doppler velocity)
  • sweep_start_ray_index (Index of first ray in sweep, 0-based)
  • fixed_angle (Target angle for sweep)
  • prt_mode (PRT mode)
  • r_calib_receiver_gain_hc (Receiver gain for horizontal copolar channel 1)
  • r_calib_xmit_power_h (Transmit power)
  • sky_power_xpol (Sky power, cross-polar)
  • nyquist_velocity (Unambiguous Doppler velocity)
  • linear_depolarization_ratio (Linear depolarization ratio H)
  • r_calib_two_way_radome_loss_h (Two-way radome loss)
  • time_offset (Time offset from base_time)
  • scan_rate (Scan rate, positive for clockwise or increasing elevation)
  • co_to_crosspol_correlation_coeff (Copol to cross-polar correlation coefficient (also known as rhocx))
  • lon (East longitude)
  • r_calib_noise_source_power_v (Noise power in noise source region for vertical cross-polar channel)
  • instrument_type (Instrument type)
  • sweep_mode (Sweep mode)
  • r_calib_noise_hc (Noise floor power for horizontal copolar channel1)
  • frequency (Operating frequency)
  • pulse_width (Pulse width)
  • r_calib_radar_constant_v (Radar constant, vertical cross-polar channel 2)
  • unambiguous_range (Unambiguous range)
  • n_samples (Number of samples used to compute moments)
  • primary_axis (Primary axis of rotation)
  • prt (Pulse repetition time)
  • r_calib_index (Index for the calibration that applies to each ray)
  • r_calib_noise_source_power_h (Noise power in noise source region for horizontal copolar channel 1)
  • time (Time in seconds since volume start)
  • altitude (Altitude)
  • lat (North latitude)
  • range (Range to measurement volume)
  • polarization_mode (Polarization mode)
  • alt (Altitude above mean sea level)
  • altitude_agl (Altitude above ground level)
  • radar_beam_width_h (Radar beam width, horizontal channel)
  • time_coverage_end (Time corresponding to last radial in file)
  • antenna_transition (Antenna transition indicator, 1 if between sweeps, otherwise 0)
  • elevation (Elevation angle from horizontal)
  • radar_antenna_gain_v (Nominal radar antenna gain, v channel)
  • base_time (Base time in Epoch)
  • cross_polar_differential_phase (Cross-polar propagation phase shift)
  • sweep_number (Sweep number)
  • latitude (Latitude)
  • r_calib_time (Time of the calibration that applies to each ray)
  • platform_type (Platform type)
  • time_coverage_start (Time corresponding to first radial in file)
  • r_calib_radar_constant_h (Radar constant, horizontal copolar channel 1)
  • sweep_end_ray_index (Index of last ray in sweep, 0-based)
  • r_calib_receiver_gain_vx (Receiver gain for vertical cross-polar channel 2)
  • radar_measured_transmit_power_h (Radar measured transmit power, h channel)
  • radar_beam_width_v (Radar beam width, vertical channel)
  • sky_noise_xpol (Sky noise, cross-polar)
  • longitude (Longitude)
  • spectral_width (Spectrum width)