netcdf enaaafdewpointF1.b1.20180219.105940 {
dimensions:
	time = UNLIMITED ; // (14873 currently)
variables:
	int base_time ;
		base_time:string = "2018-02-19 00:00:00 0:00" ;
		base_time:long_name = "Base time in Epoch" ;
		base_time:units = "seconds since 1970-1-1 0:00:00 0:00" ;
		base_time:ancillary_variables = "time_offset" ;
	double time_offset(time) ;
		time_offset:long_name = "Time offset from base_time" ;
		time_offset:units = "seconds since 2018-02-19 00:00:00 0:00" ;
		time_offset:ancillary_variables = "base_time" ;
	double time(time) ;
		time:long_name = "Time offset from midnight" ;
		time:units = "seconds since 2018-02-19 00:00:00 0:00" ;
		time:standard_name = "time" ;
	float dewpoint_temperature(time) ;
		dewpoint_temperature:long_name = "Dewpoint temperature" ;
		dewpoint_temperature:units = "degC" ;
		dewpoint_temperature:standard_name = "dew_point_temperature" ;
		dewpoint_temperature:missing_value = -9999.f ;
		dewpoint_temperature:valid_min = -40.f ;
		dewpoint_temperature:valid_max = 60.f ;
		dewpoint_temperature:ancillary_variables = "qc_dewpoint_temperature" ;
	int qc_dewpoint_temperature(time) ;
		qc_dewpoint_temperature:long_name = "Quality check results on variable: Dewpoint temperature" ;
		qc_dewpoint_temperature:units = "1" ;
		qc_dewpoint_temperature:standard_name = "quality_flag" ;
		qc_dewpoint_temperature:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_dewpoint_temperature:flag_method = "bit" ;
		qc_dewpoint_temperature:bit_1_description = "Value is equal to missing_value." ;
		qc_dewpoint_temperature:bit_1_assessment = "Bad" ;
		qc_dewpoint_temperature:bit_2_description = "Value is less than valid_min." ;
		qc_dewpoint_temperature:bit_2_assessment = "Bad" ;
		qc_dewpoint_temperature:bit_3_description = "Value is greater than valid_max." ;
		qc_dewpoint_temperature:bit_3_assessment = "Bad" ;
	double lat(time) ;
		lat:long_name = "North latitude" ;
		lat:units = "degree_N" ;
		lat:standard_name = "latitude" ;
		lat:source = "enaaafnavdsm10hzF1.a1:lat" ;
		lat:missing_value = -9999. ;
		lat:valid_min = 35.5 ;
		lat:valid_max = 41.5 ;
		lat:ancillary_variables = "qc_lat" ;
	int qc_lat(time) ;
		qc_lat:long_name = "Quality check results on variable: North latitude" ;
		qc_lat:units = "1" ;
		qc_lat:standard_name = "quality_flag" ;
		qc_lat:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_lat:flag_method = "bit" ;
		qc_lat:bit_1_description = "Value is equal to missing_value." ;
		qc_lat:bit_1_assessment = "Bad" ;
		qc_lat:bit_2_description = "Value is less than valid_min." ;
		qc_lat:bit_2_assessment = "Bad" ;
		qc_lat:bit_3_description = "Value is greater than valid_max." ;
		qc_lat:bit_3_assessment = "Bad" ;
	double lon(time) ;
		lon:long_name = "East longitude" ;
		lon:units = "degree_E" ;
		lon:standard_name = "longitude" ;
		lon:source = "enaaafnavdsm10hzF1.a1:lon" ;
		lon:missing_value = -9999. ;
		lon:valid_min = -31.5 ;
		lon:valid_max = -24.5 ;
		lon:ancillary_variables = "qc_lon" ;
	int qc_lon(time) ;
		qc_lon:long_name = "Quality check results on variable: East longitude" ;
		qc_lon:units = "1" ;
		qc_lon:standard_name = "quality_flag" ;
		qc_lon:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_lon:flag_method = "bit" ;
		qc_lon:bit_1_description = "Value is equal to missing_value." ;
		qc_lon:bit_1_assessment = "Bad" ;
		qc_lon:bit_2_description = "Value is less than valid_min." ;
		qc_lon:bit_2_assessment = "Bad" ;
		qc_lon:bit_3_description = "Value is greater than valid_max." ;
		qc_lon:bit_3_assessment = "Bad" ;
	double alt(time) ;
		alt:long_name = "Altitude above mean sea level" ;
		alt:units = "m" ;
		alt:standard_name = "altitude" ;
		alt:source = "enaaafnavdsm10hzF1.a1:alt" ;
		alt:missing_value = -9999. ;
		alt:valid_min = 0. ;
		alt:valid_max = 8000. ;
		alt:ancillary_variables = "qc_alt" ;
	int qc_alt(time) ;
		qc_alt:long_name = "Quality check results on variable: Altitude above mean sea level" ;
		qc_alt:units = "1" ;
		qc_alt:standard_name = "quality_flag" ;
		qc_alt:description = "This variable contains bit-packed integer values, where each bit represents a QC test on the data. Non-zero bits indicate the QC condition given in the description for those bits; a value of 0 (no bits set) indicates the data has not failed any QC tests." ;
		qc_alt:flag_method = "bit" ;
		qc_alt:bit_1_description = "Value is equal to missing_value." ;
		qc_alt:bit_1_assessment = "Bad" ;
		qc_alt:bit_2_description = "Value is less than valid_min." ;
		qc_alt:bit_2_assessment = "Bad" ;
		qc_alt:bit_3_description = "Value is greater than valid_max." ;
		qc_alt:bit_3_assessment = "Bad" ;

// global attributes:
		:command_line = "aafdewpointcorr -s ena -f F1 -D" ;
		:Conventions = "ARM-1.3" ;
		:process_version = "ingest-aafdewpointcorr-1.0-0.el7" ;
		:dod_version = "aafdewpoint-b1-1.0" ;
		:input_datastreams = "enaaafdewpointF1.a1 : 1.5 : 20180219.104115\n",
			"enaaafnavF1.b1 : 1.1 : 20180219.105940" ;
		:site_id = "ena" ;
		:platform_id = "aafdewpoint" ;
		:facility_id = "F1" ;
		:data_level = "b1" ;
		:location_description = "Eastern North Atlantic (ENA), Gulfstream 159 (\"G1\") Aircraft" ;
		:datastream = "enaaafdewpointF1.b1" ;
		:doi = "10.5439/2341306" ;
		:history = "created by user burk on machine prod-proc5.adc.arm.gov at 2024-05-13 20:51:13, using ingest-aafdewpointcorr-1.0-0.el7" ;
}